The Lantiq SoCs have a 2nd mips core called "voice mips macro core (vmmc)"
which is used to run the voice firmware. This driver allows us to register
a chunk of memory that the voice driver can later use for the 2nd core.
Signed-off-by: John Crispin <blogic@xxxxxxxxxxx>
---
arch/mips/lantiq/xway/Makefile | 2 ++
arch/mips/lantiq/xway/vmmc.c | 69 ++++++++++++++++++++++++++++++++++++++++
2 files changed, 71 insertions(+)
create mode 100644 arch/mips/lantiq/xway/vmmc.c
diff --git a/arch/mips/lantiq/xway/Makefile b/arch/mips/lantiq/xway/Makefile
index 087497d..a2edc53 100644
--- a/arch/mips/lantiq/xway/Makefile
+++ b/arch/mips/lantiq/xway/Makefile
@@ -1,3 +1,5 @@
obj-y := prom.o sysctrl.o clk.o reset.o dma.o gptu.o dcdc.o
+obj-y += vmmc.o
+
obj-$(CONFIG_XRX200_PHY_FW) += xrx200_phy_fw.o
diff --git a/arch/mips/lantiq/xway/vmmc.c b/arch/mips/lantiq/xway/vmmc.c
new file mode 100644
index 0000000..696cd57
--- /dev/null
+++ b/arch/mips/lantiq/xway/vmmc.c
@@ -0,0 +1,69 @@
+/*
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ * Copyright (C) 2012 John Crispin <blogic@xxxxxxxxxxx>
+ */
+
+#include <linux/module.h>
+#include <linux/of_platform.h>
+#include <linux/of_gpio.h>
+#include <linux/dma-mapping.h>
+
+#include <lantiq_soc.h>
+
+static unsigned int *cp1_base;
+
+unsigned int *ltq_get_cp1_base(void)
+{
+ if (!cp1_base)
+ panic("no cp1 base was set\n");
+
+ return cp1_base;
+}
+EXPORT_SYMBOL(ltq_get_cp1_base);
+
+static int vmmc_probe(struct platform_device *pdev)
+{
+#define CP1_SIZE (1 << 20)
+ int gpio_count;
+ dma_addr_t dma;
+
+ cp1_base =
+ (void *) CPHYSADDR(dma_alloc_coherent(NULL, CP1_SIZE,
+ &dma, GFP_ATOMIC));
+
+ gpio_count = of_gpio_count(pdev->dev.of_node);
+ while (gpio_count > 0) {
+ enum of_gpio_flags flags;
+ int gpio = of_get_gpio_flags(pdev->dev.of_node,
+ --gpio_count, &flags);
+ if (gpio_request(gpio, "vmmc-relay"))
+ continue;
+ dev_info(&pdev->dev, "requested GPIO %d\n", gpio);
+ gpio_direction_output(gpio,
+ (flags & OF_GPIO_ACTIVE_LOW) ? (0) : (1));
+ }
+
+ dev_info(&pdev->dev, "reserved %dMB at 0x%p", CP1_SIZE >> 20, cp1_base);
+
+ return 0;
+}
+
+static const struct of_device_id vmmc_match[] = {
+ { .compatible = "lantiq,vmmc-xway" },
+ {},
+};
+MODULE_DEVICE_TABLE(of, vmmc_match);
+
+static struct platform_driver vmmc_driver = {
+ .probe = vmmc_probe,
+ .driver = {
+ .name = "lantiq,vmmc",
+ .owner = THIS_MODULE,
+ .of_match_table = vmmc_match,
+ },
+};
+
+module_platform_driver(vmmc_driver);
--
1.7.10.4
