I think, I've got it... 05.04.2014, 16:48, "kr kr" <kr-jiffy@xxxxxxxxx>: > Hello, > > I've been trying to re-flash mips malta 5kc board (the real board, not quemu) with a yamon image, using Abatron bdi 2000. No success yet. > JP1 jumper (MFWR) on the board is closed, S5 switch is set to: 1 - "open", 2 - "closed" (BE mode), 3 - "open", 4 - "open". On board display shows "Power on". > > From the user manual for Malta board: > "Note: Address 1FC0.0010 is “special”, in the sense that when the software read this address it is overridden and does NOT decode to an address in Flash, but rather to register address REVISION. This is > done to ensure future compatibility - all MIPS Technologies boards will be able to identify their hardware environment and configure themselves accordingly. Reads from address 1E00.0010 will decode to an > address in Flash." have just had a closer look to yamon's __reset_vector function.
