On Wed, Feb 04, 2015 at 03:21:29PM +0000, Zubair Lutfullah Kakakhel wrote:
> Hi,
>
> This series introduces initial support for the Ingenic jz4780 SoC & the
> MIPS Creator CI20 board which is based upon it.
>
> The jz4780 shares aspects with jz4740. But jz4740 is platform only.
>
> So, the jz4740 & qi_lb60 (Ben NanoNote) are converted to use DT
> for some things in order to ease the process of sharing code.
>
> Series is based on 3.19-rc7.
>
> ACKS from various subsystems are welcome so that the series can
> go via mips if that is OK with everyone.
>
> Alternative suggestions welcome.
>
> Changes in V2
> - Removed FSF addresses.
> - Removed 2 patches for binding docs that
> were consolidated in the same binding for jz4740.
> - Bug fix in error handling in cgu
> - Rebase on 3.19-rc7
> - Updated defconfig with jz47xx serial and removed initramfs
> - Renames in binding from intc to interrupt-controller
> - Fix in jz47xx serial for build error on x86 in one config option
> - Removed interupt-parent bindings from required bindings
> - Fixed imgtec prefix to img
> - Added jz47xx config for qi_lb60_defconfig
>
> Regards,
> ZubairLK
Hi Zubair,
So first of all, thanks. I've been rather busy & haven't had time to
revise this patchset myself yet so I appreciate your effort.
Having said that, I do find it at best rather rude to take someone elses
patches, modify them & submit them without first:
- Asking the author if that's ok.
- Allowing the author to look over the changes you've made to their
patches.
- Making it clear in the commit message for each patch which
modifications you have made.
As is I now have to go and retroactively check each patch against mine
to find out what's different, since you didn't indicate that in each
patch, and then hope I agree with the changes that you made but which
the patches indicate I authored.
So please, if you should see fit to modify any of my patches in the
future, do the above things first.
Thanks,
Paul
> Paul Burton (34):
> dt: Add Ingenic Semiconductor vendor prefix
> MIPS: jz4740: require & include DT
> MIPS: irq_cpu: declare irqchip table entry
> MIPS: jz4740: probe CPU interrupt controller via DT
> MIPS: jz4740: use generic plat_irq_dispatch
> MIPS: jz4740: move arch_init_irq out of arch/mips/jz4740/irq.c
> dt: interrupt-controller: Add ingenic,jz4740-intc binding doc
> MIPS: jz4740: allow interrupt controller probe via DT
> MIPS: jz4740: probe interrupt controller via DT
> MIPS: jz4740: remove non-DT interrupt controller init
> MIPS: jz4740: register an irq_domain for the interrupt controller
> MIPS: jz4740: call jz4740_clock_init earlier
> MIPS: jz4740: replace use of jz4740_clock_bdata
> clk: jz47xx-cgu: add driver for Ingenic jz47xx series CGU clocks
> dt: clk: Add ingenic,jz4740-cgu binding documentation
> MIPS: clk: migrate jz4740 to common clock framework
> MIPS: clk: move jz4740_clock_set_wait_mode to jz4740-cgu
> MIPS: clk: move jz4740 UDC auto suspend functions to jz4740-cgu
> MIPS: clk: move jz4740 clock suspend, resume functions to jz4740-cgu
> MIPS: jz4740: remove clock.h
> MIPS: jz4740: only detect RAM size if not specified in DT
> MIPS: jz4740: support >32 interrupts
> MIPS: jz4740: define IRQ numbers based on number of intc IRQs
> dt: serial: Add ingenic,jz4740-uart binding
> serial: 8250_jz47xx: support for Ingenic jz47xx UARTs
> MIPS: allow mach-provided serial.h
> MIPS: jz4740: use jz47xx-uart & DT for UART output
> dt: clk: Add ingenic,jz4780-cgu binding documentation
> clk: add Ingenic jz4780 CGU driver
> MIPS: jz4740: add jz4780 interrupt controller support
> MIPS: add jz4780 Ingenic vendor ID
> MIPS: initial Ingenic jz4780 support
> MIPS: initial MIPS Creator CI20 board support
> MIPS: allow jz4780 to be selected in Kconfig
>
> .../bindings/clock/ingenic,jz4740-cgu.txt | 52 ++
> .../bindings/clock/ingenic,jz4780-cgu.txt | 52 ++
> .../interrupt-controller/ingenic,jz4740-intc.txt | 26 +
> .../bindings/serial/ingenic,jz4740-uart.txt | 22 +
> .../devicetree/bindings/vendor-prefixes.txt | 1 +
> arch/mips/Kconfig | 22 +-
> arch/mips/boot/dts/Makefile | 2 +
> arch/mips/boot/dts/ci20.dts | 21 +
> arch/mips/boot/dts/jz4740.dtsi | 68 ++
> arch/mips/boot/dts/jz4780.dtsi | 101 +++
> arch/mips/boot/dts/qi_lb60.dts | 15 +
> arch/mips/configs/ci20_defconfig | 127 +++
> arch/mips/configs/qi_lb60_defconfig | 1 +
> arch/mips/include/asm/Kbuild | 1 -
> arch/mips/include/asm/cpu.h | 1 +
> arch/mips/include/asm/mach-generic/serial.h | 21 +
> arch/mips/include/asm/mach-jz4740/clock.h | 3 +
> arch/mips/include/asm/mach-jz4740/irq.h | 15 +-
> arch/mips/include/asm/mach-jz4740/platform.h | 2 -
> arch/mips/include/asm/mach-jz4740/serial.h | 27 +
> arch/mips/include/asm/serial.h | 21 +
> arch/mips/jz4740/Kconfig | 10 +
> arch/mips/jz4740/Makefile | 6 +-
> arch/mips/jz4740/Platform | 4 +
> arch/mips/jz4740/board-qi_lb60.c | 7 -
> arch/mips/jz4740/clock-debugfs.c | 108 ---
> arch/mips/jz4740/clock.c | 924 ---------------------
> arch/mips/jz4740/clock.h | 76 --
> arch/mips/jz4740/irq.c | 103 ++-
> arch/mips/jz4740/platform.c | 37 +-
> arch/mips/jz4740/pm.c | 2 -
> arch/mips/jz4740/prom.c | 13 -
> arch/mips/jz4740/reset.c | 13 +-
> arch/mips/jz4740/serial.c | 33 -
> arch/mips/jz4740/serial.h | 23 -
> arch/mips/jz4740/setup.c | 33 +-
> arch/mips/jz4740/time.c | 19 +-
> arch/mips/kernel/cpu-probe.c | 1 +
> arch/mips/kernel/irq_cpu.c | 3 +
> drivers/clk/Makefile | 2 +
> drivers/clk/jz47xx/Makefile | 3 +
> drivers/clk/jz47xx/jz4740-cgu.c | 295 +++++++
> drivers/clk/jz47xx/jz4780-cgu.c | 742 +++++++++++++++++
> drivers/clk/jz47xx/jz47xx-cgu.c | 723 ++++++++++++++++
> drivers/clk/jz47xx/jz47xx-cgu.h | 205 +++++
> drivers/tty/serial/8250/8250_jz47xx.c | 225 +++++
> drivers/tty/serial/8250/Kconfig | 9 +
> drivers/tty/serial/8250/Makefile | 1 +
> include/dt-bindings/clock/jz4740-cgu.h | 37 +
> include/dt-bindings/clock/jz4780-cgu.h | 88 ++
> 50 files changed, 3070 insertions(+), 1276 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/clock/ingenic,jz4740-cgu.txt
> create mode 100644 Documentation/devicetree/bindings/clock/ingenic,jz4780-cgu.txt
> create mode 100644 Documentation/devicetree/bindings/interrupt-controller/ingenic,jz4740-intc.txt
> create mode 100644 Documentation/devicetree/bindings/serial/ingenic,jz4740-uart.txt
> create mode 100644 arch/mips/boot/dts/ci20.dts
> create mode 100644 arch/mips/boot/dts/jz4740.dtsi
> create mode 100644 arch/mips/boot/dts/jz4780.dtsi
> create mode 100644 arch/mips/boot/dts/qi_lb60.dts
> create mode 100644 arch/mips/configs/ci20_defconfig
> create mode 100644 arch/mips/include/asm/mach-generic/serial.h
> create mode 100644 arch/mips/include/asm/mach-jz4740/serial.h
> create mode 100644 arch/mips/include/asm/serial.h
> delete mode 100644 arch/mips/jz4740/clock-debugfs.c
> delete mode 100644 arch/mips/jz4740/clock.c
> delete mode 100644 arch/mips/jz4740/clock.h
> delete mode 100644 arch/mips/jz4740/serial.c
> delete mode 100644 arch/mips/jz4740/serial.h
> create mode 100644 drivers/clk/jz47xx/Makefile
> create mode 100644 drivers/clk/jz47xx/jz4740-cgu.c
> create mode 100644 drivers/clk/jz47xx/jz4780-cgu.c
> create mode 100644 drivers/clk/jz47xx/jz47xx-cgu.c
> create mode 100644 drivers/clk/jz47xx/jz47xx-cgu.h
> create mode 100644 drivers/tty/serial/8250/8250_jz47xx.c
> create mode 100644 include/dt-bindings/clock/jz4740-cgu.h
> create mode 100644 include/dt-bindings/clock/jz4780-cgu.h
>
> --
> 1.9.1
>
