These bindings support the GPIO controllers found on the Qualcomm
Atheros AR7xxx/AR9XXX SoC.
Signed-off-by: Alban Bedel <albeu@xxxxxxx>
---
v2: * Add the ngpios property to have fewer fallbacks and simpler code
---
.../devicetree/bindings/gpio/gpio-ath79.txt | 38 ++++++++++++++++++++++
1 file changed, 38 insertions(+)
create mode 100644 Documentation/devicetree/bindings/gpio/gpio-ath79.txt
diff --git a/Documentation/devicetree/bindings/gpio/gpio-ath79.txt b/Documentation/devicetree/bindings/gpio/gpio-ath79.txt
new file mode 100644
index 0000000..e027864
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/gpio-ath79.txt
@@ -0,0 +1,38 @@
+Binding for Qualcomm Atheros AR7xxx/AR9xxx GPIO controller
+
+Required properties:
+- compatible: has to be "qca,<soctype>-gpio" and one of the following
+ fallback:
+ - "qca,ar7100-gpio"
+ - "qca,ar9340-gpio"
+- reg: Base address and size of the controllers memory area
+- gpio-controller : Marks the device node as a GPIO controller.
+- #gpio-cells : Should be two. The first cell is the pin number and the
+ second cell is used to specify optional parameters.
+- ngpios: Should be set to the number of GPIOs available on the SoC.
+
+Optional properties:
+- interrupt-parent: phandle of the parent interrupt controller.
+- interrupts: Interrupt specifier for the controllers interrupt.
+- interrupt-controller : Identifies the node as an interrupt controller
+- #interrupt-cells : Specifies the number of cells needed to encode interrupt
+ source, should be 2
+
+Please refer to interrupts.txt in this directory for details of the common
+Interrupt Controllers bindings used by client devices.
+
+Example:
+
+ gpio@18040000 {
+ compatible = "qca,ar9132-gpio", "qca,ar9130-gpio";
+ reg = <0x18040000 0x30>;
+ interrupts = <2>;
+
+ ngpios = <22>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
--
2.0.0
