---
V2: Drop pr_debug for devices we don't need workarounds for. It was too
load and not useful at all.
---
arch/mips/bcm47xx/Makefile | 2 +-
arch/mips/bcm47xx/bcm47xx_private.h | 3 +++
arch/mips/bcm47xx/setup.c | 1 +
arch/mips/bcm47xx/workarounds.c | 25 +++++++++++++++++++++++++
4 files changed, 30 insertions(+), 1 deletion(-)
create mode 100644 arch/mips/bcm47xx/workarounds.c
diff --git a/arch/mips/bcm47xx/Makefile b/arch/mips/bcm47xx/Makefile
index 4688b6a..d58c51b 100644
--- a/arch/mips/bcm47xx/Makefile
+++ b/arch/mips/bcm47xx/Makefile
@@ -4,4 +4,4 @@
#
obj-y += irq.o nvram.o prom.o serial.o setup.o time.o sprom.o
-obj-y += board.o buttons.o leds.o
+obj-y += board.o buttons.o leds.o workarounds.o
diff --git a/arch/mips/bcm47xx/bcm47xx_private.h b/arch/mips/bcm47xx/bcm47xx_private.h
index 5c94ace..0194c3b 100644
--- a/arch/mips/bcm47xx/bcm47xx_private.h
+++ b/arch/mips/bcm47xx/bcm47xx_private.h
@@ -9,4 +9,7 @@ int __init bcm47xx_buttons_register(void);
/* leds.c */
void __init bcm47xx_leds_register(void);
+/* workarounds.c */
+void __init bcm47xx_workarounds(void);
+
#endif
diff --git a/arch/mips/bcm47xx/setup.c b/arch/mips/bcm47xx/setup.c
index 12d77e9..fdd9692 100644
--- a/arch/mips/bcm47xx/setup.c
+++ b/arch/mips/bcm47xx/setup.c
@@ -273,6 +273,7 @@ static int __init bcm47xx_register_bus_complete(void)
}
bcm47xx_buttons_register();
bcm47xx_leds_register();
+ bcm47xx_workarounds();
return 0;
}
diff --git a/arch/mips/bcm47xx/workarounds.c b/arch/mips/bcm47xx/workarounds.c
new file mode 100644
index 0000000..24b850c
--- /dev/null
+++ b/arch/mips/bcm47xx/workarounds.c
@@ -0,0 +1,25 @@
+#include "bcm47xx_private.h"
+
+#include <linux/gpio.h>
+#include <bcm47xx_board.h>
+#include <bcm47xx.h>
+
+static void __init bcm47xx_workarounds_netgear_wnr3500l(void)
+{
+ /* Set GPIO 12 to 1 to pass power to the USB port */
+ gpio_set_value(12, 1);
+}
+
+void __init bcm47xx_workarounds(void)
+{
+ enum bcm47xx_board board = bcm47xx_board_get();
+
+ switch (board) {
+ case BCM47XX_BOARD_NETGEAR_WNR3500L:
+ bcm47xx_workarounds_netgear_wnr3500l();
+ break;
+ default:
+ /* No workaround(s) needed */
+ break;
+ }
+}
--
1.8.4.5
