As result of recent re-design of the MSI/MSI-X interrupts enabling
pattern this driver has to be updated to use the new technique to
obtain a optimal number of MSI/MSI-X interrupts required.
Signed-off-by: Alexander Gordeev <agordeev@xxxxxxxxxx>
---
drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c | 56 ++++++++++++---------
1 files changed, 32 insertions(+), 24 deletions(-)
diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c
index b94e679..a137c14 100644
--- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c
+++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c
@@ -590,7 +590,37 @@ int qlcnic_enable_msix(struct qlcnic_adapter *adapter, u32 num_msix)
adapter->flags &= ~(QLCNIC_MSI_ENABLED | QLCNIC_MSIX_ENABLED);
if (adapter->ahw->msix_supported) {
- enable_msix:
+ err = pci_msix_table_size(pdev);
+ if (err < 0)
+ goto fail;
+
+ if (err < num_msix) {
+ dev_info(&pdev->dev,
+ "Unable to allocate %d MSI-X interrupt vectors\n",
+ num_msix);
+ if (qlcnic_83xx_check(adapter)) {
+ if (err < (QLC_83XX_MINIMUM_VECTOR - tx_vector))
+ return -ENOSPC;
+ err -= (max_tx_rings + 1);
+ num_msix = rounddown_pow_of_two(err);
+ num_msix += (max_tx_rings + 1);
+ } else {
+ num_msix = rounddown_pow_of_two(err);
+ if (qlcnic_check_multi_tx(adapter))
+ num_msix += max_tx_rings;
+ }
+
+ if (!num_msix) {
+ err = -ENOSPC;
+ goto fail;
+ }
+
+ dev_info(&pdev->dev,
+ "Trying to allocate %d MSI-X interrupt vectors\n",
+ num_msix);
+ }
+ }
+
for (i = 0; i < num_msix; i++)
adapter->msix_entries[i].entry = i;
err = pci_enable_msix(pdev, adapter->msix_entries, num_msix);
@@ -613,30 +643,8 @@ int qlcnic_enable_msix(struct qlcnic_adapter *adapter, u32 num_msix)
adapter->max_sds_rings = max_sds_rings;
}
dev_info(&pdev->dev, "using msi-x interrupts\n");
- } else if (err > 0) {
- dev_info(&pdev->dev,
- "Unable to allocate %d MSI-X interrupt vectors\n",
- num_msix);
- if (qlcnic_83xx_check(adapter)) {
- if (err < (QLC_83XX_MINIMUM_VECTOR - tx_vector))
- return -ENOSPC;
- err -= (max_tx_rings + 1);
- num_msix = rounddown_pow_of_two(err);
- num_msix += (max_tx_rings + 1);
- } else {
- num_msix = rounddown_pow_of_two(err);
- if (qlcnic_check_multi_tx(adapter))
- num_msix += max_tx_rings;
- }
-
- if (num_msix) {
- dev_info(&pdev->dev,
- "Trying to allocate %d MSI-X interrupt vectors\n",
- num_msix);
- goto enable_msix;
- }
- err = -ENOSPC;
} else {
+fail:
dev_info(&pdev->dev,
"Unable to allocate %d MSI-X interrupt vectors\n",
num_msix);
--
1.7.7.6
