The Ralink RT3883 SoCs have a built-in PCI Host Controller
device. The patch adds a platform driver and device tree
binding documentation for that.
The patch also enables the HW_HAS_PCI config option. This
is required in order to be able to enable the PCI support.
Cc: devicetree@xxxxxxxxxxxxxxx
Signed-off-by: Gabor Juhos <juhosg@xxxxxxxxxxx>
Acked-by: John Crispin <blogic@xxxxxxxxxxx>
---
Changes since v2:
- fix compiler warning:
CC arch/mips/pci/pci-rt3883.o
arch/mips/pci/pci-rt3883.c: In function 'rt3883_pci_probe':
arch/mips/pci/pci-rt3883.c:458:4: warning: use of 'h' length modifier with 'a' type character [-Wformat]
Changes since v1:
- change the 'status' property to optional in the binding doc
- add board specific example to the binding doc
rt3883-pci: fix-build-warning
Signed-off-by: Gabor Juhos <juhosg@xxxxxxxxxxx>
---
.../devicetree/bindings/pci/ralink,rt3883-pci.txt | 190 ++++++
arch/mips/pci/Makefile | 1 +
arch/mips/pci/pci-rt3883.c | 636 ++++++++++++++++++++
arch/mips/ralink/Kconfig | 1 +
4 files changed, 828 insertions(+)
create mode 100644 Documentation/devicetree/bindings/pci/ralink,rt3883-pci.txt
create mode 100644 arch/mips/pci/pci-rt3883.c
diff --git a/Documentation/devicetree/bindings/pci/ralink,rt3883-pci.txt b/Documentation/devicetree/bindings/pci/ralink,rt3883-pci.txt
new file mode 100644
index 0000000..8e0a1eb
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/ralink,rt3883-pci.txt
@@ -0,0 +1,190 @@
+* Mediatek/Ralink RT3883 PCI controller
+
+1) Main node
+
+ Required properties:
+
+ - compatible: must be "ralink,rt3883-pci"
+
+ - reg: specifies the physical base address of the controller and
+ the length of the memory mapped region.
+
+ - #address-cells: specifies the number of cells needed to encode an
+ address. The value must be 1.
+
+ - #size-cells: specifies the number of cells used to represent the size
+ of an address. The value must be 1.
+
+ - ranges: specifies the translation between child address space and parent
+ address space
+
+ Optional properties:
+
+ - status: indicates the operational status of the device.
+ Value must be either "disabled" or "okay".
+
+2) Child nodes
+
+ The main node must have two child nodes which describes the built-in
+ interrupt controller and the PCI host bridge.
+
+ a) Interrupt controller:
+
+ Required properties:
+
+ - interrupt-controller: identifies the node as an interrupt controller
+
+ - #address-cells: specifies the number of cells needed to encode an
+ address. The value must be 0. As such, 'interrupt-map' nodes do not
+ have to specify a parent unit address.
+
+ - #interrupt-cells: specifies the number of cells needed to encode an
+ interrupt source. The value must be 1.
+
+ - interrupt-parent: the phandle for the interrupt controller that
+ services interrupts for this device.
+
+ - interrupts: specifies the interrupt source of the parent interrupt
+ controller. The format of the interrupt specifier depends on the
+ parent interrupt controller.
+
+ b) PCI host bridge:
+
+ Required properties:
+
+ - #address-cells: specifies the number of cells needed to encode an
+ address. The value must be 0.
+
+ - #size-cells: specifies the number of cells used to represent the size
+ of an address. The value must be 2.
+
+ - #interrupt-cells: specifies the number of cells needed to encode an
+ interrupt source. The value must be 1.
+
+ - device_type: must be "pci"
+
+ - bus-range: PCI bus numbers covered
+
+ - ranges: specifies the ranges for the PCI memory and I/O regions
+
+ - interrupt-map-mask,
+ - interrupt-map: standard PCI properties to define the mapping of the
+ PCI interface to interrupt numbers.
+
+ The PCI host bridge node migh have additional sub-nodes representing
+ the onboard PCI devices/PCI slots. Each such sub-node must have the
+ following mandatory properties:
+
+ - reg: used only for interrupt mapping, so only the first four bytes
+ are used to refer to the correct bus number and device number.
+
+ - device_type: must be "pci"
+
+ If a given sub-node represents a PCI bridge it must have following
+ mandatory properties as well:
+
+ - #address-cells: must be set to <3>
+
+ - #size-cells: must set to <2>
+
+ - #interrupt-cells: must be set to <1>
+
+ - interrupt-map-mask,
+ - interrupt-map: standard PCI properties to define the mapping of the
+ PCI interface to interrupt numbers.
+
+ Besides the required properties the sub-nodes may have these optional
+ properties:
+
+ - status: indicates the operational status of the sub-node.
+ Value must be either "disabled" or "okay".
+
+3) Example:
+
+ a) SoC specific dtsi file:
+
+ pci@10140000 {
+ compatible = "ralink,rt3883-pci";
+ reg = <0x10140000 0x20000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges; /* direct mapping */
+
+ status = "disabled";
+
+ pciintc: interrupt-controller {
+ interrupt-controller;
+ #address-cells = <0>;
+ #interrupt-cells = <1>;
+
+ interrupt-parent = <&cpuintc>;
+ interrupts = <4>;
+ };
+
+ host-bridge {
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+
+ device_type = "pci";
+
+ bus-range = <0 255>;
+ ranges = <
+ 0x02000000 0 0x00000000 0x20000000 0 0x10000000 /* pci memory */
+ 0x01000000 0 0x00000000 0x10160000 0 0x00010000 /* io space */
+ >;
+
+ interrupt-map-mask = <0xf800 0 0 7>;
+ interrupt-map = <
+ /* IDSEL 17 */
+ 0x8800 0 0 1 &pciintc 18
+ 0x8800 0 0 2 &pciintc 18
+ 0x8800 0 0 3 &pciintc 18
+ 0x8800 0 0 4 &pciintc 18
+ /* IDSEL 18 */
+ 0x9000 0 0 1 &pciintc 19
+ 0x9000 0 0 2 &pciintc 19
+ 0x9000 0 0 3 &pciintc 19
+ 0x9000 0 0 4 &pciintc 19
+ >;
+
+ pci-bridge@1 {
+ reg = <0x0800 0 0 0 0>;
+ device_type = "pci";
+ #interrupt-cells = <1>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+
+ interrupt-map-mask = <0x0 0 0 0>;
+ interrupt-map = <0x0 0 0 0 &pciintc 20>;
+
+ status = "disabled";
+ };
+
+ pci-slot@17 {
+ reg = <0x8800 0 0 0 0>;
+ device_type = "pci";
+
+ status = "disabled";
+ };
+
+ pci-slot@18 {
+ reg = <0x9000 0 0 0 0>;
+ device_type = "pci";
+
+ status = "disabled";
+ };
+ };
+ };
+
+ b) Board specific dts file:
+
+ pci@10140000 {
+ status = "okay";
+
+ host-bridge {
+ pci-bridge@1 {
+ status = "okay";
+ };
+ };
+ };
diff --git a/arch/mips/pci/Makefile b/arch/mips/pci/Makefile
index c382042..719e455 100644
--- a/arch/mips/pci/Makefile
+++ b/arch/mips/pci/Makefile
@@ -41,6 +41,7 @@ obj-$(CONFIG_SIBYTE_BCM1x80) += pci-bcm1480.o pci-bcm1480ht.o
obj-$(CONFIG_SNI_RM) += fixup-sni.o ops-sni.o
obj-$(CONFIG_LANTIQ) += fixup-lantiq.o
obj-$(CONFIG_PCI_LANTIQ) += pci-lantiq.o ops-lantiq.o
+obj-$(CONFIG_SOC_RT3883) += pci-rt3883.o
obj-$(CONFIG_TANBAC_TB0219) += fixup-tb0219.o
obj-$(CONFIG_TANBAC_TB0226) += fixup-tb0226.o
obj-$(CONFIG_TANBAC_TB0287) += fixup-tb0287.o
diff --git a/arch/mips/pci/pci-rt3883.c b/arch/mips/pci/pci-rt3883.c
new file mode 100644
index 0000000..95c9d41
--- /dev/null
+++ b/arch/mips/pci/pci-rt3883.c
@@ -0,0 +1,636 @@
+/*
+ * Ralink RT3662/RT3883 SoC PCI support
+ *
+ * Copyright (C) 2011-2013 Gabor Juhos <juhosg@xxxxxxxxxxx>
+ *
+ * Parts of this file are based on Ralink's 2.6.21 BSP
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <linux/types.h>
+#include <linux/pci.h>
+#include <linux/io.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_irq.h>
+#include <linux/of_pci.h>
+#include <linux/platform_device.h>
+
+#include <asm/mach-ralink/rt3883.h>
+#include <asm/mach-ralink/ralink_regs.h>
+
+#define RT3883_MEMORY_BASE 0x00000000
+#define RT3883_MEMORY_SIZE 0x02000000
+
+#define RT3883_PCI_REG_PCICFG 0x00
+#define RT3883_PCICFG_P2P_BR_DEVNUM_M 0xf
+#define RT3883_PCICFG_P2P_BR_DEVNUM_S 16
+#define RT3883_PCICFG_PCIRST BIT(1)
+#define RT3883_PCI_REG_PCIRAW 0x04
+#define RT3883_PCI_REG_PCIINT 0x08
+#define RT3883_PCI_REG_PCIENA 0x0c
+
+#define RT3883_PCI_REG_CFGADDR 0x20
+#define RT3883_PCI_REG_CFGDATA 0x24
+#define RT3883_PCI_REG_MEMBASE 0x28
+#define RT3883_PCI_REG_IOBASE 0x2c
+#define RT3883_PCI_REG_ARBCTL 0x80
+
+#define RT3883_PCI_REG_BASE(_x) (0x1000 + (_x) * 0x1000)
+#define RT3883_PCI_REG_BAR0SETUP(_x) (RT3883_PCI_REG_BASE((_x)) + 0x10)
+#define RT3883_PCI_REG_IMBASEBAR0(_x) (RT3883_PCI_REG_BASE((_x)) + 0x18)
+#define RT3883_PCI_REG_ID(_x) (RT3883_PCI_REG_BASE((_x)) + 0x30)
+#define RT3883_PCI_REG_CLASS(_x) (RT3883_PCI_REG_BASE((_x)) + 0x34)
+#define RT3883_PCI_REG_SUBID(_x) (RT3883_PCI_REG_BASE((_x)) + 0x38)
+#define RT3883_PCI_REG_STATUS(_x) (RT3883_PCI_REG_BASE((_x)) + 0x50)
+
+#define RT3883_PCI_MODE_NONE 0
+#define RT3883_PCI_MODE_PCI BIT(0)
+#define RT3883_PCI_MODE_PCIE BIT(1)
+#define RT3883_PCI_MODE_BOTH (RT3883_PCI_MODE_PCI | RT3883_PCI_MODE_PCIE)
+
+#define RT3883_PCI_IRQ_COUNT 32
+
+#define RT3883_P2P_BR_DEVNUM 1
+
+struct rt3883_pci_controller {
+ void __iomem *base;
+ spinlock_t lock;
+
+ struct device_node *intc_of_node;
+ struct irq_domain *irq_domain;
+
+ struct pci_controller pci_controller;
+ struct resource io_res;
+ struct resource mem_res;
+
+ bool pcie_ready;
+};
+
+static inline struct rt3883_pci_controller *
+pci_bus_to_rt3883_controller(struct pci_bus *bus)
+{
+ struct pci_controller *hose;
+
+ hose = (struct pci_controller *) bus->sysdata;
+ return container_of(hose, struct rt3883_pci_controller, pci_controller);
+}
+
+static inline u32 rt3883_pci_r32(struct rt3883_pci_controller *rpc,
+ unsigned reg)
+{
+ return ioread32(rpc->base + reg);
+}
+
+static inline void rt3883_pci_w32(struct rt3883_pci_controller *rpc,
+ u32 val, unsigned reg)
+{
+ iowrite32(val, rpc->base + reg);
+}
+
+static inline u32 rt3883_pci_get_cfgaddr(unsigned int bus, unsigned int slot,
+ unsigned int func, unsigned int where)
+{
+ return (bus << 16) | (slot << 11) | (func << 8) | (where & 0xfc) |
+ 0x80000000;
+}
+
+static u32 rt3883_pci_read_cfg32(struct rt3883_pci_controller *rpc,
+ unsigned bus, unsigned slot,
+ unsigned func, unsigned reg)
+{
+ unsigned long flags;
+ u32 address;
+ u32 ret;
+
+ address = rt3883_pci_get_cfgaddr(bus, slot, func, reg);
+
+ spin_lock_irqsave(&rpc->lock, flags);
+ rt3883_pci_w32(rpc, address, RT3883_PCI_REG_CFGADDR);
+ ret = rt3883_pci_r32(rpc, RT3883_PCI_REG_CFGDATA);
+ spin_unlock_irqrestore(&rpc->lock, flags);
+
+ return ret;
+}
+
+static void rt3883_pci_write_cfg32(struct rt3883_pci_controller *rpc,
+ unsigned bus, unsigned slot,
+ unsigned func, unsigned reg, u32 val)
+{
+ unsigned long flags;
+ u32 address;
+
+ address = rt3883_pci_get_cfgaddr(bus, slot, func, reg);
+
+ spin_lock_irqsave(&rpc->lock, flags);
+ rt3883_pci_w32(rpc, address, RT3883_PCI_REG_CFGADDR);
+ rt3883_pci_w32(rpc, val, RT3883_PCI_REG_CFGDATA);
+ spin_unlock_irqrestore(&rpc->lock, flags);
+}
+
+static void rt3883_pci_irq_handler(unsigned int irq, struct irq_desc *desc)
+{
+ struct rt3883_pci_controller *rpc;
+ u32 pending;
+
+ rpc = irq_get_handler_data(irq);
+
+ pending = rt3883_pci_r32(rpc, RT3883_PCI_REG_PCIINT) &
+ rt3883_pci_r32(rpc, RT3883_PCI_REG_PCIENA);
+
+ if (!pending) {
+ spurious_interrupt();
+ return;
+ }
+
+ while (pending) {
+ unsigned bit = __ffs(pending);
+
+ irq = irq_find_mapping(rpc->irq_domain, bit);
+ generic_handle_irq(irq);
+
+ pending &= ~BIT(bit);
+ }
+}
+
+static void rt3883_pci_irq_unmask(struct irq_data *d)
+{
+ struct rt3883_pci_controller *rpc;
+ u32 t;
+
+ rpc = irq_data_get_irq_chip_data(d);
+
+ t = rt3883_pci_r32(rpc, RT3883_PCI_REG_PCIENA);
+ rt3883_pci_w32(rpc, t | BIT(d->hwirq), RT3883_PCI_REG_PCIENA);
+ /* flush write */
+ rt3883_pci_r32(rpc, RT3883_PCI_REG_PCIENA);
+}
+
+static void rt3883_pci_irq_mask(struct irq_data *d)
+{
+ struct rt3883_pci_controller *rpc;
+ u32 t;
+
+ rpc = irq_data_get_irq_chip_data(d);
+
+ t = rt3883_pci_r32(rpc, RT3883_PCI_REG_PCIENA);
+ rt3883_pci_w32(rpc, t & ~BIT(d->hwirq), RT3883_PCI_REG_PCIENA);
+ /* flush write */
+ rt3883_pci_r32(rpc, RT3883_PCI_REG_PCIENA);
+}
+
+static struct irq_chip rt3883_pci_irq_chip = {
+ .name = "RT3883 PCI",
+ .irq_mask = rt3883_pci_irq_mask,
+ .irq_unmask = rt3883_pci_irq_unmask,
+ .irq_mask_ack = rt3883_pci_irq_mask,
+};
+
+static int rt3883_pci_irq_map(struct irq_domain *d, unsigned int irq,
+ irq_hw_number_t hw)
+{
+ irq_set_chip_and_handler(irq, &rt3883_pci_irq_chip, handle_level_irq);
+ irq_set_chip_data(irq, d->host_data);
+
+ return 0;
+}
+
+static const struct irq_domain_ops rt3883_pci_irq_domain_ops = {
+ .map = rt3883_pci_irq_map,
+ .xlate = irq_domain_xlate_onecell,
+};
+
+static int rt3883_pci_irq_init(struct device *dev,
+ struct rt3883_pci_controller *rpc)
+{
+ int irq;
+
+ irq = irq_of_parse_and_map(rpc->intc_of_node, 0);
+ if (irq == 0) {
+ dev_err(dev, "%s has no IRQ",
+ of_node_full_name(rpc->intc_of_node));
+ return -EINVAL;
+ }
+
+ /* disable all interrupts */
+ rt3883_pci_w32(rpc, 0, RT3883_PCI_REG_PCIENA);
+
+ rpc->irq_domain =
+ irq_domain_add_linear(rpc->intc_of_node, RT3883_PCI_IRQ_COUNT,
+ &rt3883_pci_irq_domain_ops,
+ rpc);
+ if (!rpc->irq_domain) {
+ dev_err(dev, "unable to add IRQ domain\n");
+ return -ENODEV;
+ }
+
+ irq_set_handler_data(irq, rpc);
+ irq_set_chained_handler(irq, rt3883_pci_irq_handler);
+
+ return 0;
+}
+
+static int rt3883_pci_config_read(struct pci_bus *bus, unsigned int devfn,
+ int where, int size, u32 *val)
+{
+ struct rt3883_pci_controller *rpc;
+ unsigned long flags;
+ u32 address;
+ u32 data;
+
+ rpc = pci_bus_to_rt3883_controller(bus);
+
+ if (!rpc->pcie_ready && bus->number == 1)
+ return PCIBIOS_DEVICE_NOT_FOUND;
+
+ address = rt3883_pci_get_cfgaddr(bus->number, PCI_SLOT(devfn),
+ PCI_FUNC(devfn), where);
+
+ spin_lock_irqsave(&rpc->lock, flags);
+ rt3883_pci_w32(rpc, address, RT3883_PCI_REG_CFGADDR);
+ data = rt3883_pci_r32(rpc, RT3883_PCI_REG_CFGDATA);
+ spin_unlock_irqrestore(&rpc->lock, flags);
+
+ switch (size) {
+ case 1:
+ *val = (data >> ((where & 3) << 3)) & 0xff;
+ break;
+ case 2:
+ *val = (data >> ((where & 3) << 3)) & 0xffff;
+ break;
+ case 4:
+ *val = data;
+ break;
+ }
+
+ return PCIBIOS_SUCCESSFUL;
+}
+
+static int rt3883_pci_config_write(struct pci_bus *bus, unsigned int devfn,
+ int where, int size, u32 val)
+{
+ struct rt3883_pci_controller *rpc;
+ unsigned long flags;
+ u32 address;
+ u32 data;
+
+ rpc = pci_bus_to_rt3883_controller(bus);
+
+ if (!rpc->pcie_ready && bus->number == 1)
+ return PCIBIOS_DEVICE_NOT_FOUND;
+
+ address = rt3883_pci_get_cfgaddr(bus->number, PCI_SLOT(devfn),
+ PCI_FUNC(devfn), where);
+
+ spin_lock_irqsave(&rpc->lock, flags);
+ rt3883_pci_w32(rpc, address, RT3883_PCI_REG_CFGADDR);
+ data = rt3883_pci_r32(rpc, RT3883_PCI_REG_CFGDATA);
+
+ switch (size) {
+ case 1:
+ data = (data & ~(0xff << ((where & 3) << 3))) |
+ (val << ((where & 3) << 3));
+ break;
+ case 2:
+ data = (data & ~(0xffff << ((where & 3) << 3))) |
+ (val << ((where & 3) << 3));
+ break;
+ case 4:
+ data = val;
+ break;
+ }
+
+ rt3883_pci_w32(rpc, data, RT3883_PCI_REG_CFGDATA);
+ spin_unlock_irqrestore(&rpc->lock, flags);
+
+ return PCIBIOS_SUCCESSFUL;
+}
+
+static struct pci_ops rt3883_pci_ops = {
+ .read = rt3883_pci_config_read,
+ .write = rt3883_pci_config_write,
+};
+
+static void rt3883_pci_preinit(struct rt3883_pci_controller *rpc, unsigned mode)
+{
+ u32 syscfg1;
+ u32 rstctrl;
+ u32 clkcfg1;
+ u32 t;
+
+ rstctrl = rt_sysc_r32(RT3883_SYSC_REG_RSTCTRL);
+ syscfg1 = rt_sysc_r32(RT3883_SYSC_REG_SYSCFG1);
+ clkcfg1 = rt_sysc_r32(RT3883_SYSC_REG_CLKCFG1);
+
+ if (mode & RT3883_PCI_MODE_PCIE) {
+ rstctrl |= RT3883_RSTCTRL_PCIE;
+ rt_sysc_w32(rstctrl, RT3883_SYSC_REG_RSTCTRL);
+
+ /* setup PCI PAD drive mode */
+ syscfg1 &= ~(0x30);
+ syscfg1 |= (2 << 4);
+ rt_sysc_w32(syscfg1, RT3883_SYSC_REG_SYSCFG1);
+
+ t = rt_sysc_r32(RT3883_SYSC_REG_PCIE_CLK_GEN0);
+ t &= ~BIT(31);
+ rt_sysc_w32(t, RT3883_SYSC_REG_PCIE_CLK_GEN0);
+
+ t = rt_sysc_r32(RT3883_SYSC_REG_PCIE_CLK_GEN1);
+ t &= 0x80ffffff;
+ rt_sysc_w32(t, RT3883_SYSC_REG_PCIE_CLK_GEN1);
+
+ t = rt_sysc_r32(RT3883_SYSC_REG_PCIE_CLK_GEN1);
+ t |= 0xa << 24;
+ rt_sysc_w32(t, RT3883_SYSC_REG_PCIE_CLK_GEN1);
+
+ t = rt_sysc_r32(RT3883_SYSC_REG_PCIE_CLK_GEN0);
+ t |= BIT(31);
+ rt_sysc_w32(t, RT3883_SYSC_REG_PCIE_CLK_GEN0);
+
+ msleep(50);
+
+ rstctrl &= ~RT3883_RSTCTRL_PCIE;
+ rt_sysc_w32(rstctrl, RT3883_SYSC_REG_RSTCTRL);
+ }
+
+ syscfg1 |= (RT3883_SYSCFG1_PCIE_RC_MODE | RT3883_SYSCFG1_PCI_HOST_MODE);
+
+ clkcfg1 &= ~(RT3883_CLKCFG1_PCI_CLK_EN | RT3883_CLKCFG1_PCIE_CLK_EN);
+
+ if (mode & RT3883_PCI_MODE_PCI) {
+ clkcfg1 |= RT3883_CLKCFG1_PCI_CLK_EN;
+ rstctrl &= ~RT3883_RSTCTRL_PCI;
+ }
+
+ if (mode & RT3883_PCI_MODE_PCIE) {
+ clkcfg1 |= RT3883_CLKCFG1_PCIE_CLK_EN;
+ rstctrl &= ~RT3883_RSTCTRL_PCIE;
+ }
+
+ rt_sysc_w32(syscfg1, RT3883_SYSC_REG_SYSCFG1);
+ rt_sysc_w32(rstctrl, RT3883_SYSC_REG_RSTCTRL);
+ rt_sysc_w32(clkcfg1, RT3883_SYSC_REG_CLKCFG1);
+
+ msleep(500);
+
+ /*
+ * setup the device number of the P2P bridge
+ * and de-assert the reset line
+ */
+ t = (RT3883_P2P_BR_DEVNUM << RT3883_PCICFG_P2P_BR_DEVNUM_S);
+ rt3883_pci_w32(rpc, t, RT3883_PCI_REG_PCICFG);
+
+ /* flush write */
+ rt3883_pci_r32(rpc, RT3883_PCI_REG_PCICFG);
+ msleep(500);
+
+ if (mode & RT3883_PCI_MODE_PCIE) {
+ msleep(500);
+
+ t = rt3883_pci_r32(rpc, RT3883_PCI_REG_STATUS(1));
+
+ rpc->pcie_ready = t & BIT(0);
+
+ if (!rpc->pcie_ready) {
+ /* reset the PCIe block */
+ t = rt_sysc_r32(RT3883_SYSC_REG_RSTCTRL);
+ t |= RT3883_RSTCTRL_PCIE;
+ rt_sysc_w32(t, RT3883_SYSC_REG_RSTCTRL);
+ t &= ~RT3883_RSTCTRL_PCIE;
+ rt_sysc_w32(t, RT3883_SYSC_REG_RSTCTRL);
+
+ /* turn off PCIe clock */
+ t = rt_sysc_r32(RT3883_SYSC_REG_CLKCFG1);
+ t &= ~RT3883_CLKCFG1_PCIE_CLK_EN;
+ rt_sysc_w32(t, RT3883_SYSC_REG_CLKCFG1);
+
+ t = rt_sysc_r32(RT3883_SYSC_REG_PCIE_CLK_GEN0);
+ t &= ~0xf000c080;
+ rt_sysc_w32(t, RT3883_SYSC_REG_PCIE_CLK_GEN0);
+ }
+ }
+
+ /* enable PCI arbiter */
+ rt3883_pci_w32(rpc, 0x79, RT3883_PCI_REG_ARBCTL);
+}
+
+static int rt3883_pci_probe(struct platform_device *pdev)
+{
+ struct rt3883_pci_controller *rpc;
+ struct device *dev = &pdev->dev;
+ struct device_node *np = dev->of_node;
+ struct resource *res;
+ struct device_node *child;
+ u32 val;
+ int err;
+ int mode;
+
+ rpc = devm_kzalloc(dev, sizeof(*rpc), GFP_KERNEL);
+ if (!rpc)
+ return -ENOMEM;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!res)
+ return -EINVAL;
+
+ rpc->base = devm_ioremap_resource(dev, res);
+ if (IS_ERR(rpc->base))
+ return PTR_ERR(rpc->base);
+
+ /* find the interrupt controller child node */
+ for_each_child_of_node(np, child) {
+ if (of_get_property(child, "interrupt-controller", NULL) &&
+ of_node_get(child)) {
+ rpc->intc_of_node = child;
+ break;
+ }
+ }
+
+ if (!rpc->intc_of_node) {
+ dev_err(dev, "%s has no %s child node",
+ of_node_full_name(rpc->intc_of_node),
+ "interrupt controller");
+ return -EINVAL;
+ }
+
+ /* find the PCI host bridge child node */
+ for_each_child_of_node(np, child) {
+ if (child->type &&
+ of_node_cmp(child->type, "pci") == 0 &&
+ of_node_get(child)) {
+ rpc->pci_controller.of_node = child;
+ break;
+ }
+ }
+
+ if (!rpc->pci_controller.of_node) {
+ dev_err(dev, "%s has no %s child node",
+ of_node_full_name(rpc->intc_of_node),
+ "PCI host bridge");
+ err = -EINVAL;
+ goto err_put_intc_node;
+ }
+
+ mode = RT3883_PCI_MODE_NONE;
+ for_each_available_child_of_node(rpc->pci_controller.of_node, child) {
+ int devfn;
+
+ if (!child->type ||
+ of_node_cmp(child->type, "pci") != 0)
+ continue;
+
+ devfn = of_pci_get_devfn(child);
+ if (devfn < 0)
+ continue;
+
+ switch (PCI_SLOT(devfn)) {
+ case 1:
+ mode |= RT3883_PCI_MODE_PCIE;
+ break;
+
+ case 17:
+ case 18:
+ mode |= RT3883_PCI_MODE_PCI;
+ break;
+ }
+ }
+
+ if (mode == RT3883_PCI_MODE_NONE) {
+ dev_err(dev, "unable to determine PCI mode\n");
+ err = -EINVAL;
+ goto err_put_hb_node;
+ }
+
+ dev_info(dev, "mode:%s%s\n",
+ (mode & RT3883_PCI_MODE_PCI) ? " PCI" : "",
+ (mode & RT3883_PCI_MODE_PCIE) ? " PCIe" : "");
+
+ rt3883_pci_preinit(rpc, mode);
+
+ rpc->pci_controller.pci_ops = &rt3883_pci_ops;
+ rpc->pci_controller.io_resource = &rpc->io_res;
+ rpc->pci_controller.mem_resource = &rpc->mem_res;
+
+ /* Load PCI I/O and memory resources from DT */
+ pci_load_of_ranges(&rpc->pci_controller,
+ rpc->pci_controller.of_node);
+
+ rt3883_pci_w32(rpc, rpc->mem_res.start, RT3883_PCI_REG_MEMBASE);
+ rt3883_pci_w32(rpc, rpc->io_res.start, RT3883_PCI_REG_IOBASE);
+
+ ioport_resource.start = rpc->io_res.start;
+ ioport_resource.end = rpc->io_res.end;
+
+ /* PCI */
+ rt3883_pci_w32(rpc, 0x03ff0000, RT3883_PCI_REG_BAR0SETUP(0));
+ rt3883_pci_w32(rpc, RT3883_MEMORY_BASE, RT3883_PCI_REG_IMBASEBAR0(0));
+ rt3883_pci_w32(rpc, 0x08021814, RT3883_PCI_REG_ID(0));
+ rt3883_pci_w32(rpc, 0x00800001, RT3883_PCI_REG_CLASS(0));
+ rt3883_pci_w32(rpc, 0x28801814, RT3883_PCI_REG_SUBID(0));
+
+ /* PCIe */
+ rt3883_pci_w32(rpc, 0x03ff0000, RT3883_PCI_REG_BAR0SETUP(1));
+ rt3883_pci_w32(rpc, RT3883_MEMORY_BASE, RT3883_PCI_REG_IMBASEBAR0(1));
+ rt3883_pci_w32(rpc, 0x08021814, RT3883_PCI_REG_ID(1));
+ rt3883_pci_w32(rpc, 0x06040001, RT3883_PCI_REG_CLASS(1));
+ rt3883_pci_w32(rpc, 0x28801814, RT3883_PCI_REG_SUBID(1));
+
+ err = rt3883_pci_irq_init(dev, rpc);
+ if (err)
+ goto err_put_hb_node;
+
+ /* PCIe */
+ val = rt3883_pci_read_cfg32(rpc, 0, 0x01, 0, PCI_COMMAND);
+ val |= PCI_COMMAND_IO | PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER;
+ rt3883_pci_write_cfg32(rpc, 0, 0x01, 0, PCI_COMMAND, val);
+
+ /* PCI */
+ val = rt3883_pci_read_cfg32(rpc, 0, 0x00, 0, PCI_COMMAND);
+ val |= PCI_COMMAND_IO | PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER;
+ rt3883_pci_write_cfg32(rpc, 0, 0x00, 0, PCI_COMMAND, val);
+
+ if (mode == RT3883_PCI_MODE_PCIE) {
+ rt3883_pci_w32(rpc, 0x03ff0001, RT3883_PCI_REG_BAR0SETUP(0));
+ rt3883_pci_w32(rpc, 0x03ff0001, RT3883_PCI_REG_BAR0SETUP(1));
+
+ rt3883_pci_write_cfg32(rpc, 0, RT3883_P2P_BR_DEVNUM, 0,
+ PCI_BASE_ADDRESS_0,
+ RT3883_MEMORY_BASE);
+ /* flush write */
+ rt3883_pci_read_cfg32(rpc, 0, RT3883_P2P_BR_DEVNUM, 0,
+ PCI_BASE_ADDRESS_0);
+ } else {
+ rt3883_pci_write_cfg32(rpc, 0, RT3883_P2P_BR_DEVNUM, 0,
+ PCI_IO_BASE, 0x00000101);
+ }
+
+ register_pci_controller(&rpc->pci_controller);
+
+ return 0;
+
+err_put_hb_node:
+ of_node_put(rpc->pci_controller.of_node);
+err_put_intc_node:
+ of_node_put(rpc->intc_of_node);
+ return err;
+}
+
+int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
+{
+ struct of_irq dev_irq;
+ int err;
+ int irq;
+
+ err = of_irq_map_pci(dev, &dev_irq);
+ if (err) {
+ pr_err("pci %s: unable to get irq map, err=%d\n",
+ pci_name((struct pci_dev *) dev), err);
+ return 0;
+ }
+
+ irq = irq_create_of_mapping(dev_irq.controller,
+ dev_irq.specifier,
+ dev_irq.size);
+
+ if (irq == 0)
+ pr_crit("pci %s: no irq found for pin %u\n",
+ pci_name((struct pci_dev *) dev), pin);
+ else
+ pr_info("pci %s: using irq %d for pin %u\n",
+ pci_name((struct pci_dev *) dev), irq, pin);
+
+ return irq;
+}
+
+int pcibios_plat_dev_init(struct pci_dev *dev)
+{
+ return 0;
+}
+
+static const struct of_device_id rt3883_pci_ids[] = {
+ { .compatible = "ralink,rt3883-pci" },
+ {},
+};
+MODULE_DEVICE_TABLE(of, rt3883_pci_ids);
+
+static struct platform_driver rt3883_pci_driver = {
+ .probe = rt3883_pci_probe,
+ .driver = {
+ .name = "rt3883-pci",
+ .owner = THIS_MODULE,
+ .of_match_table = of_match_ptr(rt3883_pci_ids),
+ },
+};
+
+static int __init rt3883_pci_init(void)
+{
+ return platform_driver_register(&rt3883_pci_driver);
+}
+
+postcore_initcall(rt3883_pci_init);
diff --git a/arch/mips/ralink/Kconfig b/arch/mips/ralink/Kconfig
index 026e823..71730fa 100644
--- a/arch/mips/ralink/Kconfig
+++ b/arch/mips/ralink/Kconfig
@@ -19,6 +19,7 @@ choice
bool "RT3883"
select USB_ARCH_HAS_OHCI
select USB_ARCH_HAS_EHCI
+ select HW_HAS_PCI
config SOC_MT7620
bool "MT7620"
--
1.7.10
