gic_handle_shared_int reads the GIC interrupt pending & mask registers directly into a bitmap, which is defined as an array of unsigned longs. The GIC pending registers may be 32 bits wide if the CM is older than CM3, regardless of the bit width of the CPU, but for MIPS64 kernels the unsigned longs in the bitmap will be 64 bits wide. In this case we need to perform 2 x 32 bit reads per 64 bit unsigned long in order to avoid missing interrupts. Signed-off-by: Paul Burton <paul.burton@xxxxxxxxxx> --- drivers/irqchip/irq-mips-gic.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/drivers/irqchip/irq-mips-gic.c b/drivers/irqchip/irq-mips-gic.c index 842a53d..aeaa061 100644 --- a/drivers/irqchip/irq-mips-gic.c +++ b/drivers/irqchip/irq-mips-gic.c @@ -320,6 +320,14 @@ static void gic_handle_shared_int(bool chained) intrmask[i] = gic_read(intrmask_reg); pending_reg += gic_reg_step; intrmask_reg += gic_reg_step; + + if (!config_enabled(CONFIG_64BIT) || mips_cm_is64) + continue; + + pending[i] |= (u64)gic_read(pending_reg) << 32; + intrmask[i] |= (u64)gic_read(intrmask_reg) << 32; + pending_reg += gic_reg_step; + intrmask_reg += gic_reg_step; } bitmap_and(pending, pending, intrmask, gic_shared_intrs); -- 2.5.3
