[PATCH net-next v2 10/17] net: fcoe: use __ethtool_get_ksettings

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: David Decotigny <decot@xxxxxxxxxxxx>

Signed-off-by: David Decotigny <decot@xxxxxxxxxxxx>
---
 drivers/scsi/fcoe/fcoe_transport.c | 36 ++++++++++++++++++++----------------
 1 file changed, 20 insertions(+), 16 deletions(-)

diff --git a/drivers/scsi/fcoe/fcoe_transport.c b/drivers/scsi/fcoe/fcoe_transport.c
index bdc8989..6097f0d 100644
--- a/drivers/scsi/fcoe/fcoe_transport.c
+++ b/drivers/scsi/fcoe/fcoe_transport.c
@@ -93,36 +93,40 @@ static struct notifier_block libfcoe_notifier = {
 int fcoe_link_speed_update(struct fc_lport *lport)
 {
 	struct net_device *netdev = fcoe_get_netdev(lport);
-	struct ethtool_cmd ecmd;
+	struct ethtool_ksettings ecmd;
 
-	if (!__ethtool_get_settings(netdev, &ecmd)) {
+	if (!__ethtool_get_ksettings(netdev, &ecmd)) {
 		lport->link_supported_speeds &= ~(FC_PORTSPEED_1GBIT  |
 		                                  FC_PORTSPEED_10GBIT |
 		                                  FC_PORTSPEED_20GBIT |
 		                                  FC_PORTSPEED_40GBIT);
 
-		if (ecmd.supported & (SUPPORTED_1000baseT_Half |
-		                      SUPPORTED_1000baseT_Full |
-		                      SUPPORTED_1000baseKX_Full))
+		if (ecmd.link_modes.supported.mask[0] & (
+			    SUPPORTED_1000baseT_Half |
+			    SUPPORTED_1000baseT_Full |
+			    SUPPORTED_1000baseKX_Full))
 			lport->link_supported_speeds |= FC_PORTSPEED_1GBIT;
 
-		if (ecmd.supported & (SUPPORTED_10000baseT_Full   |
-		                      SUPPORTED_10000baseKX4_Full |
-		                      SUPPORTED_10000baseKR_Full  |
-		                      SUPPORTED_10000baseR_FEC))
+		if (ecmd.link_modes.supported.mask[0] & (
+			    SUPPORTED_10000baseT_Full   |
+			    SUPPORTED_10000baseKX4_Full |
+			    SUPPORTED_10000baseKR_Full  |
+			    SUPPORTED_10000baseR_FEC))
 			lport->link_supported_speeds |= FC_PORTSPEED_10GBIT;
 
-		if (ecmd.supported & (SUPPORTED_20000baseMLD2_Full |
-		                      SUPPORTED_20000baseKR2_Full))
+		if (ecmd.link_modes.supported.mask[0] & (
+			    SUPPORTED_20000baseMLD2_Full |
+			    SUPPORTED_20000baseKR2_Full))
 			lport->link_supported_speeds |= FC_PORTSPEED_20GBIT;
 
-		if (ecmd.supported & (SUPPORTED_40000baseKR4_Full |
-		                      SUPPORTED_40000baseCR4_Full |
-		                      SUPPORTED_40000baseSR4_Full |
-		                      SUPPORTED_40000baseLR4_Full))
+		if (ecmd.link_modes.supported.mask[0] & (
+			    SUPPORTED_40000baseKR4_Full |
+			    SUPPORTED_40000baseCR4_Full |
+			    SUPPORTED_40000baseSR4_Full |
+			    SUPPORTED_40000baseLR4_Full))
 			lport->link_supported_speeds |= FC_PORTSPEED_40GBIT;
 
-		switch (ethtool_cmd_speed(&ecmd)) {
+		switch (ecmd.parent.speed) {
 		case SPEED_1000:
 			lport->link_speed = FC_PORTSPEED_1GBIT;
 			break;
-- 
2.2.0.rc0.207.ga3a616c






[Index of Archives]     [Linux MIPS Home]     [LKML Archive]     [Linux ARM Kernel]     [Linux ARM]     [Linux]     [Git]     [Yosemite News]     [Linux SCSI]     [Linux Hams]

  Powered by Linux