Hello, this third version of the series is basically just a rebase on top of linux-next 20141009. The first six patches are just cleanups that should be desirable on their own, and that should make easier to review the actual per-user clock patch. The seventh patch actually moves the per-clock data that was stored in struct clk to a new struct clk_core and adds references to it from both struct clk and struct clk_hw. struct clk is now ready to contain information that is specific to a given clk consumer. The eighth patch adds API for setting floor and ceiling constraints and stores that information on the per-user struct clk, which is iterable from struct clk_core. http://cgit.collabora.com/git/user/tomeu/linux.git/log/?h=per-user-clk-constraints-v3 Thanks, Tomeu Tomeu Vizoso (8): MIPS: Alchemy: Remove direct access to prepare_count field of struct clk clk: Remove unused function __clk_get_prepare_count clk: Don't try to use a struct clk* after it could have been freed clk: Don't expose __clk_get_accuracy clk: change clk_debugfs_add_file to take a struct clk_hw clk: Change clk_ops->determine_rate to return a clk_hw as the best parent clk: Make clk API return per-user struct clk instances clk: Add floor and ceiling constraints to clock rates Documentation/clk.txt | 2 +- arch/arm/mach-omap2/cclock3xxx_data.c | 108 +++-- arch/arm/mach-omap2/clock.h | 11 +- arch/arm/mach-omap2/clock_common_data.c | 5 +- arch/mips/alchemy/common/clock.c | 17 +- drivers/clk/at91/clk-programmable.c | 4 +- drivers/clk/bcm/clk-kona.c | 4 +- drivers/clk/clk-composite.c | 9 +- drivers/clk/clk.c | 748 ++++++++++++++++++++------------ drivers/clk/clk.h | 5 + drivers/clk/clkdev.c | 24 +- drivers/clk/hisilicon/clk-hi3620.c | 2 +- drivers/clk/qcom/clk-rcg.c | 20 +- drivers/clk/qcom/clk-rcg2.c | 28 +- drivers/clk/sunxi/clk-factors.c | 4 +- drivers/clk/sunxi/clk-sun6i-ar100.c | 4 +- include/linux/clk-private.h | 40 +- include/linux/clk-provider.h | 30 +- include/linux/clk.h | 18 + 19 files changed, 717 insertions(+), 366 deletions(-) -- 1.9.3
