On 07.08.2015 02:33, David Daney wrote:
From: David Daney <david.daney@xxxxxxxxxx>
Find out which PHYs belong to which BGX instance in the ACPI way.
Set the MAC address of the device as provided by ACPI tables. This is
similar to the implementation for devicetree in
of_get_mac_address(). The table is searched for the device property
entries "mac-address", "local-mac-address" and "address" in that
order. The address is provided in a u64 variable and must contain a
valid 6 bytes-len mac addr.
Based on code from: Narinder Dhillon <ndhillon@xxxxxxxxxx>
Tomasz Nowicki <tomasz.nowicki@xxxxxxxxxx>
Robert Richter <rrichter@xxxxxxxxxx>
Signed-off-by: Tomasz Nowicki <tomasz.nowicki@xxxxxxxxxx>
Signed-off-by: Robert Richter <rrichter@xxxxxxxxxx>
Signed-off-by: David Daney <david.daney@xxxxxxxxxx>
---
drivers/net/ethernet/cavium/thunder/thunder_bgx.c | 137 +++++++++++++++++++++-
1 file changed, 135 insertions(+), 2 deletions(-)
diff --git a/drivers/net/ethernet/cavium/thunder/thunder_bgx.c b/drivers/net/ethernet/cavium/thunder/thunder_bgx.c
index 615b2af..2056583 100644
--- a/drivers/net/ethernet/cavium/thunder/thunder_bgx.c
+++ b/drivers/net/ethernet/cavium/thunder/thunder_bgx.c
@@ -6,6 +6,7 @@
* as published by the Free Software Foundation.
*/
+#include <linux/acpi.h>
#include <linux/module.h>
#include <linux/interrupt.h>
#include <linux/pci.h>
@@ -26,7 +27,7 @@
struct lmac {
struct bgx *bgx;
int dmac;
- unsigned char mac[ETH_ALEN];
+ u8 mac[ETH_ALEN];
bool link_up;
int lmacid; /* ID within BGX */
int lmacid_bd; /* ID on board */
@@ -835,6 +836,133 @@ static void bgx_get_qlm_mode(struct bgx *bgx)
}
}
+#ifdef CONFIG_ACPI
+
+static int bgx_match_phy_id(struct device *dev, void *data)
+{
+ struct phy_device *phydev = to_phy_device(dev);
+ u32 *phy_id = data;
+
+ if (phydev->addr == *phy_id)
+ return 1;
+
+ return 0;
+}
+
+static const char * const addr_propnames[] = {
+ "mac-address",
+ "local-mac-address",
+ "address",
+};
+
+static int acpi_get_mac_address(struct acpi_device *adev, u8 *dst)
+{
+ const union acpi_object *prop;
+ u64 mac_val;
+ u8 mac[ETH_ALEN];
+ int i, j;
+ int ret;
+
+ for (i = 0; i < ARRAY_SIZE(addr_propnames); i++) {
+ ret = acpi_dev_get_property(adev, addr_propnames[i],
+ ACPI_TYPE_INTEGER, &prop);
+ if (ret)
+ continue;
+
+ mac_val = prop->integer.value;
+
+ if (mac_val & (~0ULL << 48))
+ continue; /* more than 6 bytes */
+
+ for (j = 0; j < ARRAY_SIZE(mac); j++)
+ mac[j] = (u8)(mac_val >> (8 * j));
+ if (!is_valid_ether_addr(mac))
+ continue;
+
+ memcpy(dst, mac, ETH_ALEN);
+
+ return 0;
+ }
+
+ return ret ? ret : -EINVAL;
+}
+
+static acpi_status bgx_acpi_register_phy(acpi_handle handle,
+ u32 lvl, void *context, void **rv)
+{
+ struct acpi_reference_args args;
+ const union acpi_object *prop;
+ struct bgx *bgx = context;
+ struct acpi_device *adev;
+ struct device *phy_dev;
+ u32 phy_id;
+
+ if (acpi_bus_get_device(handle, &adev))
+ goto out;
+
+ SET_NETDEV_DEV(&bgx->lmac[bgx->lmac_count].netdev, &bgx->pdev->dev);
+
+ acpi_get_mac_address(adev, bgx->lmac[bgx->lmac_count].mac);
+
+ bgx->lmac[bgx->lmac_count].lmacid = bgx->lmac_count;
+
+ if (acpi_dev_get_property_reference(adev, "phy-handle", 0, &args))
+ goto out;
+
+ if (acpi_dev_get_property(args.adev, "phy-channel", ACPI_TYPE_INTEGER, &prop))
+ goto out;
+
+ phy_id = prop->integer.value;
+
+ phy_dev = bus_find_device(&mdio_bus_type, NULL, (void *)&phy_id,
+ bgx_match_phy_id);
+ if (!phy_dev)
+ goto out;
+
+ bgx->lmac[bgx->lmac_count].phydev = to_phy_device(phy_dev);
+out:
+ bgx->lmac_count++;
+ return AE_OK;
+}
+
+static acpi_status bgx_acpi_match_id(acpi_handle handle, u32 lvl,
+ void *context, void **ret_val)
+{
+ struct acpi_buffer string = { ACPI_ALLOCATE_BUFFER, NULL };
+ struct bgx *bgx = context;
+ char bgx_sel[5];
+
+ snprintf(bgx_sel, 5, "BGX%d", bgx->bgx_id);
+ if (ACPI_FAILURE(acpi_get_name(handle, ACPI_SINGLE_NAME, &string))) {
+ pr_warn("Invalid link device\n");
+ return AE_OK;
+ }
+
+ if (strncmp(string.pointer, bgx_sel, 4))
+ return AE_OK;
+
+ acpi_walk_namespace(ACPI_TYPE_DEVICE, handle, 1,
+ bgx_acpi_register_phy, NULL, bgx, NULL);
+
+ kfree(string.pointer);
+ return AE_CTRL_TERMINATE;
+}
+
+static int bgx_init_acpi_phy(struct bgx *bgx)
+{
+ acpi_get_devices(NULL, bgx_acpi_match_id, bgx, (void **)NULL);
+ return 0;
+}
+
+#else
+
+static int bgx_init_acpi_phy(struct bgx *bgx)
+{
+ return -ENODEV;
+}
+
+#endif /* CONFIG_ACPI */
+
#if IS_ENABLED(CONFIG_OF_MDIO)
static int bgx_init_of_phy(struct bgx *bgx)
@@ -882,7 +1010,12 @@ static int bgx_init_of_phy(struct bgx *bgx)
static int bgx_init_phy(struct bgx *bgx)
{
- return bgx_init_of_phy(bgx);
+ int err = bgx_init_of_phy(bgx);
+
+ if (err != -ENODEV)
+ return err;
+
+ return bgx_init_acpi_phy(bgx);
}
If kernel can work with DT and ACPI (both compiled in), it should take
only one path instead of probing DT and ACPI sequentially. How about:
@@ -902,10 +925,9 @@ static int bgx_probe(struct pci_dev *pdev, const
struct pci_device_id *ent)
bgx_vnic[bgx->bgx_id] = bgx;
bgx_get_qlm_mode(bgx);
- snprintf(bgx_sel, 5, "bgx%d", bgx->bgx_id);
- np = of_find_node_by_name(NULL, bgx_sel);
- if (np)
- bgx_init_of(bgx, np);
+ err = acpi_disabled ? bgx_init_of_phy(bgx) : bgx_init_acpi_phy(bgx);
+ if (err)
+ goto err_enable;
bgx_init_hw(bgx);
Regards,
Tomasz
