On Thu, Jan 09, 2014 at 06:25:02PM +0800, Huacai Chen wrote:
> On Thu, Jan 9, 2014 at 6:58 AM, Aurelien Jarno <aurelien@xxxxxxxxxxx> wrote:
>
> > On Wed, Jan 08, 2014 at 10:44:21AM +0800, Huacai Chen wrote:
> > > Loongson family machines use Hyper-Transport bus for inter-core
> > > connection and device connection. The PCI bus is a subordinate
> > > linked at HT1.
> > >
> > > With LEFI firmware interface, We don't need fixup for PCI irq routing
> > > (except providing a VBIOS of the integrated GPU).
> > >
> > > Signed-off-by: Huacai Chen <chenhc@xxxxxxxxxx>
> > > Signed-off-by: Hongliang Tao <taohl@xxxxxxxxxx>
> > > Signed-off-by: Hua Yan <yanh@xxxxxxxxxx>
> > > ---
> > > arch/mips/include/asm/mach-loongson/loongson.h | 7 ++
> > > arch/mips/include/asm/mach-loongson/pci.h | 5 +
> > > arch/mips/pci/Makefile | 1 +
> > > arch/mips/pci/fixup-loongson3.c | 70 ++++++++++++++++
> > > arch/mips/pci/ops-loongson3.c | 101
> > ++++++++++++++++++++++++
> > > 5 files changed, 184 insertions(+), 0 deletions(-)
> > > create mode 100644 arch/mips/pci/fixup-loongson3.c
> > > create mode 100644 arch/mips/pci/ops-loongson3.c
> > >
> > > diff --git a/arch/mips/include/asm/mach-loongson/loongson.h
> > b/arch/mips/include/asm/mach-loongson/loongson.h
> > > index 5913ea0..f0367ff 100644
> > > --- a/arch/mips/include/asm/mach-loongson/loongson.h
> > > +++ b/arch/mips/include/asm/mach-loongson/loongson.h
> > > @@ -15,6 +15,7 @@
> > > #include <linux/init.h>
> > > #include <linux/irq.h>
> > > #include <linux/kconfig.h>
> > > +#include <boot_param.h>
> > >
> > > /* loongson internal northbridge initialization */
> > > extern void bonito_irq_init(void);
> > > @@ -101,7 +102,13 @@ static inline void do_perfcnt_IRQ(void)
> > > #define LOONGSON_PCICFG_BASE 0x1fe80000
> > > #define LOONGSON_PCICFG_SIZE 0x00000800 /* 2K */
> > > #define LOONGSON_PCICFG_TOP
> > (LOONGSON_PCICFG_BASE+LOONGSON_PCICFG_SIZE-1)
> > > +
> > > +#if defined(CONFIG_HT_PCI)
> > > +#define LOONGSON_PCIIO_BASE loongson_sysconf.pci_io_base
> > > +#else
> > > #define LOONGSON_PCIIO_BASE 0x1fd00000
> >
> > If CONFIG_HT_PCI, it will use address 0x1fd00000. Does it have a chance
> > to work on Loongson 3?
> >
> > > +#endif
> > > +
> > > #define LOONGSON_PCIIO_SIZE 0x00100000 /* 1M */
> > > #define LOONGSON_PCIIO_TOP (LOONGSON_PCIIO_BASE+LOONGSON_PCIIO_SIZE-1)
> > >
> > > diff --git a/arch/mips/include/asm/mach-loongson/pci.h
> > b/arch/mips/include/asm/mach-loongson/pci.h
> > > index bc99dab..1212774 100644
> > > --- a/arch/mips/include/asm/mach-loongson/pci.h
> > > +++ b/arch/mips/include/asm/mach-loongson/pci.h
> > > @@ -40,8 +40,13 @@ extern struct pci_ops loongson_pci_ops;
> > > #else /* loongson2f/32bit & loongson2e */
> > >
> > > /* this pci memory space is mapped by pcimap in pci.c */
> > > +#ifdef CONFIG_CPU_LOONGSON3
> > > +#define LOONGSON_PCI_MEM_START 0x40000000UL
> > > +#define LOONGSON_PCI_MEM_END 0x7effffffUL
> > > +#else
> > > #define LOONGSON_PCI_MEM_START LOONGSON_PCILO1_BASE
> > > #define LOONGSON_PCI_MEM_END (LOONGSON_PCILO1_BASE + 0x04000000 * 2)
> > > +#endif
> > > /* this is an offset from mips_io_port_base */
> > > #define LOONGSON_PCI_IO_START 0x00004000UL
> > >
> > > diff --git a/arch/mips/pci/Makefile b/arch/mips/pci/Makefile
> > > index 719e455..5475859 100644
> > > --- a/arch/mips/pci/Makefile
> > > +++ b/arch/mips/pci/Makefile
> > > @@ -29,6 +29,7 @@ obj-$(CONFIG_LASAT) += pci-lasat.o
> > > obj-$(CONFIG_MIPS_COBALT) += fixup-cobalt.o
> > > obj-$(CONFIG_LEMOTE_FULOONG2E) += fixup-fuloong2e.o
> > ops-loongson2.o
> > > obj-$(CONFIG_LEMOTE_MACH2F) += fixup-lemote2f.o ops-loongson2.o
> > > +obj-$(CONFIG_LEMOTE_MACH3A) += fixup-loongson3.o ops-loongson3.o
> > > obj-$(CONFIG_MIPS_MALTA) += fixup-malta.o pci-malta.o
> > > obj-$(CONFIG_PMC_MSP7120_GW) += fixup-pmcmsp.o ops-pmcmsp.o
> > > obj-$(CONFIG_PMC_MSP7120_EVAL) += fixup-pmcmsp.o ops-pmcmsp.o
> > > diff --git a/arch/mips/pci/fixup-loongson3.c
> > b/arch/mips/pci/fixup-loongson3.c
> > > new file mode 100644
> > > index 0000000..4a8477d
> > > --- /dev/null
> > > +++ b/arch/mips/pci/fixup-loongson3.c
> > > @@ -0,0 +1,70 @@
> > > +/*
> > > + * fixup-loongson3.c
> > > + *
> > > + * Copyright (C) 2012 Lemote, Inc.
> > > + * Author: Xiang Yu, xiangy@xxxxxxxxxx
> > > + * Chen Huacai, chenhc@xxxxxxxxxx
> > > + *
> > > + * This program is free software; you can redistribute it and/or
> > modify it
> > > + * under the terms of the GNU General Public License as published by
> > the
> > > + * Free Software Foundation; either version 2 of the License, or (at
> > your
> > > + * option) any later version.
> > > + *
> > > + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR
> > IMPLIED
> > > + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
> > WARRANTIES OF
> > > + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
> > IN
> > > + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT,
> > INDIRECT,
> > > + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
> > BUT
> > > + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
> > LOSS OF
> > > + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
> > AND ON
> > > + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
> > TORT
> > > + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
> > USE OF
> > > + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
> > > + *
> > > + * You should have received a copy of the GNU General Public License
> > along
> > > + * with this program; if not, write to the Free Software Foundation,
> > Inc.,
> > > + * 675 Mass Ave, Cambridge, MA 02139, USA.
> >
> > checkpatch.pl reports that the address is wrong, and it is correct. As
> > suggested the best option is to just remove the three lines above.
> >
> > > + *
> > > + */
> > > +
> > > +#include <linux/pci.h>
> > > +#include <boot_param.h>
> > > +
> > > +static void print_fixup_info(const struct pci_dev *pdev)
> > > +{
> > > + dev_info(&pdev->dev, "Device %x:%x, irq %d\n",
> > > + pdev->vendor, pdev->device, pdev->irq);
> > > +}
> > > +
> > > +int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
> > > +{
> > > + print_fixup_info(dev);
> > > + return dev->irq;
> > > +}
> > > +
> > > +static void pci_fixup_radeon(struct pci_dev *pdev)
> > > +{
> > > + if (pdev->resource[PCI_ROM_RESOURCE].start)
> > > + return;
> > > +
> > > + if (!loongson_sysconf.vgabios_addr)
> > > + return;
> > > +
> > > + pdev->resource[PCI_ROM_RESOURCE].start =
> > > + loongson_sysconf.vgabios_addr;
> > > + pdev->resource[PCI_ROM_RESOURCE].end =
> > > + loongson_sysconf.vgabios_addr + 256*1024 - 1;
> > > + pdev->resource[PCI_ROM_RESOURCE].flags |= IORESOURCE_ROM_COPY;
> > > +
> > > + dev_info(&pdev->dev, "BAR %d: assigned %pR for Radeon ROM\n",
> > > + PCI_ROM_RESOURCE,
> > &pdev->resource[PCI_ROM_RESOURCE]);
> > > +}
> > > +
> > > +DECLARE_PCI_FIXUP_CLASS_FINAL(PCI_VENDOR_ID_ATI, PCI_ANY_ID,
> > > + PCI_CLASS_DISPLAY_VGA, 8,
> > pci_fixup_radeon);
> > > +
> > > +/* Do platform specific device initialization at pci_enable_device()
> > time */
> > > +int pcibios_plat_dev_init(struct pci_dev *dev)
> > > +{
> > > + return 0;
> > > +}
> > > diff --git a/arch/mips/pci/ops-loongson3.c
> > b/arch/mips/pci/ops-loongson3.c
> > > new file mode 100644
> > > index 0000000..077eafa
> > > --- /dev/null
> > > +++ b/arch/mips/pci/ops-loongson3.c
> > > @@ -0,0 +1,101 @@
> > > +#include <linux/types.h>
> > > +#include <linux/pci.h>
> > > +#include <linux/kernel.h>
> > > +
> > > +#include <asm/mips-boards/bonito64.h>
> > > +
> > > +#include <loongson.h>
> > > +
> > > +#define PCI_ACCESS_READ 0
> > > +#define PCI_ACCESS_WRITE 1
> > > +
> > > +#define HT1LO_PCICFG_BASE 0x1a000000
> > > +#define HT1LO_PCICFG_BASE_TP1 0x1b000000
> > > +
> > > +static int loongson3_pci_config_access(unsigned char access_type,
> > > + struct pci_bus *bus, unsigned int devfn,
> > > + int where, u32 *data)
> > > +{
> > > + unsigned char busnum = bus->number;
> > > + u_int64_t addr, type;
> > > + void *addrp;
> > > + int device = PCI_SLOT(devfn);
> > > + int function = PCI_FUNC(devfn);
> > > + int reg = where & ~3;
> > > +
> > > + addr = (busnum << 16) | (device << 11) | (function << 8) | reg;
> > > + if (busnum == 0) {
> > > + if (device > 31)
> > > + return PCIBIOS_DEVICE_NOT_FOUND;
> > > + addrp = (void *)(TO_UNCAC(HT1LO_PCICFG_BASE) | (addr &
> > 0xffff));
> > > + type = 0;
> > > +
> > > + } else {
> > > + addrp = (void *)(TO_UNCAC(HT1LO_PCICFG_BASE_TP1) | (addr));
> > > + type = 0x10000;
> > > + }
> > > +
> > > + if (access_type == PCI_ACCESS_WRITE)
> > > + writel(cpu_to_le32(*data), addrp);
> >
> > writel already includes the call to cpu_to_le32, so it can be written
> > directly as:
> >
> > writel(*data) addrp);
> >
> > As cpu_to_le32 is a no-op on little endian, both work, but it is not
> > correct to use cpu_to_le32 here.
> >
> > > + else {
> > > + *data = le32_to_cpu(readl(addrp));
> >
> >
> > Same here, this should be written as :
> >
> > *data = readl(addrp);
> >
> But why arch/mips/pci/ops-loongson2.c and arch/mips/pci/ops-bonito64.c use
> le32_to_cpu(readl(addrp)) and writel(cpu_to_le32(*data), addrp)?
> Maybe they are wrong?
I guess they are wrong and need to be fixed. You can have a look at
include/asm-generic/io.h to see that the byteswap is already done
there.
> > > + if (*data == 0xffffffff) {
> > > + *data = -1;
> > > + return PCIBIOS_DEVICE_NOT_FOUND;
> > > + }
> > > + }
> > > + return PCIBIOS_SUCCESSFUL;
> > > +}
> > > +
> > > +static int loongson3_pci_pcibios_read(struct pci_bus *bus, unsigned int
> > devfn,
> > > + int where, int size, u32 *val)
> > > +{
> > > + u32 data = 0;
> > > + int ret = loongson3_pci_config_access(PCI_ACCESS_READ,
> > > + bus, devfn, where, &data);
> > > +
> > > + if (ret != PCIBIOS_SUCCESSFUL)
> > > + return ret;
> > > +
> > > + if (size == 1)
> > > + *val = (data >> ((where & 3) << 3)) & 0xff;
> > > + else if (size == 2)
> > > + *val = (data >> ((where & 3) << 3)) & 0xffff;
> > > + else
> > > + *val = data;
> > > +
> > > + return PCIBIOS_SUCCESSFUL;
> > > +}
> > > +
> > > +static int loongson3_pci_pcibios_write(struct pci_bus *bus, unsigned
> > int devfn,
> > > + int where, int size, u32 val)
> > > +{
> > > + u32 data = 0;
> > > + int ret;
> > > +
> > > + if (size == 4)
> > > + data = val;
> > > + else {
> > > + ret = loongson3_pci_config_access(PCI_ACCESS_READ,
> > > + bus, devfn, where, &data);
> > > + if (ret != PCIBIOS_SUCCESSFUL)
> > > + return ret;
> > > +
> > > + if (size == 1)
> > > + data = (data & ~(0xff << ((where & 3) << 3))) |
> > > + (val << ((where & 3) << 3));
> > > + else if (size == 2)
> > > + data = (data & ~(0xffff << ((where & 3) << 3))) |
> > > + (val << ((where & 3) << 3));
> > > + }
> > > +
> > > + ret = loongson3_pci_config_access(PCI_ACCESS_WRITE,
> > > + bus, devfn, where, &data);
> > > +
> > > + return ret;
> > > +}
> > > +
> > > +struct pci_ops loongson_pci_ops = {
> > > + .read = loongson3_pci_pcibios_read,
> > > + .write = loongson3_pci_pcibios_write
> > > +};
> > > --
> > > 1.7.7.3
> > >
> > >
> >
> > --
> > Aurelien Jarno GPG: 1024D/F1BCDB73
> > aurelien@xxxxxxxxxxx http://www.aurel32.net
> >
> >
--
Aurelien Jarno GPG: 1024D/F1BCDB73
aurelien@xxxxxxxxxxx http://www.aurel32.net
