On Wed, Apr 09, 2014 at 11:02:10PM -0400, Joshua Kinard wrote: > Odd, I thought R10K systems were locked to booting 64-bit kernels only. At > least the Octane was when it was bootable. Not sure about IP27. > > Maybe that's another one of ARCS' ingenious features... No; IP27's address map is huge; a single node can take 2GB RAM. A full blown 512 CPU system could have 0.5TB memory. Your homework for today: try to use all that efficiently with highmem ;-) Octane is essentially a specialized, single-node IP27. It also can take more memory than addressable in a 32 bit kernel which assumes that all memory is visible in CKSEG0, all I/O in CKSEG1 - or you need to ioremap to CKSEG2/3. So 32 bit kernels just don't cut it on Octane either. Similarly 32 bit kernels don't cut it on other systems such as Sibyte, SGI O2, Octane. They may be possible for some configurations but that that's either too rarely a useful choice or too inefficient. Let's say 32 bit is slowly running out of juice :-) > >> Are you configuring for IP22 (Indy, Indigo2 R4x00), or IP28 (R10000)? Note, > >> IP26 (R8000) is not supported in Linux. I think OpenBSD got it working, though. > > > > Wish I'd have a box .... > > They do pop up on eBay from time-to-time. UPS destroyed the case mine came > in, though. I've got it in a closet, with duct tape holding the teal skins > on. It does boot to the PROM, but the RTC is probably dead by now. The common problem. You can cut it open with a dremel or similar tool, disconect the internal battery and connect an external battery instead. There are howtos for this on the web. I'm also tired of reprogramming the MAC address again when I use my Indy so I should do this myself ... Ralf
