It's a duplicate of sead3-platform.c and is not even compiled.
Remove it before we start fixing up IRQ assignments.
Signed-off-by: Andrew Bresticker <abrestic@xxxxxxxxxxxx>
---
arch/mips/mti-sead3/sead3-serial.c | 45 --------------------------------------
1 file changed, 45 deletions(-)
delete mode 100644 arch/mips/mti-sead3/sead3-serial.c
diff --git a/arch/mips/mti-sead3/sead3-serial.c b/arch/mips/mti-sead3/sead3-serial.c
deleted file mode 100644
index bc52705..0000000
--- a/arch/mips/mti-sead3/sead3-serial.c
+++ /dev/null
@@ -1,45 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2012 MIPS Technologies, Inc. All rights reserved.
- */
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/serial_8250.h>
-
-#define UART(base, int) \
-{ \
- .mapbase = base, \
- .irq = int, \
- .uartclk = 14745600, \
- .iotype = UPIO_MEM32, \
- .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP, \
- .regshift = 2, \
-}
-
-static struct plat_serial8250_port uart8250_data[] = {
- UART(0x1f000900, MIPS_CPU_IRQ_BASE + 4), /* ttyS0 = USB */
- UART(0x1f000800, MIPS_CPU_IRQ_BASE + 4), /* ttyS1 = RS232 */
- { },
-};
-
-static struct platform_device uart8250_device = {
- .name = "serial8250",
- .id = PLAT8250_DEV_PLATFORM,
- .dev = {
- .platform_data = uart8250_data,
- },
-};
-
-static int __init uart8250_init(void)
-{
- return platform_device_register(&uart8250_device);
-}
-
-module_init(uart8250_init);
-
-MODULE_AUTHOR("Chris Dearman <chris@xxxxxxxx>");
-MODULE_LICENSE("GPL");
-MODULE_DESCRIPTION("8250 UART probe driver for the SEAD-3 platform");
--
2.1.0.rc2.206.gedb03e5
