Re: [PATCH v2 1/4] pinctrl/lantiq: updating devicetree binding description

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, Nov 25, 2015 at 11:18:56AM +0100, Martin Schiller wrote:
> This patch adds the new dedicated "lantiq,<chip>-pinctrl" compatible strings
> to the devicetree bindings Documentation, where <chip> is one of "ase",
> "danube", "xrx100", "xrx200" or "xrx300" and marks the "lantiq,pinctrl-xway",
> "lantiq,pinctrl-ase" and "lantiq,pinctrl-xr9" compatible strings as DEPRECATED.
> 
> Signed-off-by: Martin Schiller <mschiller@xxxxxx>

Acked-by: Rob Herring <robh@xxxxxxxxxx>

> ---
>  .../bindings/pinctrl/lantiq,pinctrl-xway.txt       | 110 +++++++++++++++++++--
>  1 file changed, 102 insertions(+), 8 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/pinctrl/lantiq,pinctrl-xway.txt b/Documentation/devicetree/bindings/pinctrl/lantiq,pinctrl-xway.txt
> index e89b467..8e5216b 100644
> --- a/Documentation/devicetree/bindings/pinctrl/lantiq,pinctrl-xway.txt
> +++ b/Documentation/devicetree/bindings/pinctrl/lantiq,pinctrl-xway.txt
> @@ -1,7 +1,16 @@
>  Lantiq XWAY pinmux controller
>  
>  Required properties:
> -- compatible: "lantiq,pinctrl-xway" or "lantiq,pinctrl-xr9"
> +- compatible: "lantiq,pinctrl-xway", (DEPRECATED: Use "lantiq,pinctrl-danube")
> +	      "lantiq,pinctrl-xr9", (DEPRECATED: Use "lantiq,xrx100-pinctrl" or
> +					"lantiq,xrx200-pinctrl")
> +	      "lantiq,pinctrl-ase", (DEPRECATED: Use "lantiq,ase-pinctrl")
> +	      "lantiq,<chip>-pinctrl", where <chip> is:
> +		"ase" (XWAY AMAZON Family)
> +		"danube" (XWAY DANUBE Family)
> +		"xrx100" (XWAY xRX100 Family)
> +		"xrx200" (XWAY xRX200 Family)
> +		"xrx300" (XWAY xRX300 Family)
>  - reg: Should contain the physical address and length of the gpio/pinmux
>    register range
>  
> @@ -36,19 +45,87 @@ Required subnode-properties:
>  
>  Valid values for group and function names:
>  
> +XWAY: (DEPRECATED: Use DANUBE)
>    mux groups:
>      exin0, exin1, exin2, jtag, ebu a23, ebu a24, ebu a25, ebu clk, ebu cs1,
>      ebu wait, nand ale, nand cs1, nand cle, spi, spi_cs1, spi_cs2, spi_cs3,
> -    spi_cs4, spi_cs5, spi_cs6, asc0, asc0 cts rts, stp, nmi , gpt1, gpt2,
> +    spi_cs4, spi_cs5, spi_cs6, asc0, asc0 cts rts, stp, nmi, gpt1, gpt2,
>      gpt3, clkout0, clkout1, clkout2, clkout3, gnt1, gnt2, gnt3, req1, req2,
>      req3
>  
> -  additional mux groups (XR9 only):
> -    mdio, nand rdy, nand rd, exin3, exin4, gnt4, req4
> +  functions:
> +    spi, asc, cgu, jtag, exin, stp, gpt, nmi, pci, ebu
> +
> +XR9: ( DEPRECATED: Use xRX100/xRX200)
> +  mux groups:
> +    exin0, exin1, exin2, exin3, exin4, jtag, ebu a23, ebu a24, ebu a25,
> +    ebu clk, ebu cs1, ebu wait, nand ale, nand cs1, nand cle, nand rdy,
> +    nand rd, spi, spi_cs1, spi_cs2, spi_cs3, spi_cs4, spi_cs5, spi_cs6,
> +    asc0, asc0 cts rts, stp, nmi, gpt1, gpt2, gpt3, clkout0, clkout1,
> +    clkout2, clkout3, gnt1, gnt2, gnt3, gnt4, req1, req2, req3, req4, mdio,
> +    gphy0 led0, gphy0 led1, gphy0 led2, gphy1 led0, gphy1 led1, gphy1 led2
> +
> +  functions:
> +    spi, asc, cgu, jtag, exin, stp, gpt, nmi, pci, ebu, mdio, gphy
> +
> +AMAZON:
> +  mux groups:
> +    exin0, exin1, exin2, jtag, spi_di, spi_do, spi_clk, spi_cs1, spi_cs2,
> +    spi_cs3, spi_cs4, spi_cs5, spi_cs6, asc, stp, gpt1, gpt2, gpt3, clkout0,
> +    clkout1, clkout2, mdio, dfe led0, dfe led1, ephy led0, ephy led1, ephy led2
> +
> +  functions:
> +    spi, asc, cgu, jtag, exin, stp, gpt, mdio, ephy, dfe
> +
> +DANUBE:
> +  mux groups:
> +    exin0, exin1, exin2, jtag, ebu a23, ebu a24, ebu a25, ebu clk, ebu cs1,
> +    ebu wait, nand ale, nand cs1, nand cle, spi_di, spi_do, spi_clk, spi_cs1,
> +    spi_cs2, spi_cs3, spi_cs4, spi_cs5, spi_cs6, asc0, asc0 cts rts, stp, nmi,
> +    gpt1, gpt2, gpt3, clkout0, clkout1, clkout2, clkout3, gnt1, gnt2, gnt3,
> +    req1, req2, req3, dfe led0, dfe led1
>  
>    functions:
> -    spi, asc, cgu, jtag, exin, stp, gpt, nmi, pci, ebu, mdio
> +    spi, asc, cgu, jtag, exin, stp, gpt, nmi, pci, ebu, dfe
>  
> +xRX100:
> +  mux groups:
> +    exin0, exin1, exin2, exin3, exin4, ebu a23, ebu a24, ebu a25, ebu clk,
> +    ebu cs1, ebu wait, nand ale, nand cs1, nand cle, nand rdy, nand rd,
> +    spi_di, spi_do, spi_clk, spi_cs1, spi_cs2, spi_cs3, spi_cs4, spi_cs5,
> +    spi_cs6, asc0, asc0 cts rts, stp, nmi, gpt1, gpt2, gpt3, clkout0, clkout1,
> +    clkout2, clkout3, gnt1, gnt2, gnt3, gnt4, req1, req2, req3, req4, mdio,
> +    dfe led0, dfe led1
> +
> +  functions:
> +    spi, asc, cgu, exin, stp, gpt, nmi, pci, ebu, mdio, dfe
> +
> +xRX200:
> +  mux groups:
> +    exin0, exin1, exin2, exin3, exin4, ebu a23, ebu a24, ebu a25, ebu clk,
> +    ebu cs1, ebu wait, nand ale, nand cs1, nand cle, nand rdy, nand rd,
> +    spi_di, spi_do, spi_clk, spi_cs1, spi_cs2, spi_cs3, spi_cs4, spi_cs5,
> +    spi_cs6, usif uart_rx, usif uart_tx, usif uart_rts, usif uart_cts,
> +    usif uart_dtr, usif uart_dsr, usif uart_dcd, usif uart_ri, usif spi_di,
> +    usif spi_do, usif spi_clk, usif spi_cs0, usif spi_cs1, usif spi_cs2,
> +    stp, nmi, gpt1, gpt2, gpt3, clkout0, clkout1, clkout2, clkout3, gnt1,
> +    gnt2, gnt3, gnt4, req1, req2, req3, req4, mdio, dfe led0, dfe led1,
> +    gphy0 led0, gphy0 led1, gphy0 led2, gphy1 led0, gphy1 led1, gphy1 led2
> +
> +  functions:
> +    spi, usif, cgu, exin, stp, gpt, nmi, pci, ebu, mdio, dfe, gphy
> +
> +xRX300:
> +  mux groups:
> +    exin0, exin1, exin2, exin4, nand ale, nand cs0, nand cs1, nand cle,
> +    nand rdy, nand rd, nand_d0, nand_d1, nand_d2, nand_d3, nand_d4, nand_d5,
> +    nand_d6, nand_d7, nand_d1, nand wr, nand wp, nand se, spi_di, spi_do,
> +    spi_clk, spi_cs1, spi_cs4, spi_cs6, usif uart_rx, usif uart_tx,
> +    usif spi_di, usif spi_do, usif spi_clk, usif spi_cs0, stp, clkout2,
> +    mdio, dfe led0, dfe led1, ephy0 led0, ephy0 led1, ephy1 led0, ephy1 led1
> +
> +  functions:
> +    spi, usif, cgu, exin, stp, ebu, mdio, dfe, ephy
>  
>  
>  Definition of pin configurations:
> @@ -62,15 +139,32 @@ Optional subnode-properties:
>      0: none, 1: down, 2: up.
>  - lantiq,open-drain: Boolean, enables open-drain on the defined pin.
>  
> -Valid values for XWAY pin names:
> +Valid values for XWAY pin names: (DEPRECATED: Use DANUBE)
>    Pinconf pins can be referenced via the names io0-io31.
>  
> -Valid values for XR9 pin names:
> +Valid values for XR9 pin names: (DEPRECATED: Use xrX100/xRX200)
>    Pinconf pins can be referenced via the names io0-io55.
>  
> +Valid values for AMAZON pin names:
> +  Pinconf pins can be referenced via the names io0-io31.
> +
> +Valid values for DANUBE pin names:
> +  Pinconf pins can be referenced via the names io0-io31.
> +
> +Valid values for xRX100 pin names:
> +  Pinconf pins can be referenced via the names io0-io55.
> +
> +Valid values for xRX200 pin names:
> +  Pinconf pins can be referenced via the names io0-io49.
> +
> +Valid values for xRX300 pin names:
> +  Pinconf pins can be referenced via the names io0-io1,io3-io6,io8-io11,
> +						io13-io19,io23-io27,io34-io36,
> +						io42-io43,io48-io61.
> +
>  Example:
>  	gpio: pinmux@E100B10 {
> -		compatible = "lantiq,pinctrl-xway";
> +		compatible = "lantiq,danube-pinctrl";
>  		pinctrl-names = "default";
>  		pinctrl-0 = <&state_default>;
>  
> -- 
> 2.1.4
> 
> --
> To unsubscribe from this list: send the line "unsubscribe devicetree" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux MIPS Home]     [LKML Archive]     [Linux ARM Kernel]     [Linux ARM]     [Linux]     [Git]     [Yosemite News]     [Linux SCSI]     [Linux Hams]

  Powered by Linux