[PATCH V2] MIPS: BCM47XX: Make ssb init NVRAM instead of bcm47xx polling it

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



This makes NVRAM code less bcm47xx/ssb specific allowing it to become a
standalone driver in the future. A similar patch for bcma will follow
when it's ready.

Signed-off-by: Rafał Miłecki <zajec5@xxxxxxxxx>
---
This patch depends on
[PATCH] MIPS: BCM47XX: Get rid of calls to KSEG1ADDR in nvram

V2: Typo in commit message s/bcma/ssb/
---
 arch/mips/bcm47xx/nvram.c     | 30 +++++++++---------------------
 drivers/ssb/driver_mipscore.c | 18 +++++++++++++++++-
 2 files changed, 26 insertions(+), 22 deletions(-)

diff --git a/arch/mips/bcm47xx/nvram.c b/arch/mips/bcm47xx/nvram.c
index 2f0a646..8ea2116 100644
--- a/arch/mips/bcm47xx/nvram.c
+++ b/arch/mips/bcm47xx/nvram.c
@@ -98,7 +98,14 @@ found:
 	return 0;
 }
 
-static int bcm47xx_nvram_init_from_mem(u32 base, u32 lim)
+/*
+ * On bcm47xx we need access to the NVRAM very early, so we can't use mtd
+ * subsystem to access flash. We can't even use platform device / driver to
+ * store memory offset.
+ * To handle this we provide following symbol. It's supposed to be called as
+ * soon as we get info about flash device, before any NVRAM entry is needed.
+ */
+int bcm47xx_nvram_init_from_mem(u32 base, u32 lim)
 {
 	void __iomem *iobase;
 
@@ -109,25 +116,6 @@ static int bcm47xx_nvram_init_from_mem(u32 base, u32 lim)
 	return nvram_find_and_copy(iobase, lim);
 }
 
-#ifdef CONFIG_BCM47XX_SSB
-static int nvram_init_ssb(void)
-{
-	struct ssb_mipscore *mcore = &bcm47xx_bus.ssb.mipscore;
-	u32 base;
-	u32 lim;
-
-	if (mcore->pflash.present) {
-		base = mcore->pflash.window;
-		lim = mcore->pflash.window_size;
-	} else {
-		pr_err("Couldn't find supported flash memory\n");
-		return -ENXIO;
-	}
-
-	return bcm47xx_nvram_init_from_mem(base, lim);
-}
-#endif
-
 #ifdef CONFIG_BCM47XX_BCMA
 static int nvram_init_bcma(void)
 {
@@ -163,7 +151,7 @@ static int nvram_init(void)
 	switch (bcm47xx_bus_type) {
 #ifdef CONFIG_BCM47XX_SSB
 	case BCM47XX_BUS_TYPE_SSB:
-		return nvram_init_ssb();
+		break;
 #endif
 #ifdef CONFIG_BCM47XX_BCMA
 	case BCM47XX_BUS_TYPE_BCMA:
diff --git a/drivers/ssb/driver_mipscore.c b/drivers/ssb/driver_mipscore.c
index 0907706..c51802f 100644
--- a/drivers/ssb/driver_mipscore.c
+++ b/drivers/ssb/driver_mipscore.c
@@ -207,9 +207,17 @@ static void ssb_mips_serial_init(struct ssb_mipscore *mcore)
 		mcore->nr_serial_ports = 0;
 }
 
+/* bcm47xx_nvram isn't a separated driver yet and doesn't have its own header.
+ * Once we make it a standalone driver, remove following extern!
+ */
+#ifdef CONFIG_BCM47XX
+extern int bcm47xx_nvram_init_from_mem(u32 base, u32 lim);
+#endif
+
 static void ssb_mips_flash_detect(struct ssb_mipscore *mcore)
 {
 	struct ssb_bus *bus = mcore->dev->bus;
+	struct ssb_sflash *sflash = &mcore->sflash;
 	struct ssb_pflash *pflash = &mcore->pflash;
 
 	/* When there is no chipcommon on the bus there is 4MB flash */
@@ -242,7 +250,15 @@ static void ssb_mips_flash_detect(struct ssb_mipscore *mcore)
 	}
 
 ssb_pflash:
-	if (pflash->present) {
+	if (sflash->present) {
+#ifdef CONFIG_BCM47XX
+		bcm47xx_nvram_init_from_mem(sflash->window, sflash->size);
+#endif
+	} else if (pflash->present) {
+#ifdef CONFIG_BCM47XX
+		bcm47xx_nvram_init_from_mem(pflash->window, pflash->window_size);
+#endif
+
 		ssb_pflash_data.width = pflash->buswidth;
 		ssb_pflash_resource.start = pflash->window;
 		ssb_pflash_resource.end = pflash->window + pflash->window_size;
-- 
1.8.4.5



[Index of Archives]     [Linux MIPS Home]     [LKML Archive]     [Linux ARM Kernel]     [Linux ARM]     [Linux]     [Git]     [Yosemite News]     [Linux SCSI]     [Linux Hams]

  Powered by Linux