The Global Interrupt Controller (GIC) present on certain MIPS systems
can be used to route external interrupts to individual VPEs and CPU
interrupt vectors. It also supports a timer and software-generated
interrupts.
Signed-off-by: Andrew Bresticker <abrestic@xxxxxxxxxxxx>
Acked-by: Arnd Bergmann <arnd@xxxxxxxx>
---
No changes from v4.
Changes from v3:
- removed CPU name from compatible string
- removed available-cpu-vectors, added reserved-cpu-vectors
- made reg property optional
Changes from v2:
- added third cell to specify local vs. shared
- added documentation for timer sub-node
- changed compatible string to include CPU version
Changes from v1:
- moved from mips/ to interrupt-controller/
- removed interrupts and interrupt-parent properties
- added available-cpu-vectors property
- dropped third cell in interrupt specifier
---
.../bindings/interrupt-controller/mips-gic.txt | 55 ++++++++++++++++++++++
.../dt-bindings/interrupt-controller/mips-gic.h | 9 ++++
2 files changed, 64 insertions(+)
create mode 100644 Documentation/devicetree/bindings/interrupt-controller/mips-gic.txt
create mode 100644 include/dt-bindings/interrupt-controller/mips-gic.h
diff --git a/Documentation/devicetree/bindings/interrupt-controller/mips-gic.txt b/Documentation/devicetree/bindings/interrupt-controller/mips-gic.txt
new file mode 100644
index 0000000..5a65478
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/mips-gic.txt
@@ -0,0 +1,55 @@
+MIPS Global Interrupt Controller (GIC)
+
+The MIPS GIC routes external interrupts to individual VPEs and IRQ pins.
+It also supports local (per-processor) interrupts and software-generated
+interrupts which can be used as IPIs. The GIC also includes a free-running
+global timer, per-CPU count/compare timers, and a watchdog.
+
+Required properties:
+- compatible : Should be "mti,gic".
+- interrupt-controller : Identifies the node as an interrupt controller
+- #interrupt-cells : Specifies the number of cells needed to encode an
+ interrupt specifier. Should be 3.
+ - The first cell is the type of interrupt, local or shared.
+ See <include/dt-bindings/interrupt-controller/mips-gic.h>.
+ - The second cell is the GIC interrupt number.
+ - The third cell encodes the interrupt flags.
+ See <include/dt-bindings/interrupt-controller/irq.h> for a list of valid
+ flags.
+
+Optional properties:
+- reg : Base address and length of the GIC registers. If not present,
+ the base address reported by the hardware GCR_GIC_BASE will be used.
+- mti,reserved-cpu-vectors : Specifies the list of CPU interrupt vectors
+ to which the GIC may not route interrupts. Valid values are 2 - 7.
+ This property is ignored if the CPU is started in EIC mode.
+
+Required properties for timer sub-node:
+- compatible : Should be "mti,gic-timer".
+- interrupts : Interrupt for the GIC local timer.
+- clock-frequency : Clock frequency at which the GIC timers operate.
+
+Example:
+
+ gic: interrupt-controller@1bdc0000 {
+ compatible = "mti,gic";
+ reg = <0x1bdc0000 0x20000>;
+
+ interrupt-controller;
+ #interrupt-cells = <3>;
+
+ mti,reserved-cpu-vectors = <7>;
+
+ timer {
+ compatible = "mti,gic-timer";
+ interrupts = <GIC_LOCAL 1 IRQ_TYPE_NONE>;
+ clock-frequency = <50000000>;
+ };
+ };
+
+ uart@18101400 {
+ ...
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_SHARED 24 IRQ_TYPE_LEVEL_HIGH>;
+ ...
+ };
diff --git a/include/dt-bindings/interrupt-controller/mips-gic.h b/include/dt-bindings/interrupt-controller/mips-gic.h
new file mode 100644
index 0000000..cf35a57
--- /dev/null
+++ b/include/dt-bindings/interrupt-controller/mips-gic.h
@@ -0,0 +1,9 @@
+#ifndef _DT_BINDINGS_INTERRUPT_CONTROLLER_MIPS_GIC_H
+#define _DT_BINDINGS_INTERRUPT_CONTROLLER_MIPS_GIC_H
+
+#include <dt-bindings/interrupt-controller/irq.h>
+
+#define GIC_SHARED 0
+#define GIC_LOCAL 1
+
+#endif
--
2.1.0.rc2.206.gedb03e5
