On 08/01/14 02:44, Huacai Chen wrote:
Added Kconfig options include: Loongson-3 CPU and machine definition, CPU cache features, UEFI-like firmware interface (LEFI), HT-linked PCI, and big memory support. Signed-off-by: Huacai Chen <chenhc@xxxxxxxxxx> Signed-off-by: Hongliang Tao <taohl@xxxxxxxxxx> Signed-off-by: Hua Yan <yanh@xxxxxxxxxx> --- arch/mips/Kconfig | 29 +++++++++++++++++++++++++++- arch/mips/loongson/Kconfig | 44 +++++++++++++++++++++++++++++++++++++++++++ arch/mips/loongson/Platform | 1 + 3 files changed, 73 insertions(+), 1 deletions(-) diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index 17cc7ff..513e941 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -1487,6 +1487,18 @@ config CPU_LOONGSON2 select CPU_SUPPORTS_HIGHMEM select CPU_SUPPORTS_HUGEPAGES +config CPU_LOONGSON3 + bool "Loongson 3 CPU" + depends on SYS_HAS_CPU_LOONGSON3 + select CPU_SUPPORTS_64BIT_KERNEL + select CPU_SUPPORTS_HIGHMEM + select CPU_SUPPORTS_HUGEPAGES + select WEAK_ORDERING + select WEAK_REORDERING_BEYOND_LLSC + help + The Loongson 3 processor implements the MIPS III instruction set + with many extensions. +
This should be moved into the "CPU type" choice block. Currently this appears as an option outside of that choice, and so it is possible to build a kernel without any CPU type selected.
Also, as Aurelien said on the previous version, shouldn't the comment be changed to MIPS64R2 rather than MIPS III even if you aren't selecting the MIPS64 CPU types for the time being? Note, if you replied to that comment I may not have seen it - I think the list is filtering your replies because they're HTML emails.
config CPU_LOONGSON1 bool select CPU_MIPS32 @@ -1513,6 +1526,10 @@ config SYS_HAS_CPU_LOONGSON2F select CPU_SUPPORTS_ADDRWINCFG if 64BIT select CPU_SUPPORTS_UNCACHED_ACCELERATED +config SYS_HAS_CPU_LOONGSON3 + bool + select CPU_SUPPORTS_CPUFREQ + config SYS_HAS_CPU_LOONGSON1B bool @@ -1703,7 +1720,7 @@ choice config PAGE_SIZE_4KB bool "4kB" - depends on !CPU_LOONGSON2 + depends on !CPU_LOONGSON2 && !CPU_LOONGSON3 help This option select the standard 4kB Linux page size. On some R3000-family processors this is the only available page size. Using @@ -2373,6 +2390,16 @@ config PCI your box. Other bus systems are ISA, EISA, or VESA. If you have PCI, say Y, otherwise N. +config HT_PCI + bool "Support for HT-linked PCI" + depends on CPU_LOONGSON3 + select PCI_DOMAINS + help + Loongson family machines use Hyper-Transport bus for inter-core + connection and device connection. The PCI bus is a subordinate + linked at HT. Choose Y unless you are using Loongson 2E/2F based + machines. +
Should this default to y, given that it is selected in the defconfig? Also, the comment referring to 2E/2F is redundant given that it depends on CPU_LOONGSON3 and cannot be selected on those machines.
config PCI_DOMAINS bool diff --git a/arch/mips/loongson/Kconfig b/arch/mips/loongson/Kconfig index 263beb9..4f3967c 100644 --- a/arch/mips/loongson/Kconfig +++ b/arch/mips/loongson/Kconfig @@ -59,6 +59,33 @@ config LEMOTE_MACH2F These family machines include fuloong2f mini PC, yeeloong2f notebook, LingLoong allinone PC and so forth. + +config LEMOTE_MACH3A + bool "Lemote Loongson 3A family machines" + select ARCH_SPARSEMEM_ENABLE + select GENERIC_ISA_DMA_SUPPORT_BROKEN + select GENERIC_HARDIRQS_NO__DO_IRQ + select BOOT_ELF32 + select BOARD_SCACHE + select CSRC_R4K + select CEVT_R4K + select CPU_HAS_WB + select HW_HAS_PCI + select ISA + select I8259 + select IRQ_CPU + select SYS_HAS_CPU_LOONGSON3 + select SYS_HAS_EARLY_PRINTK + select SYS_SUPPORTS_SMP + select SYS_SUPPORTS_64BIT_KERNEL + select SYS_SUPPORTS_HIGHMEM + select SYS_SUPPORTS_LITTLE_ENDIAN + select LOONGSON_MC146818 + select ZONE_DMA32 if 64BIT + select LEFI_FIRMWARE_INTERFACE + help + Lemote Loongson 3A family machines utilize the 3A revision of + Loongson processor and RS780/SBX00 chipset. endchoice
Add "select NR_CPUS_DEFAULT_4" on here? Currently creating a configuration without using the loongson3_defconfig will default to 2, but unless I'm mistaken, all 3A machines are quad core?
config CS5536 @@ -86,8 +114,24 @@ config LOONGSON_UART_BASE default y depends on EARLY_PRINTK || SERIAL_8250 +config IOMMU_HELPER + bool + +config NEED_SG_DMA_LENGTH + bool + +config SWIOTLB + bool "Soft IOMMU Support for Big Memory (>4GB)" + depends on CPU_LOONGSON3 + select IOMMU_HELPER + select NEED_SG_DMA_LENGTH + select NEED_DMA_MAP_STATE +
Again, default to y? Thanks, Alex
config LOONGSON_MC146818 bool default n +config LEFI_FIRMWARE_INTERFACE + bool + endif # MACH_LOONGSON diff --git a/arch/mips/loongson/Platform b/arch/mips/loongson/Platform index 29692e5..6205372 100644 --- a/arch/mips/loongson/Platform +++ b/arch/mips/loongson/Platform @@ -30,3 +30,4 @@ platform-$(CONFIG_MACH_LOONGSON) += loongson/ cflags-$(CONFIG_MACH_LOONGSON) += -I$(srctree)/arch/mips/include/asm/mach-loongson -mno-branch-likely load-$(CONFIG_LEMOTE_FULOONG2E) += 0xffffffff80100000 load-$(CONFIG_LEMOTE_MACH2F) += 0xffffffff80200000 +load-$(CONFIG_CPU_LOONGSON3) += 0xffffffff80200000
