Hello.
On 02/04/2015 06:21 PM, Zubair Lutfullah Kakakhel wrote:
From: Paul Burton <paul.burton@xxxxxxxxxx>
Add binding documentation for the Ingenic jz4740 interrupt controller.
Signed-off-by: Paul Burton <paul.burton@xxxxxxxxxx>
Cc: Lars-Peter Clausen <lars@xxxxxxxxxx>
Cc: devicetree@xxxxxxxxxxxxxxx
---
.../interrupt-controller/ingenic,jz4740-intc.txt | 26 ++++++++++++++++++++++
1 file changed, 26 insertions(+)
create mode 100644 Documentation/devicetree/bindings/interrupt-controller/ingenic,jz4740-intc.txt
diff --git a/Documentation/devicetree/bindings/interrupt-controller/ingenic,jz4740-intc.txt b/Documentation/devicetree/bindings/interrupt-controller/ingenic,jz4740-intc.txt
new file mode 100644
index 0000000..5e7f4bb
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/ingenic,jz4740-intc.txt
@@ -0,0 +1,26 @@
+Ingenic jz4740 SoC Interrupt Controller
JZ4740?
+
+Required properties:
+
+- compatible : should be "ingenic,jz4740-intc" or "ingenic,jz4780-intc"
+- reg : Specifies base physical address and size of the registers.
+- interrupt-controller : Identifies the node as an interrupt controller
+- #interrupt-cells : Specifies the number of cells needed to encode an
+ interrupt source. The value shall be 1.
+- interrupts - Specifies the CPU interrupt the controller is connected to.
+
+Optional properties:
+- interrupt-parent: phandle of the CPU interrupt controller.
+
+Example:
+
+intc: intc@10001000 {
Name it "interrupt-controller@10001000", please.
+ compatible = "ingenic,jz4740-intc";
+ reg = <0x10001000 0x14>;
+
+ interrupt-controller;
+ #interrupt-cells = <1>;
+
+ interrupt-parent = <&cpuintc>;
+ interrupts = <2>;
+};
WBR, Sergei
