On Mon, Feb 02, 2015 at 04:28:44PM +0000, Zubair Lutfullah Kakakhel wrote: > Hi Greg, > > On 30/01/15 23:31, Greg Kroah-Hartman wrote: > > On Sun, Jan 18, 2015 at 02:41:21PM -0800, Paul Burton wrote: > >> Introduce a driver suitable for use with the UARTs present in > >> Ingenic jz47xx series SoCs. These are described as being ns16550 > >> compatible but aren't quite - they require the setting of an extra bit > >> in the FCR register to enable the UART module. The serial_out > >> implementation is the same as that in arch/mips/jz4740/serial.c - which > >> will shortly be removed. > >> > >> Signed-off-by: Paul Burton <paul.burton@xxxxxxxxxx> > >> Cc: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx> > >> Cc: Lars-Peter Clausen <lars@xxxxxxxxxx> > >> Cc: linux-serial@xxxxxxxxxxxxxxx > >> --- > >> drivers/tty/serial/8250/8250_jz47xx.c | 228 ++++++++++++++++++++++++++++++++++ > >> drivers/tty/serial/8250/Kconfig | 8 ++ > >> drivers/tty/serial/8250/Makefile | 1 + > >> 3 files changed, 237 insertions(+) > >> create mode 100644 drivers/tty/serial/8250/8250_jz47xx.c > > > > This patch blows up on x86 systems, breaking the build :( > > Ouch. > > Did you compile after all the patches applied? Or after every single patch. After every individual patch, like is required :) > I can't manage to reproduce the build error with all of them applied. Try it with just this one patch applied. thanks, greg k-h
