The generic plat_irq_dispatch provided in irq_cpu.c is sufficient for
dispatching interrupts on Malta in legacy and vectored interrupt modes.
Signed-off-by: Andrew Bresticker <abrestic@xxxxxxxxxxxx>
Reviewed-by: Qais Yousef <qais.yousef@xxxxxxxxxx>
Tested-by: Qais Yousef <qais.yousef@xxxxxxxxxx>
---
No changes from v1.
---
arch/mips/mti-malta/malta-int.c | 92 -----------------------------------------
1 file changed, 92 deletions(-)
diff --git a/arch/mips/mti-malta/malta-int.c b/arch/mips/mti-malta/malta-int.c
index c6b3548..bcab0b1 100644
--- a/arch/mips/mti-malta/malta-int.c
+++ b/arch/mips/mti-malta/malta-int.c
@@ -190,92 +190,6 @@ static irqreturn_t corehi_handler(int irq, void *dev_id)
return IRQ_HANDLED;
}
-static inline int clz(unsigned long x)
-{
- __asm__(
- " .set push \n"
- " .set mips32 \n"
- " clz %0, %1 \n"
- " .set pop \n"
- : "=r" (x)
- : "r" (x));
-
- return x;
-}
-
-/*
- * Version of ffs that only looks at bits 12..15.
- */
-static inline unsigned int irq_ffs(unsigned int pending)
-{
-#if defined(CONFIG_CPU_MIPS32) || defined(CONFIG_CPU_MIPS64)
- return -clz(pending) + 31 - CAUSEB_IP;
-#else
- unsigned int a0 = 7;
- unsigned int t0;
-
- t0 = pending & 0xf000;
- t0 = t0 < 1;
- t0 = t0 << 2;
- a0 = a0 - t0;
- pending = pending << t0;
-
- t0 = pending & 0xc000;
- t0 = t0 < 1;
- t0 = t0 << 1;
- a0 = a0 - t0;
- pending = pending << t0;
-
- t0 = pending & 0x8000;
- t0 = t0 < 1;
- /* t0 = t0 << 2; */
- a0 = a0 - t0;
- /* pending = pending << t0; */
-
- return a0;
-#endif
-}
-
-/*
- * IRQs on the Malta board look basically (barring software IRQs which we
- * don't use at all and all external interrupt sources are combined together
- * on hardware interrupt 0 (MIPS IRQ 2)) like:
- *
- * MIPS IRQ Source
- * -------- ------
- * 0 Software (ignored)
- * 1 Software (ignored)
- * 2 Combined hardware interrupt (hw0)
- * 3 Hardware (ignored)
- * 4 Hardware (ignored)
- * 5 Hardware (ignored)
- * 6 Hardware (ignored)
- * 7 R4k timer (what we use)
- *
- * We handle the IRQ according to _our_ priority which is:
- *
- * Highest ---- R4k Timer
- * Lowest ---- Combined hardware interrupt
- *
- * then we just return, if multiple IRQs are pending then we will just take
- * another exception, big deal.
- */
-
-asmlinkage void plat_irq_dispatch(void)
-{
- unsigned int pending = read_c0_cause() & read_c0_status() & ST0_IM;
- int irq;
-
- if (unlikely(!pending)) {
- spurious_interrupt();
- return;
- }
-
- irq = irq_ffs(pending);
-
- do_IRQ(MIPS_CPU_IRQ_BASE + irq);
-}
-
#ifdef CONFIG_MIPS_MT_SMP
#define MIPS_CPU_IPI_RESCHED_IRQ 0 /* SW int 0 for resched */
@@ -438,12 +352,6 @@ void __init arch_init_irq(void)
cpu_ipi_resched_irq = MSC01E_INT_SW0;
cpu_ipi_call_irq = MSC01E_INT_SW1;
} else {
- if (cpu_has_vint) {
- set_vi_handler (MIPS_CPU_IPI_RESCHED_IRQ,
- ipi_resched_dispatch);
- set_vi_handler (MIPS_CPU_IPI_CALL_IRQ,
- ipi_call_dispatch);
- }
cpu_ipi_resched_irq = MIPS_CPU_IRQ_BASE +
MIPS_CPU_IPI_RESCHED_IRQ;
cpu_ipi_call_irq = MIPS_CPU_IRQ_BASE +
--
2.1.0.rc2.206.gedb03e5
