Re: [PATCH 1/3] PCI/MSI: Add pci_enable_msi_partial()

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Mon, Jul 07, 2014 at 01:40:48PM -0600, Bjorn Helgaas wrote:
> >> Can you quantify the benefit of this?  Can't a device already use
> >> MSI-X to request exactly the number of vectors it can use?  (I know
> >
> > A Intel AHCI chipset requires 16 vectors written to MME while advertises
> > (via AHCI registers) and uses only 6. Even attempt to init 8 vectors results
> > in device's fallback to 1 (!).
> 
> Is the fact that it uses only 6 vectors documented in the public spec?

Yes, it is documented in ICH specs.

> Is this a chipset erratum?  Are there newer versions of the chipset
> that fix this, e.g., by requesting 8 vectors and using 6, or by also
> supporting MSI-X?

No, this is not an erratum. The value of 8 vectors is reserved and could
cause undefined results if used.

> I know this conserves vector numbers.  What does that mean in real
> user-visible terms?  Are there systems that won't boot because of this
> issue, and this patch fixes them?  Does it enable bigger
> configurations, e.g., more I/O devices, than before?

Visibly, it ceases logging messages ('ahci 0000:00:1f.2: irq 107 for
MSI/MSI-X') for IRQs that are not shown in /proc/interrupts later.

No, it does not enable/fix any existing hardware issue I am aware of.
It just saves a couple of interrupt vectors, as Michael put it (10/16
to be precise). However, interrupt vectors space is pretty much scarce
resource on x86 and a risk of exhausting the vectors (and introducing
quota i.e) has already been raised AFAIR.

> Do you know how Windows handles this?  Does it have a similar interface?

Have no clue, TBH. Can try to investigate if you see it helpful.

> As you can tell, I'm a little skeptical about this.  It's a fairly big
> change, it affects the arch interface, it seems to be targeted for
> only a single chipset (though it's widely used), and we already
> support a standard solution (MSI-X, reducing the number of vectors
> requested, or even operating with 1 vector).

I also do not like the fact the arch interface is getting complicated,
so I happily leave it to your judgement ;) Well, it is low-level and
hidden from drivers at least.

Thanks!

> Bjorn

-- 
Regards,
Alexander Gordeev
agordeev@xxxxxxxxxx


[Index of Archives]     [Linux MIPS Home]     [LKML Archive]     [Linux ARM Kernel]     [Linux ARM]     [Linux]     [Git]     [Yosemite News]     [Linux SCSI]     [Linux Hams]

  Powered by Linux