On Sunday 23 November 2014 18:40:35 Kevin Cernekee wrote: > V2->V3: > > - Omit the BMIPS updates that have already been accepted into Ralf's tree. > They are still needed, but not reposted. > > - Make USB endian swap options conditional on "if CPU_BIG_ENDIAN". > > - Remove board listing from Documentation/devicetree/bindings/mips/brcm/soc.txt > > - Remove legacy device autodetection and chip ID decoding. Legacy > boards/bootloaders will be supported by selecting a single DTB file > to compile into the kernel. > > - Refactor quirks code to match against DT "compatible" strings, not chip IDs. > > - Fix CPU1 boot (missing DT node) on 6329. > > - Remove @0 / addressing properties on non-reg nodes. > > - Remove bogus "brcm,bmips" bus registration. > > - Move UBUS peripherals onto a "simple-bus" and set DMA ranges for this > bus on bcm3384_zephyr. > > - Fix base addresses on 6328/6368 for "periph_intc@10000020". > > - Change the MIPS_L1_CACHE_SHIFT calculation so as to minimize the impact > on other builds (like bcm63xx). Looks nice to me overall, with the new way of handling the dtb passing, this seems much more flexible, and I guess it can be turned into an actual multiplatform build if there is ever a desire to do that. > Re: dma-ranges > > dma.c implements a minimal remapping scheme just for the current UBUS > peripherals. The remapping is global, and it isn't the same mapping > needed for PCI(e). A more comprehensive solution will be needed before > PCI support can be added. > > On chips OTHER than 3384, remapping is only required on PCI (not UBUS or > "rdb"). Notably, BCM7445, an ARM platform currently supported upstream, > doesn't require dma-ranges for non-PCI devices. > > I am hoping we can piggyback on top of the ARM dma-ranges code once it > is merged. This will allow for eliminating my dma.c. Sounds good. Arnd
