The new property will allow to specify the range of GIC hwirqs to use for IPIs.
This is an optinal property. We preserve the previous behaviour of allocating
the last 2 * gic_vpes if it's not specified or DT is not supported.
Signed-off-by: Qais Yousef <qais.yousef@xxxxxxxxxx>
Acked-by: Rob Herring <robh@xxxxxxxxxx>
---
.../devicetree/bindings/interrupt-controller/mips-gic.txt | 7 +++++++
drivers/irqchip/irq-mips-gic.c | 12 ++++++++++--
2 files changed, 17 insertions(+), 2 deletions(-)
diff --git a/Documentation/devicetree/bindings/interrupt-controller/mips-gic.txt b/Documentation/devicetree/bindings/interrupt-controller/mips-gic.txt
index aae4c384ee1f..173595305e26 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/mips-gic.txt
+++ b/Documentation/devicetree/bindings/interrupt-controller/mips-gic.txt
@@ -23,6 +23,12 @@ Optional properties:
- mti,reserved-cpu-vectors : Specifies the list of CPU interrupt vectors
to which the GIC may not route interrupts. Valid values are 2 - 7.
This property is ignored if the CPU is started in EIC mode.
+- mti,reserved-ipi-vectors : Specifies the range of GIC interrupts that are
+ reserved for IPIs.
+ It accepts 2 values, the 1st is the starting interrupt and the 2nd is the size
+ of the reserved range.
+ If not specified, the driver will allocate the last 2 * number of VPEs in the
+ system.
Required properties for timer sub-node:
- compatible : Should be "mti,gic-timer".
@@ -44,6 +50,7 @@ Example:
#interrupt-cells = <3>;
mti,reserved-cpu-vectors = <7>;
+ mti,reserved-ipi-vectors = <40 8>;
timer {
compatible = "mti,gic-timer";
diff --git a/drivers/irqchip/irq-mips-gic.c b/drivers/irqchip/irq-mips-gic.c
index 8c86d9361a6f..d9535a308788 100644
--- a/drivers/irqchip/irq-mips-gic.c
+++ b/drivers/irqchip/irq-mips-gic.c
@@ -957,6 +957,7 @@ static void __init __gic_init(unsigned long gic_base_addr,
struct device_node *node)
{
unsigned int gicconfig;
+ unsigned int v[2];
__gic_base_addr = gic_base_addr;
@@ -1027,8 +1028,15 @@ static void __init __gic_init(unsigned long gic_base_addr,
gic_ipi_domain->bus_token = DOMAIN_BUS_IPI;
- /* Make the last 2 * gic_vpes available for IPIs */
- bitmap_set(ipi_resrv, gic_shared_intrs - 2 * gic_vpes, 2 * gic_vpes);
+ if (node &&
+ !of_property_read_u32_array(node, "mti,reserved-ipi-vectors", v, 2)) {
+ bitmap_set(ipi_resrv, v[0], v[1]);
+ } else {
+ /* Make the last 2 * gic_vpes available for IPIs */
+ bitmap_set(ipi_resrv,
+ gic_shared_intrs - 2 * gic_vpes,
+ 2 * gic_vpes);
+ }
gic_basic_init();
}
--
2.1.0
