[PATCH 08/19] MIPS: support CM3 L2 cache

[Markos Chandras <markos.chandras@xxxxxxxxxx>]

From: Paul Burton <paul.burton@xxxxxxxxxx>

Detect the L2 cache configuration from GCR_L2_CONFIG when a CM3 is
present in the system, rather than from Config2 which does not expose
the L2 configuration on I6400.

Signed-off-by: Paul Burton <paul.burton@xxxxxxxxxx>
Signed-off-by: Markos Chandras <markos.chandras@xxxxxxxxxx>
---
 arch/mips/mm/sc-mips.c | 32 ++++++++++++++++++++++++++++++++
 1 file changed, 32 insertions(+)

diff --git a/arch/mips/mm/sc-mips.c b/arch/mips/mm/sc-mips.c
index 4ceafd13870c..5fa452e8cff9 100644
--- a/arch/mips/mm/sc-mips.c
+++ b/arch/mips/mm/sc-mips.c
@@ -14,6 +14,7 @@
 #include <asm/pgtable.h>
 #include <asm/mmu_context.h>
 #include <asm/r4kcache.h>
+#include <asm/mips-cm.h>
 
 /*
  * MIPS32/MIPS64 L2 cache handling
@@ -94,6 +95,34 @@ static inline int mips_sc_is_activated(struct cpuinfo_mips *c)
 	return 1;
 }
 
+static int __init mips_sc_probe_cm3(void)
+{
+	struct cpuinfo_mips *c = &current_cpu_data;
+	unsigned long cfg = read_gcr_l2_config();
+	unsigned long sets, line_sz, assoc;
+
+	if (cfg & CM_GCR_L2_CONFIG_BYPASS_MSK)
+		return 0;
+
+	sets = cfg & CM_GCR_L2_CONFIG_SET_SIZE_MSK;
+	sets >>= CM_GCR_L2_CONFIG_SET_SIZE_SHF;
+	c->scache.sets = 64 << sets;
+
+	line_sz = cfg & CM_GCR_L2_CONFIG_LINE_SIZE_MSK;
+	line_sz >>= CM_GCR_L2_CONFIG_LINE_SIZE_SHF;
+	c->scache.linesz = 2 << line_sz;
+
+	assoc = cfg & CM_GCR_L2_CONFIG_ASSOC_MSK;
+	assoc >>= CM_GCR_L2_CONFIG_ASSOC_SHF;
+	c->scache.ways = assoc + 1;
+	c->scache.waysize = c->scache.sets * c->scache.linesz;
+	c->scache.waybit = __ffs(c->scache.waysize);
+
+	c->scache.flags &= ~MIPS_CACHE_NOT_PRESENT;
+
+	return 1;
+}
+
 static inline int __init mips_sc_probe(void)
 {
 	struct cpuinfo_mips *c = &current_cpu_data;
@@ -103,6 +132,9 @@ static inline int __init mips_sc_probe(void)
 	/* Mark as not present until probe completed */
 	c->scache.flags |= MIPS_CACHE_NOT_PRESENT;
 
+	if (mips_cm_revision() >= CM_REV_CM3)
+		return mips_sc_probe_cm3();
+
 	/* Ignore anything but MIPSxx processors */
 	if (!(c->isa_level & (MIPS_CPU_ISA_M32R1 | MIPS_CPU_ISA_M32R2 |
 			      MIPS_CPU_ISA_M32R6 | MIPS_CPU_ISA_M64R1 |
-- 
2.4.5