2014-10-18 19:30 GMT-07:00 Kevin Cernekee <cernekee@xxxxxxxxx>: > Remove incorrect "bcm963xx_uart" module name; add a list of known users; > tweak grammar/indentation/capitalization. > > Signed-off-by: Kevin Cernekee <cernekee@xxxxxxxxx> Acked-by: Florian Fainelli <f.fainelli@xxxxxxxxx> > --- > drivers/tty/serial/Kconfig | 16 +++++++++------- > 1 file changed, 9 insertions(+), 7 deletions(-) > > diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig > index 4a5c0c8..815b652 100644 > --- a/drivers/tty/serial/Kconfig > +++ b/drivers/tty/serial/Kconfig > @@ -1281,22 +1281,24 @@ config SERIAL_TIMBERDALE > Add support for UART controller on timberdale. > > config SERIAL_BCM63XX > - tristate "bcm63xx serial port support" > + tristate "Broadcom BCM63xx/BCM33xx UART support" > select SERIAL_CORE > depends on MIPS || ARM || COMPILE_TEST > help > - If you have a bcm63xx CPU, you can enable its onboard > - serial port by enabling this options. > + This enables the driver for the onchip UART core found on > + the following chipsets: > > - To compile this driver as a module, choose M here: the > - module will be called bcm963xx_uart. > + BCM33xx (cable modem) > + BCM63xx/BCM63xxx (DSL) > + BCM68xx (PON) > + BCM7xxx (STB) - DOCSIS console > > config SERIAL_BCM63XX_CONSOLE > - bool "Console on bcm63xx serial port" > + bool "Console on BCM63xx serial port" > depends on SERIAL_BCM63XX=y > select SERIAL_CORE_CONSOLE > help > - If you have enabled the serial port on the bcm63xx CPU > + If you have enabled the serial port on the BCM63xx CPU > you can make it the console by answering Y to this option. > > config SERIAL_GRLIB_GAISLER_APBUART > -- > 2.1.1 > -- Florian
