Most of the supported chips use legacy (non-DT) bootloaders, so they will
need to select an appropriate builtin DTB at compile time until the
bootloader is updated. Provide suitable DTS files, and a means to compile
one of them into the kernel image.
Signed-off-by: Kevin Cernekee <cernekee@xxxxxxxxx>
---
arch/mips/Kconfig | 1 +
arch/mips/bmips/Kconfig | 50 +++++++
arch/mips/boot/dts/Makefile | 9 ++
arch/mips/boot/dts/bcm3384_viper.dtsi | 108 +++++++++++++++
arch/mips/boot/dts/bcm3384_zephyr.dtsi | 126 +++++++++++++++++
arch/mips/boot/dts/bcm6328.dtsi | 86 ++++++++++++
arch/mips/boot/dts/bcm6368.dtsi | 93 +++++++++++++
arch/mips/boot/dts/bcm7125.dtsi | 139 +++++++++++++++++++
arch/mips/boot/dts/bcm7346.dtsi | 224 ++++++++++++++++++++++++++++++
arch/mips/boot/dts/bcm7360.dtsi | 161 ++++++++++++++++++++++
arch/mips/boot/dts/bcm7420.dtsi | 184 +++++++++++++++++++++++++
arch/mips/boot/dts/bcm7425.dtsi | 225 +++++++++++++++++++++++++++++++
arch/mips/boot/dts/bcm93384wvg.dts | 25 ++++
arch/mips/boot/dts/bcm93384wvg_viper.dts | 25 ++++
arch/mips/boot/dts/bcm96368mvwg.dts | 31 +++++
arch/mips/boot/dts/bcm97125cbmb.dts | 31 +++++
arch/mips/boot/dts/bcm97346dbsmb.dts | 58 ++++++++
arch/mips/boot/dts/bcm97360svmb.dts | 34 +++++
arch/mips/boot/dts/bcm97420c.dts | 45 +++++++
arch/mips/boot/dts/bcm97425svmb.dts | 60 +++++++++
arch/mips/boot/dts/bcm9ejtagprb.dts | 22 +++
21 files changed, 1737 insertions(+)
create mode 100644 arch/mips/bmips/Kconfig
create mode 100644 arch/mips/boot/dts/bcm3384_viper.dtsi
create mode 100644 arch/mips/boot/dts/bcm3384_zephyr.dtsi
create mode 100644 arch/mips/boot/dts/bcm6328.dtsi
create mode 100644 arch/mips/boot/dts/bcm6368.dtsi
create mode 100644 arch/mips/boot/dts/bcm7125.dtsi
create mode 100644 arch/mips/boot/dts/bcm7346.dtsi
create mode 100644 arch/mips/boot/dts/bcm7360.dtsi
create mode 100644 arch/mips/boot/dts/bcm7420.dtsi
create mode 100644 arch/mips/boot/dts/bcm7425.dtsi
create mode 100644 arch/mips/boot/dts/bcm93384wvg.dts
create mode 100644 arch/mips/boot/dts/bcm93384wvg_viper.dts
create mode 100644 arch/mips/boot/dts/bcm96368mvwg.dts
create mode 100644 arch/mips/boot/dts/bcm97125cbmb.dts
create mode 100644 arch/mips/boot/dts/bcm97346dbsmb.dts
create mode 100644 arch/mips/boot/dts/bcm97360svmb.dts
create mode 100644 arch/mips/boot/dts/bcm97420c.dts
create mode 100644 arch/mips/boot/dts/bcm97425svmb.dts
create mode 100644 arch/mips/boot/dts/bcm9ejtagprb.dts
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index b10d5aaa6eb2..9260ca6dc73c 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -892,6 +892,7 @@ source "arch/mips/ath25/Kconfig"
source "arch/mips/ath79/Kconfig"
source "arch/mips/bcm47xx/Kconfig"
source "arch/mips/bcm63xx/Kconfig"
+source "arch/mips/bmips/Kconfig"
source "arch/mips/jazz/Kconfig"
source "arch/mips/jz4740/Kconfig"
source "arch/mips/lantiq/Kconfig"
diff --git a/arch/mips/bmips/Kconfig b/arch/mips/bmips/Kconfig
new file mode 100644
index 000000000000..dced2cdc3d85
--- /dev/null
+++ b/arch/mips/bmips/Kconfig
@@ -0,0 +1,50 @@
+choice
+ prompt "Built-in device tree"
+ help
+ Legacy bootloaders do not pass a DTB pointer to the kernel, so
+ if a "wrapper" is not being used, the kernel will need to include
+ a device tree that matches the target board.
+
+ The builtin DTB will only be used if the firmware does not supply
+ a valid DTB.
+
+config DT_NONE
+ bool "None"
+
+config DT_BCM93384WVG
+ bool "BCM93384WVG Zephyr CPU"
+ select BUILTIN_DTB
+
+config DT_BCM93384WVG_VIPER
+ bool "BCM93384WVG Viper CPU (EXPERIMENTAL)"
+ select BUILTIN_DTB
+
+config DT_BCM96368MVWG
+ bool "BCM96368MVWG"
+ select BUILTIN_DTB
+
+config DT_BCM9EJTAGPRB
+ bool "BCM9EJTAGPRB"
+ select BUILTIN_DTB
+
+config DT_BCM97125CBMB
+ bool "BCM97125CBMB"
+ select BUILTIN_DTB
+
+config DT_BCM97346DBSMB
+ bool "BCM97346DBSMB"
+ select BUILTIN_DTB
+
+config DT_BCM97360SVMB
+ bool "BCM97360SVMB"
+ select BUILTIN_DTB
+
+config DT_BCM97420C
+ bool "BCM97420C"
+ select BUILTIN_DTB
+
+config DT_BCM97425SVMB
+ bool "BCM97425SVMB"
+ select BUILTIN_DTB
+
+endchoice
diff --git a/arch/mips/boot/dts/Makefile b/arch/mips/boot/dts/Makefile
index ca9c90e2cabf..153d04489c46 100644
--- a/arch/mips/boot/dts/Makefile
+++ b/arch/mips/boot/dts/Makefile
@@ -1,4 +1,13 @@
dtb-$(CONFIG_CAVIUM_OCTEON_SOC) += octeon_3xxx.dtb octeon_68xx.dtb
+dtb-$(CONFIG_DT_BCM93384WVG) += bcm93384wvg.dtb
+dtb-$(CONFIG_DT_BCM93384WVG_VIPER) += bcm93384wvg_viper.dtb
+dtb-$(CONFIG_DT_BCM96368MVWG) += bcm96368mvwg.dtb
+dtb-$(CONFIG_DT_BCM9EJTAGPRB) += bcm9ejtagprb.dtb
+dtb-$(CONFIG_DT_BCM97125CBMB) += bcm97125cbmb.dtb
+dtb-$(CONFIG_DT_BCM97346DBSMB) += bcm97346dbsmb.dtb
+dtb-$(CONFIG_DT_BCM97360SVMB) += bcm97360svmb.dtb
+dtb-$(CONFIG_DT_BCM97420C) += bcm97420c.dtb
+dtb-$(CONFIG_DT_BCM97425SVMB) += bcm97425svmb.dtb
dtb-$(CONFIG_DT_EASY50712) += easy50712.dtb
dtb-$(CONFIG_DT_XLP_EVP) += xlp_evp.dtb
dtb-$(CONFIG_DT_XLP_SVP) += xlp_svp.dtb
diff --git a/arch/mips/boot/dts/bcm3384_viper.dtsi b/arch/mips/boot/dts/bcm3384_viper.dtsi
new file mode 100644
index 000000000000..aa406b43c65f
--- /dev/null
+++ b/arch/mips/boot/dts/bcm3384_viper.dtsi
@@ -0,0 +1,108 @@
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "brcm,bcm3384-viper", "brcm,bcm33843-viper";
+
+ memory@0 {
+ device_type = "memory";
+
+ /* Typical ranges. The bootloader should fill these in. */
+ reg = <0x06000000 0x02000000>,
+ <0x0e000000 0x02000000>;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ /* 1/2 of the CPU core clock (standard MIPS behavior) */
+ mips-hpt-frequency = <300000000>;
+
+ cpu@0 {
+ compatible = "brcm,bmips4350";
+ device_type = "cpu";
+ reg = <0>;
+ };
+ };
+
+ cpu_intc: cpu_intc {
+ #address-cells = <0>;
+ compatible = "mti,cpu-interrupt-controller";
+
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+
+ clocks {
+ periph_clk: periph_clk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <54000000>;
+ };
+ };
+
+ aliases {
+ uart0 = &uart0;
+ };
+
+ ubus {
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ compatible = "brcm,ubus", "simple-bus";
+ ranges;
+ /* No dma-ranges on Viper. */
+
+ periph_intc: periph_intc@14e00048 {
+ compatible = "brcm,bcm3380-l2-intc";
+ reg = <0x14e00048 0x4 0x14e0004c 0x4>,
+ <0x14e00350 0x4 0x14e00354 0x4>;
+
+ interrupt-controller;
+ #interrupt-cells = <1>;
+
+ interrupt-parent = <&cpu_intc>;
+ interrupts = <4>;
+ };
+
+ cmips_intc: cmips_intc@151f8048 {
+ compatible = "brcm,bcm3380-l2-intc";
+ reg = <0x151f8048 0x4 0x151f804c 0x4>;
+
+ interrupt-controller;
+ #interrupt-cells = <1>;
+
+ interrupt-parent = <&periph_intc>;
+ interrupts = <30>;
+ brcm,int-map-mask = <0xffffffff>;
+ };
+
+ uart0: serial@14e00520 {
+ compatible = "brcm,bcm6345-uart";
+ reg = <0x14e00520 0x18>;
+ interrupt-parent = <&periph_intc>;
+ interrupts = <2>;
+ clocks = <&periph_clk>;
+ status = "disabled";
+ };
+
+ ehci0: usb@15400300 {
+ compatible = "brcm,bcm3384-ehci", "generic-ehci";
+ reg = <0x15400300 0x100>;
+ big-endian;
+ interrupt-parent = <&periph_intc>;
+ interrupts = <41>;
+ status = "disabled";
+ };
+
+ ohci0: usb@15400400 {
+ compatible = "brcm,bcm3384-ohci", "generic-ohci";
+ reg = <0x15400400 0x100>;
+ big-endian;
+ no-big-frame-no;
+ interrupt-parent = <&periph_intc>;
+ interrupts = <40>;
+ status = "disabled";
+ };
+ };
+};
diff --git a/arch/mips/boot/dts/bcm3384_zephyr.dtsi b/arch/mips/boot/dts/bcm3384_zephyr.dtsi
new file mode 100644
index 000000000000..a7bd8564e9f6
--- /dev/null
+++ b/arch/mips/boot/dts/bcm3384_zephyr.dtsi
@@ -0,0 +1,126 @@
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "brcm,bcm3384", "brcm,bcm33843";
+
+ memory@0 {
+ device_type = "memory";
+
+ /* Typical range. The bootloader should fill this in. */
+ reg = <0x0 0x08000000>;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ /* On BMIPS5000 this is 1/8th of the CPU core clock */
+ mips-hpt-frequency = <100000000>;
+
+ cpu@0 {
+ compatible = "brcm,bmips5000";
+ device_type = "cpu";
+ reg = <0>;
+ };
+
+ cpu@1 {
+ compatible = "brcm,bmips5000";
+ device_type = "cpu";
+ reg = <1>;
+ };
+ };
+
+ cpu_intc: cpu_intc {
+ #address-cells = <0>;
+ compatible = "mti,cpu-interrupt-controller";
+
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+
+ clocks {
+ periph_clk: periph_clk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <54000000>;
+ };
+ };
+
+ aliases {
+ uart0 = &uart0;
+ };
+
+ ubus {
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ compatible = "brcm,ubus", "simple-bus";
+ ranges;
+ dma-ranges = <0x00000000 0x08000000 0x08000000>,
+ <0x08000000 0x00000000 0x08000000>;
+
+ periph_intc: periph_intc@14e00038 {
+ compatible = "brcm,bcm3380-l2-intc";
+ reg = <0x14e00038 0x4 0x14e0003c 0x4>,
+ <0x14e00340 0x4 0x14e00344 0x4>;
+
+ interrupt-controller;
+ #interrupt-cells = <1>;
+
+ interrupt-parent = <&cpu_intc>;
+ interrupts = <4>;
+ };
+
+ zmips_intc: zmips_intc@104b0060 {
+ compatible = "brcm,bcm3380-l2-intc";
+ reg = <0x104b0060 0x4 0x104b0064 0x4>;
+
+ interrupt-controller;
+ #interrupt-cells = <1>;
+
+ interrupt-parent = <&periph_intc>;
+ interrupts = <29>;
+ brcm,int-map-mask = <0xffffffff>;
+ };
+
+ iop_intc: iop_intc@14e00058 {
+ compatible = "brcm,bcm3380-l2-intc";
+ reg = <0x14e00058 0x4 0x14e0005c 0x4>;
+
+ interrupt-controller;
+ #interrupt-cells = <1>;
+
+ interrupt-parent = <&cpu_intc>;
+ interrupts = <6>;
+ brcm,int-map-mask = <0xffffffff>;
+ };
+
+ uart0: serial@14e00520 {
+ compatible = "brcm,bcm6345-uart";
+ reg = <0x14e00520 0x18>;
+ interrupt-parent = <&periph_intc>;
+ interrupts = <2>;
+ clocks = <&periph_clk>;
+ status = "disabled";
+ };
+
+ ehci0: usb@15400300 {
+ compatible = "brcm,bcm3384-ehci", "generic-ehci";
+ reg = <0x15400300 0x100>;
+ big-endian;
+ interrupt-parent = <&periph_intc>;
+ interrupts = <41>;
+ status = "disabled";
+ };
+
+ ohci0: usb@15400400 {
+ compatible = "brcm,bcm3384-ohci", "generic-ohci";
+ reg = <0x15400400 0x100>;
+ big-endian;
+ no-big-frame-no;
+ interrupt-parent = <&periph_intc>;
+ interrupts = <40>;
+ status = "disabled";
+ };
+ };
+};
diff --git a/arch/mips/boot/dts/bcm6328.dtsi b/arch/mips/boot/dts/bcm6328.dtsi
new file mode 100644
index 000000000000..41891c1e58bd
--- /dev/null
+++ b/arch/mips/boot/dts/bcm6328.dtsi
@@ -0,0 +1,86 @@
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "brcm,bcm6328";
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ mips-hpt-frequency = <160000000>;
+
+ cpu@0 {
+ compatible = "brcm,bmips4350";
+ device_type = "cpu";
+ reg = <0>;
+ };
+
+ cpu@1 {
+ compatible = "brcm,bmips4350";
+ device_type = "cpu";
+ reg = <1>;
+ };
+ };
+
+ clocks {
+ periph_clk: periph_clk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <50000000>;
+ };
+ };
+
+ aliases {
+ uart0 = &uart0;
+ };
+
+ cpu_intc: cpu_intc {
+ #address-cells = <0>;
+ compatible = "mti,cpu-interrupt-controller";
+
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+
+ ubus {
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ compatible = "simple-bus";
+ ranges;
+
+ periph_intc: periph_intc@10000020 {
+ compatible = "brcm,bcm3380-l2-intc";
+ reg = <0x10000024 0x4 0x1000002c 0x4>,
+ <0x10000020 0x4 0x10000028 0x4>;
+
+ interrupt-controller;
+ #interrupt-cells = <1>;
+
+ interrupt-parent = <&cpu_intc>;
+ interrupts = <2>;
+ };
+
+ uart0: serial@10000100 {
+ compatible = "brcm,bcm6345-uart";
+ reg = <0x10000100 0x18>;
+ interrupt-parent = <&periph_intc>;
+ interrupts = <28>;
+ clocks = <&periph_clk>;
+ status = "disabled";
+ };
+
+ timer: timer@10000040 {
+ compatible = "syscon";
+ reg = <0x10000040 0x2c>;
+ little-endian;
+ };
+
+ reboot {
+ compatible = "syscon-reboot";
+ regmap = <&timer>;
+ offset = <0x28>;
+ mask = <0x1>;
+ };
+ };
+};
diff --git a/arch/mips/boot/dts/bcm6368.dtsi b/arch/mips/boot/dts/bcm6368.dtsi
new file mode 100644
index 000000000000..45152bc22117
--- /dev/null
+++ b/arch/mips/boot/dts/bcm6368.dtsi
@@ -0,0 +1,93 @@
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "brcm,bcm6368";
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ mips-hpt-frequency = <200000000>;
+
+ cpu@0 {
+ compatible = "brcm,bmips4350";
+ device_type = "cpu";
+ reg = <0>;
+ };
+
+ cpu@1 {
+ compatible = "brcm,bmips4350";
+ device_type = "cpu";
+ reg = <1>;
+ };
+
+ };
+
+ clocks {
+ periph_clk: periph_clk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <50000000>;
+ };
+ };
+
+ aliases {
+ uart0 = &uart0;
+ };
+
+ cpu_intc: cpu_intc {
+ #address-cells = <0>;
+ compatible = "mti,cpu-interrupt-controller";
+
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+
+ ubus {
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ compatible = "simple-bus";
+ ranges;
+
+ periph_intc: periph_intc@10000020 {
+ compatible = "brcm,bcm3380-l2-intc";
+ reg = <0x10000024 0x4 0x1000002c 0x4>,
+ <0x10000020 0x4 0x10000028 0x4>;
+
+ interrupt-controller;
+ #interrupt-cells = <1>;
+
+ interrupt-parent = <&cpu_intc>;
+ interrupts = <2>;
+ };
+
+ uart0: serial@10000100 {
+ compatible = "brcm,bcm6345-uart";
+ reg = <0x10000100 0x18>;
+ interrupt-parent = <&periph_intc>;
+ interrupts = <2>;
+ clocks = <&periph_clk>;
+ status = "disabled";
+ };
+
+ ehci0: usb@10001500 {
+ compatible = "brcm,bcm6368-ehci", "generic-ehci";
+ reg = <0x10001500 0x100>;
+ big-endian;
+ interrupt-parent = <&periph_intc>;
+ interrupts = <7>;
+ status = "disabled";
+ };
+
+ ohci0: usb@10001600 {
+ compatible = "brcm,bcm6368-ohci", "generic-ohci";
+ reg = <0x10001600 0x100>;
+ big-endian;
+ no-big-frame-no;
+ interrupt-parent = <&periph_intc>;
+ interrupts = <5>;
+ status = "disabled";
+ };
+ };
+};
diff --git a/arch/mips/boot/dts/bcm7125.dtsi b/arch/mips/boot/dts/bcm7125.dtsi
new file mode 100644
index 000000000000..1a7efa883c5e
--- /dev/null
+++ b/arch/mips/boot/dts/bcm7125.dtsi
@@ -0,0 +1,139 @@
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "brcm,bcm7125";
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ mips-hpt-frequency = <202500000>;
+
+ cpu@0 {
+ compatible = "brcm,bmips4380";
+ device_type = "cpu";
+ reg = <0>;
+ };
+
+ cpu@1 {
+ compatible = "brcm,bmips4380";
+ device_type = "cpu";
+ reg = <1>;
+ };
+ };
+
+ aliases {
+ uart0 = &uart0;
+ };
+
+ cpu_intc: cpu_intc {
+ #address-cells = <0>;
+ compatible = "mti,cpu-interrupt-controller";
+
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+
+ clocks {
+ uart_clk: uart_clk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <81000000>;
+ };
+ };
+
+ rdb {
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ compatible = "simple-bus";
+ ranges = <0 0x10000000 0x01000000>;
+
+ periph_intc: periph_intc@441400 {
+ compatible = "brcm,bcm7038-l1-intc";
+ reg = <0x441400 0x30>, <0x441600 0x30>;
+
+ interrupt-controller;
+ #interrupt-cells = <1>;
+
+ interrupt-parent = <&cpu_intc>;
+ interrupts = <2>, <3>;
+ };
+
+ sun_l2_intc: sun_l2_intc@401800 {
+ compatible = "brcm,l2-intc";
+ reg = <0x401800 0x30>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ interrupt-parent = <&periph_intc>;
+ interrupts = <23>;
+ };
+
+ gisb-arb@400000 {
+ compatible = "brcm,bcm7400-gisb-arb";
+ reg = <0x400000 0xdc>;
+ native-endian;
+ interrupt-parent = <&sun_l2_intc>;
+ interrupts = <0>, <2>;
+ brcm,gisb-arb-master-mask = <0x2f7>;
+ brcm,gisb-arb-master-names = "ssp_0", "cpu_0", "pci_0",
+ "bsp_0", "rdc_0", "rptd_0",
+ "avd_0", "jtag_0";
+ };
+
+ upg_irq0_intc: upg_irq0_intc@406780 {
+ compatible = "brcm,bcm7120-l2-intc";
+ reg = <0x406780 0x8>;
+
+ brcm,int-map-mask = <0x44>;
+ brcm,int-fwd-mask = <0x70000>;
+
+ interrupt-controller;
+ #interrupt-cells = <1>;
+
+ interrupt-parent = <&periph_intc>;
+ interrupts = <18>;
+ };
+
+ sun_top_ctrl: syscon@404000 {
+ compatible = "brcm,bcm7125-sun-top-ctrl", "syscon";
+ reg = <0x404000 0x60c>;
+ little-endian;
+ };
+
+ reboot {
+ compatible = "brcm,bcm7038-reboot";
+ syscon = <&sun_top_ctrl 0x8 0x14>;
+ };
+
+ uart0: serial@406b00 {
+ compatible = "ns16550a";
+ reg = <0x406b00 0x20>;
+ reg-io-width = <0x4>;
+ reg-shift = <0x2>;
+ native-endian;
+ interrupt-parent = <&periph_intc>;
+ interrupts = <21>;
+ clocks = <&uart_clk>;
+ status = "disabled";
+ };
+
+ ehci0: usb@488300 {
+ compatible = "brcm,bcm7125-ehci", "generic-ehci";
+ reg = <0x488300 0x100>;
+ native-endian;
+ interrupt-parent = <&periph_intc>;
+ interrupts = <60>;
+ status = "disabled";
+ };
+
+ ohci0: usb@488400 {
+ compatible = "brcm,bcm7125-ohci", "generic-ohci";
+ reg = <0x488400 0x100>;
+ native-endian;
+ interrupt-parent = <&periph_intc>;
+ interrupts = <61>;
+ status = "disabled";
+ };
+ };
+};
diff --git a/arch/mips/boot/dts/bcm7346.dtsi b/arch/mips/boot/dts/bcm7346.dtsi
new file mode 100644
index 000000000000..1f30728a3177
--- /dev/null
+++ b/arch/mips/boot/dts/bcm7346.dtsi
@@ -0,0 +1,224 @@
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "brcm,bcm7346";
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ mips-hpt-frequency = <163125000>;
+
+ cpu@0 {
+ compatible = "brcm,bmips5000";
+ device_type = "cpu";
+ reg = <0>;
+ };
+
+ cpu@1 {
+ compatible = "brcm,bmips5000";
+ device_type = "cpu";
+ reg = <1>;
+ };
+ };
+
+ aliases {
+ uart0 = &uart0;
+ };
+
+ cpu_intc: cpu_intc {
+ #address-cells = <0>;
+ compatible = "mti,cpu-interrupt-controller";
+
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+
+ clocks {
+ uart_clk: uart_clk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <81000000>;
+ };
+ };
+
+ rdb {
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ compatible = "simple-bus";
+ ranges = <0 0x10000000 0x01000000>;
+
+ periph_intc: periph_intc@411400 {
+ compatible = "brcm,bcm7038-l1-intc";
+ reg = <0x411400 0x30>, <0x411600 0x30>;
+
+ interrupt-controller;
+ #interrupt-cells = <1>;
+
+ interrupt-parent = <&cpu_intc>;
+ interrupts = <2>, <3>;
+ };
+
+ sun_l2_intc: sun_l2_intc@403000 {
+ compatible = "brcm,l2-intc";
+ reg = <0x403000 0x30>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ interrupt-parent = <&periph_intc>;
+ interrupts = <51>;
+ };
+
+ gisb-arb@400000 {
+ compatible = "brcm,bcm7400-gisb-arb";
+ reg = <0x400000 0xdc>;
+ native-endian;
+ interrupt-parent = <&sun_l2_intc>;
+ interrupts = <0>, <2>;
+ brcm,gisb-arb-master-mask = <0x673>;
+ brcm,gisb-arb-master-names = "ssp_0", "cpu_0", "bsp_0",
+ "rdc_0", "raaga_0",
+ "jtag_0", "svd_0";
+ };
+
+ upg_irq0_intc: upg_irq0_intc@406780 {
+ compatible = "brcm,bcm7120-l2-intc";
+ reg = <0x406780 0x8>;
+
+ brcm,int-map-mask = <0x44>;
+ brcm,int-fwd-mask = <0x70000>;
+
+ interrupt-controller;
+ #interrupt-cells = <1>;
+
+ interrupt-parent = <&periph_intc>;
+ interrupts = <59>;
+ };
+
+ sun_top_ctrl: syscon@404000 {
+ compatible = "brcm,bcm7346-sun-top-ctrl", "syscon";
+ reg = <0x404000 0x51c>;
+ little-endian;
+ };
+
+ reboot {
+ compatible = "brcm,brcmstb-reboot";
+ syscon = <&sun_top_ctrl 0x304 0x308>;
+ };
+
+ uart0: serial@406900 {
+ compatible = "ns16550a";
+ reg = <0x406900 0x20>;
+ reg-io-width = <0x4>;
+ reg-shift = <0x2>;
+ native-endian;
+ interrupt-parent = <&periph_intc>;
+ interrupts = <64>;
+ clocks = <&uart_clk>;
+ status = "disabled";
+ };
+
+ enet0: ethernet@430000 {
+ phy-mode = "internal";
+ phy-handle = <&phy1>;
+ mac-address = [ 00 10 18 36 23 1a ];
+ compatible = "brcm,genet-v2";
+ #address-cells = <0x1>;
+ #size-cells = <0x1>;
+ reg = <0x430000 0x4c8c>;
+ interrupts = <24>, <25>;
+ interrupt-parent = <&periph_intc>;
+ status = "disabled";
+
+ mdio@e14 {
+ compatible = "brcm,genet-mdio-v2";
+ #address-cells = <0x1>;
+ #size-cells = <0x0>;
+ reg = <0xe14 0x8>;
+
+ phy1: ethernet-phy@1 {
+ max-speed = <100>;
+ reg = <0x1>;
+ compatible = "brcm,40nm-ephy",
+ "ethernet-phy-ieee802.3-c22";
+ };
+ };
+ };
+
+ ehci0: usb@480300 {
+ compatible = "brcm,bcm7346-ehci", "generic-ehci";
+ reg = <0x480300 0x100>;
+ native-endian;
+ interrupt-parent = <&periph_intc>;
+ interrupts = <68>;
+ status = "disabled";
+ };
+
+ ohci0: usb@480400 {
+ compatible = "brcm,bcm7346-ohci", "generic-ohci";
+ reg = <0x480400 0x100>;
+ native-endian;
+ no-big-frame-no;
+ interrupt-parent = <&periph_intc>;
+ interrupts = <70>;
+ status = "disabled";
+ };
+
+ ehci1: usb@480500 {
+ compatible = "brcm,bcm7346-ehci", "generic-ehci";
+ reg = <0x480500 0x100>;
+ native-endian;
+ interrupt-parent = <&periph_intc>;
+ interrupts = <69>;
+ status = "disabled";
+ };
+
+ ohci1: usb@480600 {
+ compatible = "brcm,bcm7346-ohci", "generic-ohci";
+ reg = <0x480600 0x100>;
+ native-endian;
+ no-big-frame-no;
+ interrupt-parent = <&periph_intc>;
+ interrupts = <71>;
+ status = "disabled";
+ };
+
+ ehci2: usb@490300 {
+ compatible = "brcm,bcm7346-ehci", "generic-ehci";
+ reg = <0x490300 0x100>;
+ native-endian;
+ interrupt-parent = <&periph_intc>;
+ interrupts = <73>;
+ status = "disabled";
+ };
+
+ ohci2: usb@490400 {
+ compatible = "brcm,bcm7346-ohci", "generic-ohci";
+ reg = <0x490400 0x100>;
+ native-endian;
+ no-big-frame-no;
+ interrupt-parent = <&periph_intc>;
+ interrupts = <75>;
+ status = "disabled";
+ };
+
+ ehci3: usb@490500 {
+ compatible = "brcm,bcm7346-ehci", "generic-ehci";
+ reg = <0x490500 0x100>;
+ native-endian;
+ interrupt-parent = <&periph_intc>;
+ interrupts = <74>;
+ status = "disabled";
+ };
+
+ ohci3: usb@490600 {
+ compatible = "brcm,bcm7346-ohci", "generic-ohci";
+ reg = <0x490600 0x100>;
+ native-endian;
+ no-big-frame-no;
+ interrupt-parent = <&periph_intc>;
+ interrupts = <76>;
+ status = "disabled";
+ };
+ };
+};
diff --git a/arch/mips/boot/dts/bcm7360.dtsi b/arch/mips/boot/dts/bcm7360.dtsi
new file mode 100644
index 000000000000..f23b0aed276f
--- /dev/null
+++ b/arch/mips/boot/dts/bcm7360.dtsi
@@ -0,0 +1,161 @@
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "brcm,bcm7360";
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ mips-hpt-frequency = <375000000>;
+
+ cpu@0 {
+ compatible = "brcm,bmips3300";
+ device_type = "cpu";
+ reg = <0>;
+ };
+ };
+
+ aliases {
+ uart0 = &uart0;
+ };
+
+ cpu_intc: cpu_intc {
+ #address-cells = <0>;
+ compatible = "mti,cpu-interrupt-controller";
+
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+
+ clocks {
+ uart_clk: uart_clk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <81000000>;
+ };
+ };
+
+ rdb {
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ compatible = "simple-bus";
+ ranges = <0 0x10000000 0x01000000>;
+
+ periph_intc: periph_intc@411400 {
+ compatible = "brcm,bcm7038-l1-intc";
+ reg = <0x411400 0x30>;
+
+ interrupt-controller;
+ #interrupt-cells = <1>;
+
+ interrupt-parent = <&cpu_intc>;
+ interrupts = <2>;
+ };
+
+ sun_l2_intc: sun_l2_intc@403000 {
+ compatible = "brcm,l2-intc";
+ reg = <0x403000 0x30>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ interrupt-parent = <&periph_intc>;
+ interrupts = <48>;
+ };
+
+ gisb-arb@400000 {
+ compatible = "brcm,bcm7400-gisb-arb";
+ reg = <0x400000 0xdc>;
+ native-endian;
+ interrupt-parent = <&sun_l2_intc>;
+ interrupts = <0>, <2>;
+ brcm,gisb-arb-master-mask = <0x2f3>;
+ brcm,gisb-arb-master-names = "ssp_0", "cpu_0", "bsp_0",
+ "rdc_0", "raaga_0",
+ "avd_0", "jtag_0";
+ };
+
+ upg_irq0_intc: upg_irq0_intc@406600 {
+ compatible = "brcm,bcm7120-l2-intc";
+ reg = <0x406600 0x8>;
+
+ brcm,int-map-mask = <0x44>;
+ brcm,int-fwd-mask = <0x70000>;
+
+ interrupt-controller;
+ #interrupt-cells = <1>;
+
+ interrupt-parent = <&periph_intc>;
+ interrupts = <56>;
+ };
+
+ sun_top_ctrl: syscon@404000 {
+ compatible = "brcm,bcm7360-sun-top-ctrl", "syscon";
+ reg = <0x404000 0x51c>;
+ little-endian;
+ };
+
+ reboot {
+ compatible = "brcm,brcmstb-reboot";
+ syscon = <&sun_top_ctrl 0x304 0x308>;
+ };
+
+ uart0: serial@406800 {
+ compatible = "ns16550a";
+ reg = <0x406800 0x20>;
+ reg-io-width = <0x4>;
+ reg-shift = <0x2>;
+ native-endian;
+ interrupt-parent = <&periph_intc>;
+ interrupts = <61>;
+ clocks = <&uart_clk>;
+ status = "disabled";
+ };
+
+ enet0: ethernet@430000 {
+ phy-mode = "internal";
+ phy-handle = <&phy1>;
+ mac-address = [ 00 10 18 36 23 1a ];
+ compatible = "brcm,genet-v2";
+ #address-cells = <0x1>;
+ #size-cells = <0x1>;
+ reg = <0x430000 0x4c8c>;
+ interrupts = <24>, <25>;
+ interrupt-parent = <&periph_intc>;
+ status = "disabled";
+
+ mdio@e14 {
+ compatible = "brcm,genet-mdio-v2";
+ #address-cells = <0x1>;
+ #size-cells = <0x0>;
+ reg = <0xe14 0x8>;
+
+ phy1: ethernet-phy@1 {
+ max-speed = <100>;
+ reg = <0x1>;
+ compatible = "brcm,40nm-ephy",
+ "ethernet-phy-ieee802.3-c22";
+ };
+ };
+ };
+
+ ehci0: usb@480300 {
+ compatible = "brcm,bcm7360-ehci", "generic-ehci";
+ reg = <0x480300 0x100>;
+ native-endian;
+ interrupt-parent = <&periph_intc>;
+ interrupts = <65>;
+ status = "disabled";
+ };
+
+ ohci0: usb@480400 {
+ compatible = "brcm,bcm7360-ohci", "generic-ohci";
+ reg = <0x480400 0x100>;
+ native-endian;
+ no-big-frame-no;
+ interrupt-parent = <&periph_intc>;
+ interrupts = <66>;
+ status = "disabled";
+ };
+ };
+};
diff --git a/arch/mips/boot/dts/bcm7420.dtsi b/arch/mips/boot/dts/bcm7420.dtsi
new file mode 100644
index 000000000000..5f55d0a50a28
--- /dev/null
+++ b/arch/mips/boot/dts/bcm7420.dtsi
@@ -0,0 +1,184 @@
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "brcm,bcm7420";
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ mips-hpt-frequency = <93750000>;
+
+ cpu@0 {
+ compatible = "brcm,bmips5000";
+ device_type = "cpu";
+ reg = <0>;
+ };
+
+ cpu@1 {
+ compatible = "brcm,bmips5000";
+ device_type = "cpu";
+ reg = <1>;
+ };
+ };
+
+ aliases {
+ uart0 = &uart0;
+ };
+
+ cpu_intc: cpu_intc {
+ #address-cells = <0>;
+ compatible = "mti,cpu-interrupt-controller";
+
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+
+ clocks {
+ uart_clk: uart_clk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <81000000>;
+ };
+ };
+
+ rdb {
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ compatible = "simple-bus";
+ ranges = <0 0x10000000 0x01000000>;
+
+ periph_intc: periph_intc@441400 {
+ compatible = "brcm,bcm7038-l1-intc";
+ reg = <0x441400 0x30>, <0x441600 0x30>;
+
+ interrupt-controller;
+ #interrupt-cells = <1>;
+
+ interrupt-parent = <&cpu_intc>;
+ interrupts = <2>, <3>;
+ };
+
+ sun_l2_intc: sun_l2_intc@401800 {
+ compatible = "brcm,l2-intc";
+ reg = <0x401800 0x30>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ interrupt-parent = <&periph_intc>;
+ interrupts = <23>;
+ };
+
+ gisb-arb@400000 {
+ compatible = "brcm,bcm7400-gisb-arb";
+ reg = <0x400000 0xdc>;
+ native-endian;
+ interrupt-parent = <&sun_l2_intc>;
+ interrupts = <0>, <2>;
+ brcm,gisb-arb-master-mask = <0x3ff>;
+ brcm,gisb-arb-master-names = "ssp_0", "cpu_0", "pci_0",
+ "pcie_0", "bsp_0", "rdc_0",
+ "rptd_0", "avd_0", "avd_1",
+ "jtag_0";
+ };
+
+ upg_irq0_intc: upg_irq0_intc@406780 {
+ compatible = "brcm,bcm7120-l2-intc";
+ reg = <0x406780 0x8>;
+
+ brcm,int-map-mask = <0x44>;
+ brcm,int-fwd-mask = <0x70000>;
+
+ interrupt-controller;
+ #interrupt-cells = <1>;
+
+ interrupt-parent = <&periph_intc>;
+ interrupts = <18>;
+ };
+
+ sun_top_ctrl: syscon@404000 {
+ compatible = "brcm,bcm7420-sun-top-ctrl", "syscon";
+ reg = <0x404000 0x60c>;
+ little-endian;
+ };
+
+ reboot {
+ compatible = "brcm,bcm7038-reboot";
+ syscon = <&sun_top_ctrl 0x8 0x14>;
+ };
+
+ uart0: serial@406b00 {
+ compatible = "ns16550a";
+ reg = <0x406b00 0x20>;
+ reg-io-width = <0x4>;
+ reg-shift = <0x2>;
+ interrupt-parent = <&periph_intc>;
+ interrupts = <21>;
+ clocks = <&uart_clk>;
+ status = "disabled";
+ };
+
+ enet0: ethernet@468000 {
+ phy-mode = "internal";
+ phy-handle = <&phy1>;
+ mac-address = [ 00 10 18 36 23 1a ];
+ compatible = "brcm,genet-v1";
+ #address-cells = <0x1>;
+ #size-cells = <0x1>;
+ reg = <0x468000 0x3c8c>;
+ interrupts = <69>, <79>;
+ interrupt-parent = <&periph_intc>;
+ status = "disabled";
+
+ mdio@e14 {
+ compatible = "brcm,genet-mdio-v1";
+ #address-cells = <0x1>;
+ #size-cells = <0x0>;
+ reg = <0xe14 0x8>;
+
+ phy1: ethernet-phy@1 {
+ max-speed = <100>;
+ reg = <0x1>;
+ compatible = "brcm,65nm-ephy",
+ "ethernet-phy-ieee802.3-c22";
+ };
+ };
+ };
+
+ ehci0: usb@488300 {
+ compatible = "brcm,bcm7420-ehci", "generic-ehci";
+ reg = <0x488300 0x100>;
+ interrupt-parent = <&periph_intc>;
+ interrupts = <60>;
+ status = "disabled";
+ };
+
+ ohci0: usb@488400 {
+ compatible = "brcm,bcm7420-ohci", "generic-ohci";
+ reg = <0x488400 0x100>;
+ native-endian;
+ no-big-frame-no;
+ interrupt-parent = <&periph_intc>;
+ interrupts = <61>;
+ status = "disabled";
+ };
+
+ ehci1: usb@488500 {
+ compatible = "brcm,bcm7420-ehci", "generic-ehci";
+ reg = <0x488500 0x100>;
+ interrupt-parent = <&periph_intc>;
+ interrupts = <55>;
+ status = "disabled";
+ };
+
+ ohci1: usb@488600 {
+ compatible = "brcm,bcm7420-ohci", "generic-ohci";
+ reg = <0x488600 0x100>;
+ native-endian;
+ no-big-frame-no;
+ interrupt-parent = <&periph_intc>;
+ interrupts = <62>;
+ status = "disabled";
+ };
+ };
+};
diff --git a/arch/mips/boot/dts/bcm7425.dtsi b/arch/mips/boot/dts/bcm7425.dtsi
new file mode 100644
index 000000000000..5b660b617ead
--- /dev/null
+++ b/arch/mips/boot/dts/bcm7425.dtsi
@@ -0,0 +1,225 @@
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "brcm,bcm7425";
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ mips-hpt-frequency = <163125000>;
+
+ cpu@0 {
+ compatible = "brcm,bmips5000";
+ device_type = "cpu";
+ reg = <0>;
+ };
+
+ cpu@1 {
+ compatible = "brcm,bmips5000";
+ device_type = "cpu";
+ reg = <1>;
+ };
+ };
+
+ aliases {
+ uart0 = &uart0;
+ };
+
+ cpu_intc: cpu_intc {
+ #address-cells = <0>;
+ compatible = "mti,cpu-interrupt-controller";
+
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+
+ clocks {
+ uart_clk: uart_clk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <81000000>;
+ };
+ };
+
+ rdb {
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ compatible = "simple-bus";
+ ranges = <0 0x10000000 0x01000000>;
+
+ periph_intc: periph_intc@41a400 {
+ compatible = "brcm,bcm7038-l1-intc";
+ reg = <0x41a400 0x30>, <0x41a600 0x30>;
+
+ interrupt-controller;
+ #interrupt-cells = <1>;
+
+ interrupt-parent = <&cpu_intc>;
+ interrupts = <2>, <3>;
+ };
+
+ sun_l2_intc: sun_l2_intc@403000 {
+ compatible = "brcm,l2-intc";
+ reg = <0x403000 0x30>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ interrupt-parent = <&periph_intc>;
+ interrupts = <47>;
+ };
+
+ gisb-arb@400000 {
+ compatible = "brcm,bcm7400-gisb-arb";
+ reg = <0x400000 0xdc>;
+ native-endian;
+ interrupt-parent = <&sun_l2_intc>;
+ interrupts = <0>, <2>;
+ brcm,gisb-arb-master-mask = <0x177b>;
+ brcm,gisb-arb-master-names = "ssp_0", "cpu_0", "pcie_0",
+ "bsp_0", "rdc_0",
+ "raaga_0", "avd_1",
+ "jtag_0", "svd_0",
+ "vice_0";
+ };
+
+ upg_irq0_intc: upg_irq0_intc@406780 {
+ compatible = "brcm,bcm7120-l2-intc";
+ reg = <0x406780 0x8>;
+
+ brcm,int-map-mask = <0x44>;
+ brcm,int-fwd-mask = <0x70000>;
+
+ interrupt-controller;
+ #interrupt-cells = <1>;
+
+ interrupt-parent = <&periph_intc>;
+ interrupts = <55>;
+ };
+
+ sun_top_ctrl: syscon@404000 {
+ compatible = "brcm,bcm7425-sun-top-ctrl", "syscon";
+ reg = <0x404000 0x51c>;
+ little-endian;
+ };
+
+ reboot {
+ compatible = "brcm,brcmstb-reboot";
+ syscon = <&sun_top_ctrl 0x304 0x308>;
+ };
+
+ uart0: serial@406b00 {
+ compatible = "ns16550a";
+ reg = <0x406b00 0x20>;
+ reg-io-width = <0x4>;
+ reg-shift = <0x2>;
+ interrupt-parent = <&periph_intc>;
+ interrupts = <61>;
+ clocks = <&uart_clk>;
+ status = "disabled";
+ };
+
+ enet0: ethernet@b80000 {
+ phy-mode = "internal";
+ phy-handle = <&phy1>;
+ mac-address = [ 00 10 18 36 23 1a ];
+ compatible = "brcm,genet-v3";
+ #address-cells = <0x1>;
+ #size-cells = <0x1>;
+ reg = <0xb80000 0x11c88>;
+ interrupts = <17>, <18>;
+ interrupt-parent = <&periph_intc>;
+ status = "disabled";
+
+ mdio@e14 {
+ compatible = "brcm,genet-mdio-v3";
+ #address-cells = <0x1>;
+ #size-cells = <0x0>;
+ reg = <0xe14 0x8>;
+
+ phy1: ethernet-phy@1 {
+ max-speed = <100>;
+ reg = <0x1>;
+ compatible = "brcm,40nm-ephy",
+ "ethernet-phy-ieee802.3-c22";
+ };
+ };
+ };
+
+ ehci0: usb@480300 {
+ compatible = "brcm,bcm7425-ehci", "generic-ehci";
+ reg = <0x480300 0x100>;
+ native-endian;
+ interrupt-parent = <&periph_intc>;
+ interrupts = <65>;
+ status = "disabled";
+ };
+
+ ohci0: usb@480400 {
+ compatible = "brcm,bcm7425-ohci", "generic-ohci";
+ reg = <0x480400 0x100>;
+ native-endian;
+ no-big-frame-no;
+ interrupt-parent = <&periph_intc>;
+ interrupts = <67>;
+ status = "disabled";
+ };
+
+ ehci1: usb@480500 {
+ compatible = "brcm,bcm7425-ehci", "generic-ehci";
+ reg = <0x480500 0x100>;
+ native-endian;
+ interrupt-parent = <&periph_intc>;
+ interrupts = <66>;
+ status = "disabled";
+ };
+
+ ohci1: usb@480600 {
+ compatible = "brcm,bcm7425-ohci", "generic-ohci";
+ reg = <0x480600 0x100>;
+ native-endian;
+ no-big-frame-no;
+ interrupt-parent = <&periph_intc>;
+ interrupts = <68>;
+ status = "disabled";
+ };
+
+ ehci2: usb@490300 {
+ compatible = "brcm,bcm7425-ehci", "generic-ehci";
+ reg = <0x490300 0x100>;
+ native-endian;
+ interrupt-parent = <&periph_intc>;
+ interrupts = <70>;
+ status = "disabled";
+ };
+
+ ohci2: usb@490400 {
+ compatible = "brcm,bcm7425-ohci", "generic-ohci";
+ reg = <0x490400 0x100>;
+ native-endian;
+ no-big-frame-no;
+ interrupt-parent = <&periph_intc>;
+ interrupts = <72>;
+ status = "disabled";
+ };
+
+ ehci3: usb@490500 {
+ compatible = "brcm,bcm7425-ehci", "generic-ehci";
+ reg = <0x490500 0x100>;
+ native-endian;
+ interrupt-parent = <&periph_intc>;
+ interrupts = <71>;
+ status = "disabled";
+ };
+
+ ohci3: usb@490600 {
+ compatible = "brcm,bcm7425-ohci", "generic-ohci";
+ reg = <0x490600 0x100>;
+ native-endian;
+ no-big-frame-no;
+ interrupt-parent = <&periph_intc>;
+ interrupts = <73>;
+ status = "disabled";
+ };
+ };
+};
diff --git a/arch/mips/boot/dts/bcm93384wvg.dts b/arch/mips/boot/dts/bcm93384wvg.dts
new file mode 100644
index 000000000000..d1e44a17d41a
--- /dev/null
+++ b/arch/mips/boot/dts/bcm93384wvg.dts
@@ -0,0 +1,25 @@
+/dts-v1/;
+
+/include/ "bcm3384_zephyr.dtsi"
+
+/ {
+ compatible = "brcm,bcm93384wvg", "brcm,bcm3384";
+ model = "Broadcom BCM93384WVG";
+
+ chosen {
+ bootargs = "console=ttyS0,115200";
+ stdout-path = &uart0;
+ };
+};
+
+&uart0 {
+ status = "okay";
+};
+
+&ehci0 {
+ status = "okay";
+};
+
+&ohci0 {
+ status = "okay";
+};
diff --git a/arch/mips/boot/dts/bcm93384wvg_viper.dts b/arch/mips/boot/dts/bcm93384wvg_viper.dts
new file mode 100644
index 000000000000..1ecb2696aca8
--- /dev/null
+++ b/arch/mips/boot/dts/bcm93384wvg_viper.dts
@@ -0,0 +1,25 @@
+/dts-v1/;
+
+/include/ "bcm3384_viper.dtsi"
+
+/ {
+ compatible = "brcm,bcm93384wvg-viper", "brcm,bcm3384-viper";
+ model = "Broadcom BCM93384WVG-viper";
+
+ chosen {
+ bootargs = "console=ttyS0,115200";
+ stdout-path = &uart0;
+ };
+};
+
+&uart0 {
+ status = "okay";
+};
+
+&ehci0 {
+ status = "okay";
+};
+
+&ohci0 {
+ status = "okay";
+};
diff --git a/arch/mips/boot/dts/bcm96368mvwg.dts b/arch/mips/boot/dts/bcm96368mvwg.dts
new file mode 100644
index 000000000000..0e890c28fe5c
--- /dev/null
+++ b/arch/mips/boot/dts/bcm96368mvwg.dts
@@ -0,0 +1,31 @@
+/dts-v1/;
+
+/include/ "bcm6368.dtsi"
+
+/ {
+ compatible = "brcm,bcm96368mvwg", "brcm,bcm6368";
+ model = "Broadcom BCM96368MVWG";
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x00000000 0x04000000>;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,115200";
+ stdout-path = &uart0;
+ };
+};
+
+&uart0 {
+ status = "okay";
+};
+
+/* FIXME: need to set up USB_CTRL registers first */
+&ehci0 {
+ status = "disabled";
+};
+
+&ohci0 {
+ status = "disabled";
+};
diff --git a/arch/mips/boot/dts/bcm97125cbmb.dts b/arch/mips/boot/dts/bcm97125cbmb.dts
new file mode 100644
index 000000000000..e046b1109eab
--- /dev/null
+++ b/arch/mips/boot/dts/bcm97125cbmb.dts
@@ -0,0 +1,31 @@
+/dts-v1/;
+
+/include/ "bcm7125.dtsi"
+
+/ {
+ compatible = "brcm,bcm97125cbmb", "brcm,bcm7125";
+ model = "Broadcom BCM97125CBMB";
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x00000000 0x10000000>;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,115200";
+ stdout-path = &uart0;
+ };
+};
+
+&uart0 {
+ status = "okay";
+};
+
+/* FIXME: USB is wonky; disable it for now */
+&ehci0 {
+ status = "disabled";
+};
+
+&ohci0 {
+ status = "disabled";
+};
diff --git a/arch/mips/boot/dts/bcm97346dbsmb.dts b/arch/mips/boot/dts/bcm97346dbsmb.dts
new file mode 100644
index 000000000000..70f196d89d26
--- /dev/null
+++ b/arch/mips/boot/dts/bcm97346dbsmb.dts
@@ -0,0 +1,58 @@
+/dts-v1/;
+
+/include/ "bcm7346.dtsi"
+
+/ {
+ compatible = "brcm,bcm97346dbsmb", "brcm,bcm7346";
+ model = "Broadcom BCM97346DBSMB";
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x00000000 0x10000000>, <0x20000000 0x30000000>;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,115200";
+ stdout-path = &uart0;
+ };
+};
+
+&uart0 {
+ status = "okay";
+};
+
+&enet0 {
+ status = "okay";
+};
+
+&ehci0 {
+ status = "okay";
+};
+
+&ohci0 {
+ status = "okay";
+};
+
+&ehci1 {
+ status = "okay";
+};
+
+&ohci1 {
+ status = "okay";
+};
+
+&ehci2 {
+ status = "okay";
+};
+
+&ohci2 {
+ status = "okay";
+};
+
+&ehci3 {
+ status = "okay";
+};
+
+&ohci3 {
+ status = "okay";
+};
diff --git a/arch/mips/boot/dts/bcm97360svmb.dts b/arch/mips/boot/dts/bcm97360svmb.dts
new file mode 100644
index 000000000000..4fe515500102
--- /dev/null
+++ b/arch/mips/boot/dts/bcm97360svmb.dts
@@ -0,0 +1,34 @@
+/dts-v1/;
+
+/include/ "bcm7360.dtsi"
+
+/ {
+ compatible = "brcm,bcm97360svmb", "brcm,bcm7360";
+ model = "Broadcom BCM97360SVMB";
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x00000000 0x10000000>;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,115200";
+ stdout-path = &uart0;
+ };
+};
+
+&uart0 {
+ status = "okay";
+};
+
+&enet0 {
+ status = "okay";
+};
+
+&ehci0 {
+ status = "okay";
+};
+
+&ohci0 {
+ status = "okay";
+};
diff --git a/arch/mips/boot/dts/bcm97420c.dts b/arch/mips/boot/dts/bcm97420c.dts
new file mode 100644
index 000000000000..67fe1f3a3891
--- /dev/null
+++ b/arch/mips/boot/dts/bcm97420c.dts
@@ -0,0 +1,45 @@
+/dts-v1/;
+
+/include/ "bcm7420.dtsi"
+
+/ {
+ compatible = "brcm,bcm97420c", "brcm,bcm7420";
+ model = "Broadcom BCM97420C";
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x00000000 0x10000000>,
+ <0x20000000 0x30000000>,
+ <0x60000000 0x10000000>;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,115200";
+ stdout-path = &uart0;
+ };
+};
+
+&uart0 {
+ status = "okay";
+};
+
+/* FIXME: MAC driver comes up but cannot attach to PHY */
+&enet0 {
+ status = "disabled";
+};
+
+&ehci0 {
+ status = "okay";
+};
+
+&ohci0 {
+ status = "okay";
+};
+
+&ehci1 {
+ status = "okay";
+};
+
+&ohci1 {
+ status = "okay";
+};
diff --git a/arch/mips/boot/dts/bcm97425svmb.dts b/arch/mips/boot/dts/bcm97425svmb.dts
new file mode 100644
index 000000000000..689c68a4f9c8
--- /dev/null
+++ b/arch/mips/boot/dts/bcm97425svmb.dts
@@ -0,0 +1,60 @@
+/dts-v1/;
+
+/include/ "bcm7425.dtsi"
+
+/ {
+ compatible = "brcm,bcm97425svmb", "brcm,bcm7425";
+ model = "Broadcom BCM97425SVMB";
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x00000000 0x10000000>,
+ <0x20000000 0x30000000>,
+ <0x90000000 0x40000000>;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,115200";
+ stdout-path = &uart0;
+ };
+};
+
+&uart0 {
+ status = "okay";
+};
+
+&enet0 {
+ status = "okay";
+};
+
+&ehci0 {
+ status = "okay";
+};
+
+&ohci0 {
+ status = "okay";
+};
+
+&ehci1 {
+ status = "okay";
+};
+
+&ohci1 {
+ status = "okay";
+};
+
+&ehci2 {
+ status = "okay";
+};
+
+&ohci2 {
+ status = "okay";
+};
+
+&ehci3 {
+ status = "okay";
+};
+
+&ohci3 {
+ status = "okay";
+};
diff --git a/arch/mips/boot/dts/bcm9ejtagprb.dts b/arch/mips/boot/dts/bcm9ejtagprb.dts
new file mode 100644
index 000000000000..1da4608680aa
--- /dev/null
+++ b/arch/mips/boot/dts/bcm9ejtagprb.dts
@@ -0,0 +1,22 @@
+/dts-v1/;
+
+/include/ "bcm6328.dtsi"
+
+/ {
+ compatible = "brcm,bcm9ejtagprb", "brcm,bcm6328";
+ model = "Broadcom BCM9EJTAGPRB";
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x00000000 0x08000000>;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,115200";
+ stdout-path = &uart0;
+ };
+};
+
+&uart0 {
+ status = "okay";
+};
--
2.1.0
