On Tue, Oct 07, 2014 at 06:28:09AM +0100, Guenter Roeck wrote: > Replace reference to pm_power_off (which is an implementation detail) > and replace it with a more generic description of the driver's functionality. > > Cc: Rob Herring <robh+dt@xxxxxxxxxx> > Cc: Pawel Moll <pawel.moll@xxxxxxx> > Cc: Mark Rutland <mark.rutland@xxxxxxx> > Signed-off-by: Guenter Roeck <linux@xxxxxxxxxxxx> > --- > Documentation/devicetree/bindings/power_supply/qnap-poweroff.txt | 4 ++-- > 1 file changed, 2 insertions(+), 2 deletions(-) > > diff --git a/Documentation/devicetree/bindings/power_supply/qnap-poweroff.txt b/Documentation/devicetree/bindings/power_supply/qnap-poweroff.txt > index af25e77..1e2260a 100644 > --- a/Documentation/devicetree/bindings/power_supply/qnap-poweroff.txt > +++ b/Documentation/devicetree/bindings/power_supply/qnap-poweroff.txt > @@ -3,8 +3,8 @@ > QNAP NAS devices have a microcontroller controlling the main power > supply. This microcontroller is connected to UART1 of the Kirkwood and > Orion5x SoCs. Sending the character 'A', at 19200 baud, tells the > -microcontroller to turn the power off. This driver adds a handler to > -pm_power_off which is called to turn the power off. > +microcontroller to turn the power off. This driver installs a handler > +to power off the system. I'd remove the last sentence -- the driver is also independent of the HW, and the description of how the power off works at the HW level is sufficient. With that: Acked-by: Mark Rutland <mark.rutland@xxxxxxx> Thanks, Mark.
