Add the bare minimum to load a device tree.
Signed-off-by: Alban Bedel <albeu@xxxxxxx>
---
arch/mips/Kconfig | 1 +
arch/mips/ath79/Kconfig | 10 ++++++++++
arch/mips/ath79/machtypes.h | 1 +
arch/mips/ath79/setup.c | 27 ++++++++++++++++++++++++++-
4 files changed, 38 insertions(+), 1 deletion(-)
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index 874bbaf..772312d 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -133,6 +133,7 @@ config ATH79
select SYS_SUPPORTS_BIG_ENDIAN
select SYS_SUPPORTS_MIPS16
select SYS_SUPPORTS_ZBOOT
+ select USE_OF
help
Support for the Atheros AR71XX/AR724X/AR913X SoCs.
diff --git a/arch/mips/ath79/Kconfig b/arch/mips/ath79/Kconfig
index dfc6020..1d38c6a 100644
--- a/arch/mips/ath79/Kconfig
+++ b/arch/mips/ath79/Kconfig
@@ -71,6 +71,16 @@ config ATH79_MACH_UBNT_XM
Say 'Y' here if you want your kernel to support the
Ubiquiti Networks XM (rev 1.0) board.
+choice
+ prompt "Builtin devicetree selection"
+ default DTB_ATH79_NONE
+ help
+ Select the devicetree.
+
+ config DTB_ATH79_NONE
+ bool "None"
+endchoice
+
endmenu
config SOC_AR71XX
diff --git a/arch/mips/ath79/machtypes.h b/arch/mips/ath79/machtypes.h
index 2625405..a13db3d 100644
--- a/arch/mips/ath79/machtypes.h
+++ b/arch/mips/ath79/machtypes.h
@@ -15,6 +15,7 @@
#include <asm/mips_machine.h>
enum ath79_mach_type {
+ ATH79_MACH_GENERIC_OF = -1, /* Device tree board */
ATH79_MACH_GENERIC = 0,
ATH79_MACH_AP121, /* Atheros AP121 reference board */
ATH79_MACH_AP136_010, /* Atheros AP136-010 reference board */
diff --git a/arch/mips/ath79/setup.c b/arch/mips/ath79/setup.c
index 74f1af7..01a644f 100644
--- a/arch/mips/ath79/setup.c
+++ b/arch/mips/ath79/setup.c
@@ -17,12 +17,16 @@
#include <linux/bootmem.h>
#include <linux/err.h>
#include <linux/clk.h>
+#include <linux/of_platform.h>
+#include <linux/of_fdt.h>
#include <asm/bootinfo.h>
#include <asm/idle.h>
#include <asm/time.h> /* for mips_hpt_frequency */
#include <asm/reboot.h> /* for _machine_{restart,halt} */
#include <asm/mips_machine.h>
+#include <asm/prom.h>
+#include <asm/fw/fw.h>
#include <asm/mach-ath79/ath79.h>
#include <asm/mach-ath79/ar71xx_regs.h>
@@ -194,8 +198,19 @@ unsigned int get_c0_compare_int(void)
void __init plat_mem_setup(void)
{
+ unsigned long fdt_start;
+
set_io_port_base(KSEG1);
+ /* Get the position of the FDT passed by the bootloader */
+ fdt_start = fw_getenvl("fdt_start");
+ if (fdt_start)
+ __dt_setup_arch((void *)KSEG0ADDR(fdt_start));
+#ifdef CONFIG_BUILTIN_DTB
+ else
+ __dt_setup_arch(__dtb_start);
+#endif
+
ath79_reset_base = ioremap_nocache(AR71XX_RESET_BASE,
AR71XX_RESET_SIZE);
ath79_pll_base = ioremap_nocache(AR71XX_PLL_BASE,
@@ -203,7 +218,8 @@ void __init plat_mem_setup(void)
ath79_ddr_ctrl_init();
ath79_detect_sys_type();
- detect_memory_region(0, ATH79_MEM_SIZE_MIN, ATH79_MEM_SIZE_MAX);
+ if (mips_machtype != ATH79_MACH_GENERIC_OF)
+ detect_memory_region(0, ATH79_MEM_SIZE_MIN, ATH79_MEM_SIZE_MAX);
_machine_restart = ath79_restart;
_machine_halt = ath79_halt;
@@ -235,6 +251,10 @@ void __init plat_time_init(void)
static int __init ath79_setup(void)
{
+ of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
+ if (mips_machtype == ATH79_MACH_GENERIC_OF)
+ return 0;
+
ath79_gpio_init();
ath79_register_uart();
ath79_register_wdt();
@@ -246,6 +266,11 @@ static int __init ath79_setup(void)
arch_initcall(ath79_setup);
+void __init device_tree_init(void)
+{
+ unflatten_and_copy_device_tree();
+}
+
static void __init ath79_generic_init(void)
{
/* Nothing to do */
--
2.0.0
