Add cases for UPIO_MEM32BE wherever there are currently cases handling
UPIO_MEM32.
Signed-off-by: Kevin Cernekee <cernekee@xxxxxxxxx>
---
drivers/tty/serial/8250/8250_core.c | 20 ++++++++++++++++++++
drivers/tty/serial/8250/8250_early.c | 5 +++++
2 files changed, 25 insertions(+)
diff --git a/drivers/tty/serial/8250/8250_core.c b/drivers/tty/serial/8250/8250_core.c
index ca5cfdc..53982f0 100644
--- a/drivers/tty/serial/8250/8250_core.c
+++ b/drivers/tty/serial/8250/8250_core.c
@@ -428,6 +428,18 @@ static unsigned int mem32_serial_in(struct uart_port *p, int offset)
return readl(p->membase + offset);
}
+static void mem32be_serial_out(struct uart_port *p, int offset, int value)
+{
+ offset = offset << p->regshift;
+ iowrite32be(value, p->membase + offset);
+}
+
+static unsigned int mem32be_serial_in(struct uart_port *p, int offset)
+{
+ offset = offset << p->regshift;
+ return ioread32be(p->membase + offset);
+}
+
static unsigned int io_serial_in(struct uart_port *p, int offset)
{
offset = offset << p->regshift;
@@ -466,6 +478,11 @@ static void set_io_from_upio(struct uart_port *p)
p->serial_out = mem32_serial_out;
break;
+ case UPIO_MEM32BE:
+ p->serial_in = mem32be_serial_in;
+ p->serial_out = mem32be_serial_out;
+ break;
+
#if defined(CONFIG_MIPS_ALCHEMY) || defined(CONFIG_SERIAL_8250_RT288X)
case UPIO_AU:
p->serial_in = au_serial_in;
@@ -491,6 +508,7 @@ serial_port_out_sync(struct uart_port *p, int offset, int value)
switch (p->iotype) {
case UPIO_MEM:
case UPIO_MEM32:
+ case UPIO_MEM32BE:
case UPIO_AU:
p->serial_out(p, offset, value);
p->serial_in(p, UART_LCR); /* safe, no side-effects */
@@ -2655,6 +2673,7 @@ static int serial8250_request_std_resource(struct uart_8250_port *up)
case UPIO_AU:
case UPIO_TSI:
case UPIO_MEM32:
+ case UPIO_MEM32BE:
case UPIO_MEM:
if (!port->mapbase)
break;
@@ -2691,6 +2710,7 @@ static void serial8250_release_std_resource(struct uart_8250_port *up)
case UPIO_AU:
case UPIO_TSI:
case UPIO_MEM32:
+ case UPIO_MEM32BE:
case UPIO_MEM:
if (!port->mapbase)
break;
diff --git a/drivers/tty/serial/8250/8250_early.c b/drivers/tty/serial/8250/8250_early.c
index 4858b8a..33a0fb6 100644
--- a/drivers/tty/serial/8250/8250_early.c
+++ b/drivers/tty/serial/8250/8250_early.c
@@ -45,6 +45,8 @@ unsigned int __weak __init serial8250_early_in(struct uart_port *port, int offse
return readb(port->membase + offset);
case UPIO_MEM32:
return readl(port->membase + (offset << 2));
+ case UPIO_MEM32BE:
+ return ioread32be(port->membase + (offset << 2));
case UPIO_PORT:
return inb(port->iobase + offset);
default:
@@ -61,6 +63,9 @@ void __weak __init serial8250_early_out(struct uart_port *port, int offset, int
case UPIO_MEM32:
writel(value, port->membase + (offset << 2));
break;
+ case UPIO_MEM32BE:
+ iowrite32be(value, port->membase + (offset << 2));
+ break;
case UPIO_PORT:
outb(value, port->iobase + offset);
break;
--
2.1.0
