2014-11-25 16:49 GMT-08:00 Kevin Cernekee <cernekee@xxxxxxxxx>:
> This patch series incorporates the following changes:
>
> - Extend brcmstb reset driver to work on MIPS (currently ARM-only).
>
> - Extend brcmstb GISB bus driver to work on MIPS (currently ARM-only).
>
> - Extend brcmstb GISB bus driver to work on BE systems (currently LE-only).
>
> - Extend both drivers to support the older register layouts used on many
> of the BMIPS platforms.
>
> - Extend {ohci,ehci}-platform drivers to accept the new "native-endian"
> DT property, to accommodate BCM7xxx platforms that can be switched
> between LE/BE with a board jumper.
>
>
> Dependencies:
>
> power/reset: brcmstb: Register with kernel restart handler (Guenter Roeck)
> of: Add helper function to check MMIO register endianness (Kevin Cernekee)
>
> These are both tentatively accepted, but might not be present in the same
> tree yet. As such, we might want to "review now, merge later."
For the entire series:
Acked-by: Florian Fainelli <f.fainelli@xxxxxxxxx>
I will probably take the brcmstb_gisb.c changes separately and submit
them to arm-soc as a "drivers" pull request since this driver has
typically been routed that way.
Thanks!
>
>
> Kevin Cernekee (9):
> power/reset: brcmstb: Make the driver buildable on MIPS
> power/reset: brcmstb: Use the DT "compatible" string to indicate bit
> positions
> power/reset: brcmstb: Add support for old 65nm chips
> bus: brcmstb_gisb: Make the driver buildable on MIPS
> bus: brcmstb_gisb: Introduce wrapper functions for MMIO accesses
> bus: brcmstb_gisb: Look up register offsets in a table
> bus: brcmstb_gisb: Add register offset tables for older chips
> bus: brcmstb_gisb: Honor the "big-endian" and "native-endian" DT
> properties
> usb: {ohci,ehci}-platform: Use new OF big-endian helper function
>
> .../devicetree/bindings/arm/brcm-brcmstb.txt | 4 +-
> .../devicetree/bindings/bus/brcm,gisb-arb.txt | 6 +-
> Documentation/devicetree/bindings/usb/usb-ehci.txt | 2 +
> Documentation/devicetree/bindings/usb/usb-ohci.txt | 2 +
> drivers/bus/Kconfig | 2 +-
> drivers/bus/brcmstb_gisb.c | 127 ++++++++++++++++++---
> drivers/power/reset/Kconfig | 9 +-
> drivers/power/reset/brcmstb-reboot.c | 41 +++++--
> drivers/usb/host/ehci-platform.c | 2 +-
> drivers/usb/host/ohci-platform.c | 2 +-
> 10 files changed, 161 insertions(+), 36 deletions(-)
>
> --
> 2.1.0
>
--
Florian
