From: Joshua Kinard <kumba@xxxxxxxxxx>
This patch adds a hook, "pre_enable", to the core MIPS PCI code. It is
used by the IP30 Port to setup the PCI resources prior to probing the
BRIDGE and detecting available PCI devices. It also adds some minor
whitespace to improve readability.
Signed-off-by: Joshua Kinard <kumba@xxxxxxxxxx>
---
arch/mips/include/asm/pci.h | 3 +++
arch/mips/pci/pci.c | 10 ++++++++--
2 files changed, 11 insertions(+), 2 deletions(-)
This version is diff'ed against the post-4.2/pre-4.3 tree.
linux-mips-pci-pre_enable.patch
diff --git a/arch/mips/include/asm/pci.h b/arch/mips/include/asm/pci.h
index 98c31e5..0acee98 100644
--- a/arch/mips/include/asm/pci.h
+++ b/arch/mips/include/asm/pci.h
@@ -43,6 +43,9 @@ struct pci_controller {
and XFree86. Eventually will be removed. */
unsigned int need_domain_info;
+ /* called in pcibios_enable_resources */
+ int (*pre_enable)(struct pci_controller *, struct pci_dev *, int);
+
int iommu;
/* Optional access methods for reading/writing the bus number
diff --git a/arch/mips/pci/pci.c b/arch/mips/pci/pci.c
index c6996cf..02e3103 100644
--- a/arch/mips/pci/pci.c
+++ b/arch/mips/pci/pci.c
@@ -261,14 +261,19 @@ static int pcibios_enable_resources(struct pci_dev *dev, int mask)
u16 cmd, old_cmd;
int idx;
struct resource *r;
+ struct pci_controller *hose = (struct pci_controller *)dev->sysdata;
pci_read_config_word(dev, PCI_COMMAND, &cmd);
old_cmd = cmd;
- for (idx=0; idx < PCI_NUM_RESOURCES; idx++) {
+ for (idx = 0; idx < PCI_NUM_RESOURCES; idx++) {
/* Only set up the requested stuff */
- if (!(mask & (1<<idx)))
+ if (!(mask & (1 << idx)))
continue;
+ if (hose->pre_enable)
+ if (hose->pre_enable(hose, dev, idx) < 0)
+ return -EINVAL;
+
r = &dev->resource[idx];
if (!(r->flags & (IORESOURCE_IO | IORESOURCE_MEM)))
continue;
@@ -291,6 +296,7 @@ static int pcibios_enable_resources(struct pci_dev *dev, int mask)
pci_name(dev), old_cmd, cmd);
pci_write_config_word(dev, PCI_COMMAND, cmd);
}
+
return 0;
}
