Move the SEAD-3 device-tree to arch/mips/boot/dts/mti/ and update the
Makefiles accordingly. Since SEAD-3 requires the device-tree to be
built into the kernel, select BUILTIN_DTB when building for SEAD-3.
Signed-off-by: Andrew Bresticker <abrestic@xxxxxxxxxxxx>
---
arch/mips/Kconfig | 1 +
arch/mips/boot/dts/Makefile | 1 +
arch/mips/boot/dts/mti/Makefile | 1 +
arch/mips/{mti-sead3 => boot/dts/mti}/sead3.dts | 0
arch/mips/mti-sead3/Makefile | 4 ----
5 files changed, 3 insertions(+), 4 deletions(-)
create mode 100644 arch/mips/boot/dts/mti/Makefile
rename arch/mips/{mti-sead3 => boot/dts/mti}/sead3.dts (100%)
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index dbfcf35..a72c7c9 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -353,6 +353,7 @@ config MIPS_SEAD3
bool "MIPS SEAD3 board"
select BOOT_ELF32
select BOOT_RAW
+ select BUILTIN_DTB
select CEVT_R4K
select CSRC_R4K
select CSRC_GIC
diff --git a/arch/mips/boot/dts/Makefile b/arch/mips/boot/dts/Makefile
index 0f16e92..e32cc0f 100644
--- a/arch/mips/boot/dts/Makefile
+++ b/arch/mips/boot/dts/Makefile
@@ -1,5 +1,6 @@
include arch/mips/boot/dts/cavium-octeon/Makefile
include arch/mips/boot/dts/lantiq/Makefile
+include arch/mips/boot/dts/mti/Makefile
obj-y += $(patsubst %.dtb, %.dtb.o, $(dtb-y))
diff --git a/arch/mips/boot/dts/mti/Makefile b/arch/mips/boot/dts/mti/Makefile
new file mode 100644
index 0000000..913fac9
--- /dev/null
+++ b/arch/mips/boot/dts/mti/Makefile
@@ -0,0 +1 @@
+dtb-$(CONFIG_MIPS_SEAD3) += mti/sead3.dtb
diff --git a/arch/mips/mti-sead3/sead3.dts b/arch/mips/boot/dts/mti/sead3.dts
similarity index 100%
rename from arch/mips/mti-sead3/sead3.dts
rename to arch/mips/boot/dts/mti/sead3.dts
diff --git a/arch/mips/mti-sead3/Makefile b/arch/mips/mti-sead3/Makefile
index 071786f..febf433 100644
--- a/arch/mips/mti-sead3/Makefile
+++ b/arch/mips/mti-sead3/Makefile
@@ -19,9 +19,5 @@ obj-y += sead3-i2c-dev.o sead3-i2c.o \
obj-$(CONFIG_EARLY_PRINTK) += sead3-console.o
obj-$(CONFIG_USB_EHCI_HCD) += sead3-ehci.o
-obj-$(CONFIG_OF) += sead3.dtb.o
CFLAGS_sead3-setup.o = -I$(src)/../../../scripts/dtc/libfdt
-
-$(obj)/%.dtb: $(obj)/%.dts
- $(call if_changed,dtc)
--
2.1.0.rc2.206.gedb03e5
