If SERIAL_8250 is compiled as a module, the platform specific setup for Loongson will be a module too, and it will not work very well. At least on Loongson 3 it will trigger a build failure, since loongson_sysconf is not exported to modules. Fix by making the platform specific serial code always built-in. Cc: stable@xxxxxxxxxxxxxxx Reported-by: Ralf Baechle <ralf@xxxxxxxxxxxxxx> Signed-off-by: Aaro Koskinen <aaro.koskinen@xxxxxx> --- RESEND: Sorry, I screwed up the Cc: list in the original. arch/mips/loongson/common/Makefile | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/arch/mips/loongson/common/Makefile b/arch/mips/loongson/common/Makefile index 0bb9cc9..d87e033 100644 --- a/arch/mips/loongson/common/Makefile +++ b/arch/mips/loongson/common/Makefile @@ -11,7 +11,8 @@ obj-$(CONFIG_PCI) += pci.o # Serial port support # obj-$(CONFIG_EARLY_PRINTK) += early_printk.o -obj-$(CONFIG_SERIAL_8250) += serial.o +loongson-serial-$(CONFIG_SERIAL_8250) := serial.o +obj-y += $(loongson-serial-m) $(loongson-serial-y) obj-$(CONFIG_LOONGSON_UART_BASE) += uart_base.o obj-$(CONFIG_LOONGSON_MC146818) += rtc.o -- 2.1.2
