[PATCH V2 2/2] MIPS: BCM47XX: Prepare support for GPIO buttons

[Rafał Miłecki <zajec5@xxxxxxxxx>]

So far this adds support for one Netgear model only, but it's designed
and ready to add many more device. We could hopefully import database
from OpenWrt.
Support for SSB is currently disabled, because SSB doesn't implement IRQ
domain yet.

Signed-off-by: Rafał Miłecki <zajec5@xxxxxxxxx>
---
 arch/mips/bcm47xx/Makefile          |    2 +-
 arch/mips/bcm47xx/bcm47xx_private.h |    3 ++
 arch/mips/bcm47xx/buttons.c         |   81 +++++++++++++++++++++++++++++++++++
 arch/mips/bcm47xx/setup.c           |    1 +
 4 files changed, 86 insertions(+), 1 deletion(-)
 create mode 100644 arch/mips/bcm47xx/buttons.c

diff --git a/arch/mips/bcm47xx/Makefile b/arch/mips/bcm47xx/Makefile
index 84e9aed..006a05e 100644
--- a/arch/mips/bcm47xx/Makefile
+++ b/arch/mips/bcm47xx/Makefile
@@ -4,5 +4,5 @@
 #
 
 obj-y				+= irq.o nvram.o prom.o serial.o setup.o time.o sprom.o
-obj-y				+= board.o leds.o
+obj-y				+= board.o buttons.o leds.o
 obj-$(CONFIG_BCM47XX_SSB)	+= wgt634u.o
diff --git a/arch/mips/bcm47xx/bcm47xx_private.h b/arch/mips/bcm47xx/bcm47xx_private.h
index 1a1e600..5c94ace 100644
--- a/arch/mips/bcm47xx/bcm47xx_private.h
+++ b/arch/mips/bcm47xx/bcm47xx_private.h
@@ -3,6 +3,9 @@
 
 #include <linux/kernel.h>
 
+/* buttons.c */
+int __init bcm47xx_buttons_register(void);
+
 /* leds.c */
 void __init bcm47xx_leds_register(void);
 
diff --git a/arch/mips/bcm47xx/buttons.c b/arch/mips/bcm47xx/buttons.c
new file mode 100644
index 0000000..ecd6b1b
--- /dev/null
+++ b/arch/mips/bcm47xx/buttons.c
@@ -0,0 +1,81 @@
+#include "bcm47xx_private.h"
+
+#include <linux/input.h>
+#include <linux/gpio_keys.h>
+#include <linux/interrupt.h>
+#include <linux/ssb/ssb_embedded.h>
+#include <bcm47xx_board.h>
+#include <bcm47xx.h>
+
+struct input_dev *input;
+
+/**************************************************
+ * Database
+ **************************************************/
+
+static struct gpio_keys_button
+bcm47xx_buttons_netgear_wndr4500_v1[] = {
+	{
+		.code		= KEY_WPS_BUTTON,
+		.gpio		= 4,
+		.active_low	= 1,
+	},
+	{
+		.code		= KEY_RFKILL,
+		.gpio		= 5,
+		.active_low	= 1,
+	},
+	{
+		.code		= KEY_RESTART,
+		.gpio		= 6,
+		.active_low	= 1,
+	},
+};
+
+/**************************************************
+ * Init
+ **************************************************/
+
+static struct gpio_keys_platform_data bcm47xx_button_pdata;
+
+static struct platform_device bcm47xx_buttons_gpio_keys = {
+	.name = "gpio-keys",
+	.dev = {
+		.platform_data = &bcm47xx_button_pdata,
+	}
+};
+
+#define bcm47xx_set_bdata(dev_buttons) do {				\
+	bcm47xx_button_pdata.buttons = dev_buttons;			\
+	bcm47xx_button_pdata.nbuttons = ARRAY_SIZE(dev_buttons);	\
+} while (0)
+
+int __init bcm47xx_buttons_register(void)
+{
+	enum bcm47xx_board board = bcm47xx_board_get();
+	int err;
+
+#ifdef CONFIG_BCM47XX_SSB
+	if (bcm47xx_bus_type == BCM47XX_BUS_TYPE_SSB) {
+		pr_debug("Buttons on SSB are not supported yet.\n");
+		return -ENOTSUPP;
+	}
+#endif
+
+	switch (board) {
+	case BCM47XX_BOARD_NETGEAR_WNDR4500V1:
+		bcm47xx_set_bdata(bcm47xx_buttons_netgear_wndr4500_v1);
+		break;
+	default:
+		pr_debug("No buttons configuration found for this device\n");
+		return -ENOTSUPP;
+	}
+
+	err = platform_device_register(&bcm47xx_buttons_gpio_keys);
+	if (err) {
+		pr_err("Failed to register platform device: %d\n", err);
+		return err;
+	}
+
+	return 0;
+}
diff --git a/arch/mips/bcm47xx/setup.c b/arch/mips/bcm47xx/setup.c
index 7e61c0b..a791124 100644
--- a/arch/mips/bcm47xx/setup.c
+++ b/arch/mips/bcm47xx/setup.c
@@ -242,6 +242,7 @@ static int __init bcm47xx_register_bus_complete(void)
 #endif
 	}
 
+	bcm47xx_buttons_register();
 	bcm47xx_leds_register();
 
 	return 0;
-- 
1.7.10.4