There is no point building the drivers for the i2c related devices if
CONFIG_I2C is not enabled.
This also fixes a randconfig problem:
arch/mips/mti-sead3/sead3-pic32-i2c-drv.c: In function 'i2c_platform_probe':
arch/mips/mti-sead3/sead3-pic32-i2c-drv.c:345:2: error: implicit declaration of
function 'i2c_add_numbered_adapter' [-Werror=implicit-function-declaration]
ret = i2c_add_numbered_adapter(&priv->adap);
^
arch/mips/mti-sead3/sead3-pic32-i2c-drv.c: In function
'i2c_platform_remove':
arch/mips/mti-sead3/sead3-pic32-i2c-drv.c:361:2: error: implicit declaration
of function 'i2c_del_adapter' [-Werror=implicit-function-declaration]
i2c_del_adapter(&priv->adap);
Reviewed-by: Steven J. Hill <Steven.Hill@xxxxxxxxxx>
Signed-off-by: Markos Chandras <markos.chandras@xxxxxxxxxx>
---
arch/mips/mti-sead3/Makefile | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/arch/mips/mti-sead3/Makefile b/arch/mips/mti-sead3/Makefile
index 071786fa234b..a632b9cfe526 100644
--- a/arch/mips/mti-sead3/Makefile
+++ b/arch/mips/mti-sead3/Makefile
@@ -13,11 +13,11 @@ obj-y := sead3-lcd.o sead3-display.o sead3-init.o \
sead3-platform.o sead3-reset.o \
sead3-setup.o sead3-time.o
-obj-y += sead3-i2c-dev.o sead3-i2c.o \
- sead3-pic32-i2c-drv.o sead3-pic32-bus.o \
- leds-sead3.o sead3-leds.o
+obj-y += leds-sead3.o sead3-leds.o
obj-$(CONFIG_EARLY_PRINTK) += sead3-console.o
+obj-$(CONFIG_I2C) += sead3-i2c.o sead3-i2c-dev.o \
+ sead3-pic32-bus.o lsead3-pic32-i2c-drv.o
obj-$(CONFIG_USB_EHCI_HCD) += sead3-ehci.o
obj-$(CONFIG_OF) += sead3.dtb.o
--
2.1.2
