[PATCH 04/14] MIPS/cevt-bcm1480: Migrate to new 'set-state' interface

[Viresh Kumar <viresh.kumar@xxxxxxxxxx>]

Migrate cevt-bcm1480 driver to the new 'set-state' interface provided by
clockevents core, the earlier 'set-mode' interface is marked obsolete
now.

This also enables us to implement callbacks for new states of clockevent
devices, for example: ONESHOT_STOPPED.

Read operation on R_SCD_TIMER_CFG and R_SCD_TIMER_INIT registers isn't
performed now for many modes as there returned values aren't used.

Cc: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
Signed-off-by: Viresh Kumar <viresh.kumar@xxxxxxxxxx>
---
 arch/mips/kernel/cevt-bcm1480.c | 44 ++++++++++++++++++++---------------------
 1 file changed, 22 insertions(+), 22 deletions(-)

diff --git a/arch/mips/kernel/cevt-bcm1480.c b/arch/mips/kernel/cevt-bcm1480.c
index 7976457184b1..940ac00e9129 100644
--- a/arch/mips/kernel/cevt-bcm1480.c
+++ b/arch/mips/kernel/cevt-bcm1480.c
@@ -40,8 +40,8 @@
  * The general purpose timer ticks at 1MHz independent if
  * the rest of the system
  */
-static void sibyte_set_mode(enum clock_event_mode mode,
-			   struct clock_event_device *evt)
+
+static int sibyte_set_periodic(struct clock_event_device *evt)
 {
 	unsigned int cpu = smp_processor_id();
 	void __iomem *cfg, *init;
@@ -49,24 +49,22 @@ static void sibyte_set_mode(enum clock_event_mode mode,
 	cfg = IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_CFG));
 	init = IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_INIT));
 
-	switch (mode) {
-	case CLOCK_EVT_MODE_PERIODIC:
-		__raw_writeq(0, cfg);
-		__raw_writeq((V_SCD_TIMER_FREQ / HZ) - 1, init);
-		__raw_writeq(M_SCD_TIMER_ENABLE | M_SCD_TIMER_MODE_CONTINUOUS,
-			     cfg);
-		break;
-
-	case CLOCK_EVT_MODE_ONESHOT:
-		/* Stop the timer until we actually program a shot */
-	case CLOCK_EVT_MODE_SHUTDOWN:
-		__raw_writeq(0, cfg);
-		break;
-
-	case CLOCK_EVT_MODE_UNUSED:	/* shuddup gcc */
-	case CLOCK_EVT_MODE_RESUME:
-		;
-	}
+	__raw_writeq(0, cfg);
+	__raw_writeq((V_SCD_TIMER_FREQ / HZ) - 1, init);
+	__raw_writeq(M_SCD_TIMER_ENABLE | M_SCD_TIMER_MODE_CONTINUOUS, cfg);
+	return 0;
+}
+
+static int sibyte_shutdown(struct clock_event_device *evt)
+{
+	unsigned int cpu = smp_processor_id();
+	void __iomem *cfg;
+
+	cfg = IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_CFG));
+
+	/* Stop the timer until we actually program a shot */
+	__raw_writeq(0, cfg);
+	return 0;
 }
 
 static int sibyte_next_event(unsigned long delta, struct clock_event_device *cd)
@@ -91,7 +89,7 @@ static irqreturn_t sibyte_counter_handler(int irq, void *dev_id)
 	void __iomem *cfg;
 	unsigned long tmode;
 
-	if (cd->mode == CLOCK_EVT_MODE_PERIODIC)
+	if (clockevent_state_periodic(cd))
 		tmode = M_SCD_TIMER_ENABLE | M_SCD_TIMER_MODE_CONTINUOUS;
 	else
 		tmode = 0;
@@ -130,7 +128,9 @@ void sb1480_clockevent_init(void)
 	cd->irq			= irq;
 	cd->cpumask		= cpumask_of(cpu);
 	cd->set_next_event	= sibyte_next_event;
-	cd->set_mode		= sibyte_set_mode;
+	cd->set_state_shutdown	= sibyte_shutdown;
+	cd->set_state_periodic	= sibyte_set_periodic;
+	cd->set_state_oneshot	= sibyte_shutdown;
 	clockevents_register_device(cd);
 
 	bcm1480_mask_irq(cpu, irq);
-- 
2.4.0