These apply to newly converted drivers, like serial8250/libahci/...
The examples were adapted from the regmap bindings document.
Signed-off-by: Kevin Cernekee <cernekee@xxxxxxxxx>
---
.../devicetree/bindings/common-properties.txt | 60 ++++++++++++++++++++++
1 file changed, 60 insertions(+)
create mode 100644 Documentation/devicetree/bindings/common-properties.txt
diff --git a/Documentation/devicetree/bindings/common-properties.txt b/Documentation/devicetree/bindings/common-properties.txt
new file mode 100644
index 0000000..21044a4
--- /dev/null
+++ b/Documentation/devicetree/bindings/common-properties.txt
@@ -0,0 +1,60 @@
+Common properties
+
+The ePAPR specification does not define any properties related to hardware
+byteswapping, but endianness issues show up frequently in porting Linux to
+different machine types. This document attempts to provide a consistent
+way of handling byteswapping across drivers.
+
+Optional properties:
+ - big-endian: Boolean; force big endian register accesses
+ unconditionally (e.g. ioread32be/iowrite32be). Use this if you
+ know the peripheral always needs to be accessed in BE mode.
+ - little-endian: Boolean; force little endian register accesses
+ unconditionally (e.g. readl/writel). Use this if you know the
+ peripheral always needs to be accessed in LE mode. This is the
+ default.
+ - native-endian: Boolean; always use register accesses matched to the
+ endianness of the kernel binary (e.g. LE vmlinux -> readl/writel,
+ BE vmlinux -> ioread32be/iowrite32be). In this case no byteswaps
+ will ever be performed. Use this if the hardware "self-adjusts"
+ register endianness based on the CPU's configured endianness.
+
+Note that regmap, in contrast, defaults to native-endian. But this
+document is targeted for existing drivers, most of which currently use
+readl/writel because they expect to be accessing PCI/PCIe devices rather
+than memory-mapped SoC peripherals. Since the readl/writel accessors
+perform a byteswap on BE systems, this means that the drivers in question
+are implicitly "little-endian".
+
+Examples:
+Scenario 1 : CPU in LE mode & device in LE mode.
+dev: dev@40031000 {
+ compatible = "name";
+ reg = <0x40031000 0x1000>;
+ ...
+ native-endian;
+};
+
+Scenario 2 : CPU in LE mode & device in BE mode.
+dev: dev@40031000 {
+ compatible = "name";
+ reg = <0x40031000 0x1000>;
+ ...
+ big-endian;
+};
+
+Scenario 3 : CPU in BE mode & device in BE mode.
+dev: dev@40031000 {
+ compatible = "name";
+ reg = <0x40031000 0x1000>;
+ ...
+ native-endian;
+};
+
+Scenario 4 : CPU in BE mode & device in LE mode.
+dev: dev@40031000 {
+ compatible = "name";
+ reg = <0x40031000 0x1000>;
+ ...
+ little-endian;
+};
--
2.1.0
