[PATCH 07/10] phy: phy_brcmstb_sata: add support 40nm platforms

[Jaedon Shin <jaedon.shin@xxxxxxxxx>]

Add offsets for 40nm BMIPS based set-top box platforms.

Signed-off-by: Jaedon Shin <jaedon.shin@xxxxxxxxx>
---
 drivers/phy/phy-brcmstb-sata.c | 21 ++++++++++++++-------
 1 file changed, 14 insertions(+), 7 deletions(-)

diff --git a/drivers/phy/phy-brcmstb-sata.c b/drivers/phy/phy-brcmstb-sata.c
index 41c7535d706b..1cc80743b1b6 100644
--- a/drivers/phy/phy-brcmstb-sata.c
+++ b/drivers/phy/phy-brcmstb-sata.c
@@ -30,7 +30,8 @@
 #define MAX_PORTS					2
 
 /* Register offset between PHYs in PCB space */
-#define SATA_MDIO_REG_SPACE_SIZE			0x1000
+#define SATA_MDIO_REG_28NM_SPACE_SIZE			0x1000
+#define SATA_MDIO_REG_40NM_SPACE_SIZE			0x10
 
 struct brcm_sata_port {
 	int portnum;
@@ -47,7 +48,7 @@ struct brcm_sata_phy {
 	struct brcm_sata_port phys[MAX_PORTS];
 };
 
-enum sata_mdio_phy_regs_28nm {
+enum sata_mdio_phy_regs {
 	PLL_REG_BANK_0				= 0x50,
 	PLL_REG_BANK_0_PLLCONTROL_0		= 0x81,
 
@@ -85,7 +86,7 @@ static void brcm_sata_mdio_wr(void __iomem *addr, u32 bank, u32 ofs,
 #define FMAX_VAL_DEFAULT	0x3df
 #define FMAX_VAL_SSC		0x83
 
-static void brcm_sata_cfg_ssc_28nm(struct brcm_sata_port *port)
+static void brcm_sata_cfg_ssc(struct brcm_sata_port *port)
 {
 	void __iomem *base = brcm_sata_phy_base(port);
 	struct brcm_sata_phy *priv = port->phy_priv;
@@ -116,19 +117,25 @@ static int brcm_sata_phy_init(struct phy *phy)
 {
 	struct brcm_sata_port *port = phy_get_drvdata(phy);
 
-	brcm_sata_cfg_ssc_28nm(port);
+	brcm_sata_cfg_ssc(port);
 
 	return 0;
 }
 
-static const struct phy_ops phy_ops_28nm = {
+static const struct phy_ops phy_ops = {
 	.init		= brcm_sata_phy_init,
 	.owner		= THIS_MODULE,
 };
 
 static const struct of_device_id brcm_sata_phy_of_match[] = {
 	{ .compatible	= "brcm,bcm7445-sata-phy",
-			.data = (void *)SATA_MDIO_REG_SPACE_SIZE },
+			.data = (void *)SATA_MDIO_REG_28NM_SPACE_SIZE },
+	{ .compatible   = "brcm,bcm7346-sata-phy",
+			.data = (void *)SATA_MDIO_REG_40NM_SPACE_SIZE },
+	{ .compatible   = "brcm,bcm7360-sata-phy",
+			.data = (void *)SATA_MDIO_REG_40NM_SPACE_SIZE },
+	{ .compatible   = "brcm,bcm7362-sata-phy",
+			.data = (void *)SATA_MDIO_REG_40NM_SPACE_SIZE },
 	{},
 };
 MODULE_DEVICE_TABLE(of, brcm_sata_phy_of_match);
@@ -185,7 +192,7 @@ static int brcm_sata_phy_probe(struct platform_device *pdev)
 		port = &priv->phys[id];
 		port->portnum = id;
 		port->phy_priv = priv;
-		port->phy = devm_phy_create(dev, child, &phy_ops_28nm);
+		port->phy = devm_phy_create(dev, child, &phy_ops);
 		port->ssc_en = of_property_read_bool(child, "brcm,enable-ssc");
 		if (IS_ERR(port->phy)) {
 			dev_err(dev, "failed to create PHY\n");
-- 
2.6.2