On Fri, May 8, 2015 at 5:59 AM, Jaedon Shin <jaedon.shin@xxxxxxxxx> wrote:
> Remove unsupported memory entry for the bcm7362 platform. The BMIPS4380
> processor only supports ZONE_NORMAL is not available for HIGHMEM.
>
> Signed-off-by: Jaedon Shin <jaedon.shin@xxxxxxxxx>
> ---
> arch/mips/boot/dts/brcm/bcm97362svmb.dts | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/arch/mips/boot/dts/brcm/bcm97362svmb.dts b/arch/mips/boot/dts/brcm/bcm97362svmb.dts
> index b7b88e5dc9e7..ab8b01fa7dcf 100644
> --- a/arch/mips/boot/dts/brcm/bcm97362svmb.dts
> +++ b/arch/mips/boot/dts/brcm/bcm97362svmb.dts
> @@ -8,7 +8,7 @@
>
> memory@0 {
> device_type = "memory";
> - reg = <0x00000000 0x10000000>, <0x20000000 0x30000000>;
> + reg = <0x00000000 0x10000000>;
Hmm, this is more of a kernel limitation than a hardware limitation,
though. The board physically has 1GB of memory, right? It is best if
the DT entry reflects the actual hardware configuration.
The Broadcom kernels enable the CPU's special "XKS01" feature to put
1GB of memory in ZONE_NORMAL:
https://github.com/Broadcom/stblinux-3.3/tree/master/linux
Maybe this would be worth adding to mainline.
