Loongson 1A's platform devices register.
Specially, Loongson 1A use ACPI to control restart/poweroff/halt.
Signed-off-by: Chunbo Cui <cuicb@xxxxxxxxxx>
Signed-off-by: Binbin Zhou <zhoubb@xxxxxxxxxx>
Signed-off-by: Huacai Chen <chenhc@xxxxxxxxxx>
---
arch/mips/include/asm/mach-loongson1/loongson1.h | 8 ++
arch/mips/loongson1/Makefile | 1 +
arch/mips/loongson1/common/reset.c | 6 ++
arch/mips/loongson1/common/setup.c | 38 +++++++-
arch/mips/loongson1/ls1a/Makefile | 5 ++
arch/mips/loongson1/ls1a/board.c | 105 +++++++++++++++++++++++
6 files changed, 162 insertions(+), 1 deletion(-)
create mode 100644 arch/mips/loongson1/ls1a/Makefile
create mode 100644 arch/mips/loongson1/ls1a/board.c
diff --git a/arch/mips/include/asm/mach-loongson1/loongson1.h b/arch/mips/include/asm/mach-loongson1/loongson1.h
index 912d702..c7689ad 100644
--- a/arch/mips/include/asm/mach-loongson1/loongson1.h
+++ b/arch/mips/include/asm/mach-loongson1/loongson1.h
@@ -157,6 +157,14 @@
#define LS1X_LPC_CFG2_REG (LS1X_LPC_REG_BASE + 0x8)
#define LS1X_LPC_CFG3_REG (LS1X_LPC_REG_BASE + 0xc)
+/* reg access */
+#define ls1x_readb(addr) (*(volatile u8 *)CKSEG1ADDR(addr))
+#define ls1x_readw(addr) (*(volatile u16 *)CKSEG1ADDR(addr))
+#define ls1x_readl(addr) (*(volatile u32 *)CKSEG1ADDR(addr))
+#define ls1x_writeb(val, addr) (*(volatile u8 *)CKSEG1ADDR(addr) = (val))
+#define ls1x_writew(val, addr) (*(volatile u16 *)CKSEG1ADDR(addr) = (val))
+#define ls1x_writel(val, addr) (*(volatile u32 *)CKSEG1ADDR(addr) = (val))
+
#include <regs-clk.h>
#include <regs-mux.h>
#include <regs-pwm.h>
diff --git a/arch/mips/loongson1/Makefile b/arch/mips/loongson1/Makefile
index 9719c75..b9f9bb3 100644
--- a/arch/mips/loongson1/Makefile
+++ b/arch/mips/loongson1/Makefile
@@ -8,4 +8,5 @@ obj-$(CONFIG_MACH_LOONGSON1) += common/
# Loongson LS1B board
#
+obj-$(CONFIG_LOONGSON1_LS1A) += ls1a/
obj-$(CONFIG_LOONGSON1_LS1B) += ls1b/
diff --git a/arch/mips/loongson1/common/reset.c b/arch/mips/loongson1/common/reset.c
index c41e4ca..71630fd 100644
--- a/arch/mips/loongson1/common/reset.c
+++ b/arch/mips/loongson1/common/reset.c
@@ -18,10 +18,14 @@ static void __iomem *wdt_base;
static void ls1x_halt(void)
{
+#ifdef CONFIG_CPU_LOONGSON1A
+ ls1x_writel(ls1x_readl(LS1X_PM1_CNT_REG) | 0x3d00, LS1X_PM1_CNT_REG);
+#else
while (1) {
if (cpu_wait)
cpu_wait();
}
+#endif
}
static void ls1x_restart(char *command)
@@ -30,7 +34,9 @@ static void ls1x_restart(char *command)
__raw_writel(0x1, wdt_base + WDT_TIMER);
__raw_writel(0x1, wdt_base + WDT_SET);
+#ifndef CONFIG_CPU_LOONGSON1A
ls1x_halt();
+#endif
}
static void ls1x_power_off(void)
diff --git a/arch/mips/loongson1/common/setup.c b/arch/mips/loongson1/common/setup.c
index c3d2036..87d21c9 100644
--- a/arch/mips/loongson1/common/setup.c
+++ b/arch/mips/loongson1/common/setup.c
@@ -8,12 +8,48 @@
*/
#include <asm/bootinfo.h>
-
+#include <linux/ioport.h>
+#include <linux/screen_info.h>
#include <prom.h>
+void (*__wbflush)(void);
+static void wbflush_ls1x(void)
+{
+ asm(".set\tpush\n\t"
+ ".set\tnoreorder\n\t"
+ ".set mips3\n\t"
+ "sync\n\t"
+ "nop\n\t"
+ ".set\tpop\n\t"
+ ".set mips0\n\t");
+}
+
void __init plat_mem_setup(void)
{
add_memory_region(0x0, (memsize << 20), BOOT_MEM_RAM);
+
+#ifdef CONFIG_CPU_LOONGSON1A
+ ioport_resource.start = 0;
+ ioport_resource.end = 0xffffffff;
+ iomem_resource.start = 0;
+ iomem_resource.end = 0xffffffff;
+
+ __wbflush = wbflush_ls1x;
+
+ set_io_port_base(0xbc000000);
+
+#if defined(CONFIG_VGA_CONSOLE)
+ screen_info = (struct screen_info) {
+ .orig_x = 0,
+ .orig_y = 25,
+ .orig_video_cols = 80,
+ .orig_video_lines = 25,
+ .orig_video_isVGA = VIDEO_TYPE_VGAC,
+ .orig_video_points = 16,
+ };
+#endif
+ add_memory_region(0x20000000, 0x30000000, BOOT_MEM_RESERVED);
+#endif
}
const char *get_system_type(void)
diff --git a/arch/mips/loongson1/ls1a/Makefile b/arch/mips/loongson1/ls1a/Makefile
new file mode 100644
index 0000000..7f2baf3
--- /dev/null
+++ b/arch/mips/loongson1/ls1a/Makefile
@@ -0,0 +1,5 @@
+#
+# Makefile for Loongson 1A based machines.
+#
+
+obj-y += board.o
diff --git a/arch/mips/loongson1/ls1a/board.c b/arch/mips/loongson1/ls1a/board.c
new file mode 100644
index 0000000..98fb86c
--- /dev/null
+++ b/arch/mips/loongson1/ls1a/board.c
@@ -0,0 +1,105 @@
+/*
+ * Platform device support for GS232 SoCs.
+ *
+ * Copyright 2009, Su Wen <suwen@xxxxxxxxx>
+ *
+ * base on Au1xxx Socs drivers by Matt Porter <mporter@xxxxxxxxxxxxxxxxxxx>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/delay.h>
+#include <linux/i2c.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/flash.h>
+
+#include <irq.h>
+#include <platform.h>
+#include <loongson1.h>
+
+static struct platform_device *ls1a_platform_devices[] __initdata = {
+ &ls1x_nand_pdev,
+ &ls1x_uart_pdev,
+ &ls1x_ahci_pdev,
+ &ls1x_ohci_pdev,
+ &ls1x_ehci_pdev,
+ &ls1x_eth0_pdev,
+ &ls1x_eth1_pdev,
+ &ls1x_wat_pdev,
+ &ls1x_rtc_pdev,
+ &ls1x_audio_pdev,
+ &ls1x_fb_pdev,
+ &ls1x_i2c0_pdev,
+ &ls1x_i2c1_pdev,
+ &ls1x_i2c2_pdev,
+ &ls1x_spi0_pdev,
+ &ls1x_spi1_pdev,
+};
+
+struct i2c_board_info ls1a_pcf8563 __initdata = {
+ I2C_BOARD_INFO("pcf8563", 0x51),
+};
+
+struct flash_platform_data ls1a_spiflash_data = {
+ .name = "m25p80",
+ .parts = NULL,
+ .nr_parts = 0,
+ .type = "m25p80",
+};
+
+struct spi_board_info ls1a_spi_info[] __initdata = {
+ {
+ .modalias = "m25p80",
+ .max_speed_hz = 1000000,
+ .bus_num = 0,
+ .chip_select = 1,
+ .platform_data = &ls1a_spiflash_data,
+ },
+};
+
+void ls1a_route_setting(void)
+{
+ /*set gpio 48-61 as normal pin*/
+ ls1x_writel(ls1x_readl(LS1X_GPIO_CFG1_REG) & 0xc000ffff,
+ LS1X_GPIO_CFG1_REG);
+
+ /*set gpio mux : gmac1 to use uart0, uart1 pins*/
+ ls1x_writel((ls1x_readl(LS1X_MUX_BASE) & 0x00fff5ff) | 0x0a0000c0,
+ LS1X_GPIO_CFG1_REG);
+
+ /*multiplex int0 as gpio0 */
+ ls1x_writel(ls1x_readl(LS1X_GPIO_CFG0_REG) | 0x00000001,
+ LS1X_GPIO_CFG0_REG);
+ ls1x_writel(ls1x_readl(LS1X_GPIO_OE0_REG) | 0x00000001,
+ LS1X_GPIO_OE0_REG);
+ ls1x_writel(ls1x_readl(LS1X_GPIO_IN0_REG) & 0xfffffffe,
+ LS1X_GPIO_IN0_REG);
+
+ /*i2c gpio configuartion gpio64 scl and gpio65 sda*/
+ ls1x_writel(ls1x_readl(LS1X_GPIO_CFG2_REG) & 0xfffffffd,
+ LS1X_GPIO_CFG2_REG);
+
+ mdelay(1);
+
+ /*ls1a usb reset stop*/
+ ls1x_writel(0x40000000, LS1X_LPC_CFG1_REG);
+
+ /* Reset GMAC0/1 to avoid DMA error */
+ ls1x_writel(ls1x_readl(LS1X_GMAC0_DMA_REG) | 1, LS1X_GMAC0_DMA_REG);
+ ls1x_writel(ls1x_readl(LS1X_GMAC1_DMA_REG) | 1, LS1X_GMAC1_DMA_REG);
+}
+
+int __init ls1a_platform_init(void)
+{
+ ls1a_route_setting();
+
+ i2c_register_board_info(1, &ls1a_pcf8563, 1);
+ spi_register_board_info(ls1a_spi_info, ARRAY_SIZE(ls1a_spi_info));
+
+ return platform_add_devices(ls1a_platform_devices,
+ ARRAY_SIZE(ls1a_platform_devices));
+}
+
+arch_initcall(ls1a_platform_init);
--
1.9.0
