Allow a devicetree to specify the memory present in the system rather
than probing it from the memory controller. This both saves the probing
for systems where the amount of memory is fixed, and will simplify the
bringup of later jz47xx series SoCs where the memory controller register
layout differs.
Signed-off-by: Paul Burton <paul.burton@xxxxxxxxxx>
Cc: Lars-Peter Clausen <lars@xxxxxxxxxx>
---
arch/mips/Kconfig | 1 +
arch/mips/jz4740/Makefile | 2 ++
arch/mips/jz4740/setup.c | 8 +++++++-
3 files changed, 10 insertions(+), 1 deletion(-)
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index 8b377a7..ef82cd3 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -290,6 +290,7 @@ config MACH_JZ4740
select GENERIC_IRQ_CHIP
select BUILTIN_DTB
select USE_OF
+ select LIBFDT
config LANTIQ
bool "Lantiq based platforms"
diff --git a/arch/mips/jz4740/Makefile b/arch/mips/jz4740/Makefile
index 61168a2..340dc16 100644
--- a/arch/mips/jz4740/Makefile
+++ b/arch/mips/jz4740/Makefile
@@ -7,6 +7,8 @@
obj-y += prom.o irq.o time.o reset.o setup.o \
gpio.o platform.o timer.o serial.o
+CFLAGS_setup.o = -I$(src)/../../../scripts/dtc/libfdt
+
# board specific support
obj-$(CONFIG_JZ4740_QI_LB60) += board-qi_lb60.o
diff --git a/arch/mips/jz4740/setup.c b/arch/mips/jz4740/setup.c
index 8c08d7d..1bed3cb 100644
--- a/arch/mips/jz4740/setup.c
+++ b/arch/mips/jz4740/setup.c
@@ -18,6 +18,7 @@
#include <linux/io.h>
#include <linux/irqchip.h>
#include <linux/kernel.h>
+#include <linux/libfdt.h>
#include <linux/of_fdt.h>
#include <linux/of_platform.h>
@@ -55,9 +56,14 @@ static void __init jz4740_detect_mem(void)
void __init plat_mem_setup(void)
{
+ int offset;
+
jz4740_reset_init();
- jz4740_detect_mem();
__dt_setup_arch(__dtb_start);
+
+ offset = fdt_path_offset(__dtb_start, "/memory");
+ if (offset < 0)
+ jz4740_detect_mem();
}
void __init device_tree_init(void)
--
2.2.1
