The width of HT-bus is only 40-bit, but Loongson-3 has 48-bit physical
address. This implies only node-0's memory is DMAable because high bits
(Node ID) will lost. Fortunately, by configuring address windows in
firmware, we can extract 2bit Node ID (bit 44~47, only bit 44~45 used
now) from Loongson-3's 48-bit address space and embed it into 40-bit
(bit 37~38). Every NUMA node can do DMA now (however, maximum memory of
each node is reduced to 2^37 = 128GB).
Signed-off-by: Huacai Chen <chenhc@xxxxxxxxxx>
---
.../mips/include/asm/mach-loongson/dma-coherence.h | 6 +++---
arch/mips/loongson/Kconfig | 5 +++++
arch/mips/loongson/common/dma-swiotlb.c | 14 ++++++++++++++
3 files changed, 22 insertions(+), 3 deletions(-)
diff --git a/arch/mips/include/asm/mach-loongson/dma-coherence.h b/arch/mips/include/asm/mach-loongson/dma-coherence.h
index 6a90275..a905341 100644
--- a/arch/mips/include/asm/mach-loongson/dma-coherence.h
+++ b/arch/mips/include/asm/mach-loongson/dma-coherence.h
@@ -23,7 +23,7 @@ static inline dma_addr_t plat_map_dma_mem(struct device *dev, void *addr,
size_t size)
{
#ifdef CONFIG_CPU_LOONGSON3
- return virt_to_phys(addr);
+ return phys_to_dma(dev, virt_to_phys(addr));
#else
return virt_to_phys(addr) | 0x80000000;
#endif
@@ -33,7 +33,7 @@ static inline dma_addr_t plat_map_dma_mem_page(struct device *dev,
struct page *page)
{
#ifdef CONFIG_CPU_LOONGSON3
- return page_to_phys(page);
+ return phys_to_dma(dev, page_to_phys(page));
#else
return page_to_phys(page) | 0x80000000;
#endif
@@ -43,7 +43,7 @@ static inline unsigned long plat_dma_addr_to_phys(struct device *dev,
dma_addr_t dma_addr)
{
#if defined(CONFIG_CPU_LOONGSON3) && defined(CONFIG_64BIT)
- return dma_addr;
+ return dma_to_phys(dev, dma_addr);
#elif defined(CONFIG_CPU_LOONGSON2F) && defined(CONFIG_64BIT)
return (dma_addr > 0x8fffffff) ? dma_addr : (dma_addr & 0x0fffffff);
#else
diff --git a/arch/mips/loongson/Kconfig b/arch/mips/loongson/Kconfig
index 1b91fc6..72f830ac 100644
--- a/arch/mips/loongson/Kconfig
+++ b/arch/mips/loongson/Kconfig
@@ -86,6 +86,7 @@ config LOONGSON_MACH3X
select LOONGSON_MC146818
select ZONE_DMA32
select LEFI_FIRMWARE_INTERFACE
+ select PHYS48_TO_HT40
help
Generic Loongson 3 family machines utilize the 3A/3B revision
of Loongson processor and RS780/SBX00 chipset.
@@ -131,6 +132,10 @@ config SWIOTLB
select NEED_SG_DMA_LENGTH
select NEED_DMA_MAP_STATE
+config PHYS48_TO_HT40
+ bool
+ default y if CPU_LOONGSON3
+
config LOONGSON_MC146818
bool
default n
diff --git a/arch/mips/loongson/common/dma-swiotlb.c b/arch/mips/loongson/common/dma-swiotlb.c
index c2be01f..2c6b989 100644
--- a/arch/mips/loongson/common/dma-swiotlb.c
+++ b/arch/mips/loongson/common/dma-swiotlb.c
@@ -105,11 +105,25 @@ static int loongson_dma_set_mask(struct device *dev, u64 mask)
dma_addr_t phys_to_dma(struct device *dev, phys_addr_t paddr)
{
+ long nid;
+#ifdef CONFIG_PHYS48_TO_HT40
+ /* We extract 2bit node id (bit 44~47, only bit 44~45 used now) from
+ * Loongson-3's 48bit address space and embed it into 40bit */
+ nid = (paddr >> 44) & 0x3;
+ paddr = ((nid << 44) ^ paddr) | (nid << 37);
+#endif
return paddr;
}
phys_addr_t dma_to_phys(struct device *dev, dma_addr_t daddr)
{
+ long nid;
+#ifdef CONFIG_PHYS48_TO_HT40
+ /* We extract 2bit node id (bit 44~47, only bit 44~45 used now) from
+ * Loongson-3's 48bit address space and embed it into 40bit */
+ nid = (daddr >> 37) & 0x3;
+ daddr = ((nid << 37) ^ daddr) | (nid << 44);
+#endif
return daddr;
}
--
1.7.7.3
