The Global Interrupt Controller (GIC) present on certain MIPS systems
can be used to route external interrupts to individual VPEs and CPU
interrupt vectors. It also supports a timer and software-generated
interrupts.
Signed-off-by: Andrew Bresticker <abrestic@xxxxxxxxxxxx>
---
Documentation/devicetree/bindings/mips/gic.txt | 50 ++++++++++++++++++++++++++
1 file changed, 50 insertions(+)
create mode 100644 Documentation/devicetree/bindings/mips/gic.txt
diff --git a/Documentation/devicetree/bindings/mips/gic.txt b/Documentation/devicetree/bindings/mips/gic.txt
new file mode 100644
index 0000000..725f1ef
--- /dev/null
+++ b/Documentation/devicetree/bindings/mips/gic.txt
@@ -0,0 +1,50 @@
+MIPS Global Interrupt Controller (GIC)
+
+The MIPS GIC routes external interrupts to individual VPEs and IRQ pins.
+It also supports a timer and software-generated interrupts which can be
+used as IPIs.
+
+Required properties:
+- compatible : Should be "mti,global-interrupt-controller"
+- reg : Base address and length of the GIC registers.
+- interrupts : Core interrupts to which the GIC may route external interrupts.
+- interrupt-controller : Identifies the node as an interrupt controller
+- #interrupt-cells : Specifies the number of cells needed to encode an
+ interrupt specifier. Should be 3.
+ - The first cell is the GIC interrupt number.
+ - The second cell encodes the interrupt flags.
+ See <include/dt-bindings/interrupt-controller/irq.h> for a list of valid
+ flags.
+ - The optional third cell indicates which CPU interrupt vector the GIC
+ interrupt should be routed to. It is a 0-based index into the list of
+ GIC-to-CPU interrupts specified in the "interrupts" property described
+ above. For example, a '2' in this cell will route the interrupt to the
+ 3rd core interrupt listed in 'interrupts'. If omitted, the interrupt will
+ be routed to the 1st core interrupt.
+
+Example:
+
+ cpu_intc: interrupt-controller@0 {
+ compatible = "mti,cpu-interrupt-controller";
+
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+
+ gic: interrupt-controller@1bdc0000 {
+ compatible = "mti,global-interrupt-controller";
+ reg = <0x1bdc0000 0x20000>;
+
+ interrupt-controller;
+ #interrupt-cells = <3>;
+
+ interrupt-parent = <&cpu_intc>;
+ interrupts = <3>, <4>;
+ };
+
+ uart@18101400 {
+ ...
+ interrupt-parent = <&gic>;
+ interrupts = <24 IRQ_TYPE_LEVEL_HIGH 0>;
+ ...
+ };
--
2.1.0.rc2.206.gedb03e5
