On Thu, Aug 08, 2013 at 11:31:43AM +0200, John Crispin wrote:
> Add a driver for the watchdog timer found on Ralink SoC
>
> Signed-off-by: John Crispin <blogic@xxxxxxxxxxx>
> Cc: linux-watchdog@xxxxxxxxxxxxxxx
> Cc: linux-mips@xxxxxxxxxxxxxx
Reviewed-by: Guenter Roeck <linux@xxxxxxxxxxxx>
> ---
> drivers/watchdog/Kconfig | 7 ++
> drivers/watchdog/Makefile | 1 +
> drivers/watchdog/rt2880_wdt.c | 208 +++++++++++++++++++++++++++++++++++++++++
> 3 files changed, 216 insertions(+)
> create mode 100644 drivers/watchdog/rt2880_wdt.c
>
> diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
> index 362085d..00b1450 100644
> --- a/drivers/watchdog/Kconfig
> +++ b/drivers/watchdog/Kconfig
> @@ -1117,6 +1117,13 @@ config LANTIQ_WDT
> help
> Hardware driver for the Lantiq SoC Watchdog Timer.
>
> +config RALINK_WDT
> + tristate "Ralink SoC watchdog"
> + select WATCHDOG_CORE
> + depends on RALINK
> + help
> + Hardware driver for the Ralink SoC Watchdog Timer.
> +
> # PARISC Architecture
>
> # POWERPC Architecture
> diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile
> index 2f26a0b..8ce381d 100644
> --- a/drivers/watchdog/Makefile
> +++ b/drivers/watchdog/Makefile
> @@ -135,6 +135,7 @@ obj-$(CONFIG_TXX9_WDT) += txx9wdt.o
> obj-$(CONFIG_OCTEON_WDT) += octeon-wdt.o
> octeon-wdt-y := octeon-wdt-main.o octeon-wdt-nmi.o
> obj-$(CONFIG_LANTIQ_WDT) += lantiq_wdt.o
> +obj-$(CONFIG_RALINK_WDT) += rt2880_wdt.o
>
> # PARISC Architecture
>
> diff --git a/drivers/watchdog/rt2880_wdt.c b/drivers/watchdog/rt2880_wdt.c
> new file mode 100644
> index 0000000..4d07964
> --- /dev/null
> +++ b/drivers/watchdog/rt2880_wdt.c
> @@ -0,0 +1,208 @@
> +/*
> + * Ralink RT288x/RT3xxx/MT76xx built-in hardware watchdog timer
> + *
> + * Copyright (C) 2011 Gabor Juhos <juhosg@xxxxxxxxxxx>
> + * Copyright (C) 2013 John Crispin <blogic@xxxxxxxxxxx>
> + *
> + * This driver was based on: drivers/watchdog/softdog.c
> + *
> + * This program is free software; you can redistribute it and/or modify it
> + * under the terms of the GNU General Public License version 2 as published
> + * by the Free Software Foundation.
> + */
> +
> +#include <linux/clk.h>
> +#include <linux/reset.h>
> +#include <linux/module.h>
> +#include <linux/kernel.h>
> +#include <linux/watchdog.h>
> +#include <linux/miscdevice.h>
> +#include <linux/moduleparam.h>
> +#include <linux/platform_device.h>
> +
> +#include <asm/mach-ralink/ralink_regs.h>
> +
> +#define SYSC_RSTSTAT 0x38
> +#define WDT_RST_CAUSE BIT(1)
> +
> +#define RALINK_WDT_TIMEOUT 30
> +#define RALINK_WDT_PRESCALE 65536
> +
> +#define TIMER_REG_TMR1LOAD 0x00
> +#define TIMER_REG_TMR1CTL 0x08
> +
> +#define TMRSTAT_TMR1RST BIT(5)
> +
> +#define TMR1CTL_ENABLE BIT(7)
> +#define TMR1CTL_MODE_SHIFT 4
> +#define TMR1CTL_MODE_MASK 0x3
> +#define TMR1CTL_MODE_FREE_RUNNING 0x0
> +#define TMR1CTL_MODE_PERIODIC 0x1
> +#define TMR1CTL_MODE_TIMEOUT 0x2
> +#define TMR1CTL_MODE_WDT 0x3
> +#define TMR1CTL_PRESCALE_MASK 0xf
> +#define TMR1CTL_PRESCALE_65536 0xf
> +
> +static struct clk *rt288x_wdt_clk;
> +static unsigned long rt288x_wdt_freq;
> +static void __iomem *rt288x_wdt_base;
> +
> +static bool nowayout = WATCHDOG_NOWAYOUT;
> +module_param(nowayout, bool, 0);
> +MODULE_PARM_DESC(nowayout,
> + "Watchdog cannot be stopped once started (default="
> + __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
> +
> +static inline void rt_wdt_w32(unsigned reg, u32 val)
> +{
> + iowrite32(val, rt288x_wdt_base + reg);
> +}
> +
> +static inline u32 rt_wdt_r32(unsigned reg)
> +{
> + return ioread32(rt288x_wdt_base + reg);
> +}
> +
> +static int rt288x_wdt_ping(struct watchdog_device *w)
> +{
> + rt_wdt_w32(TIMER_REG_TMR1LOAD, w->timeout * rt288x_wdt_freq);
> +
> + return 0;
> +}
> +
> +static int rt288x_wdt_start(struct watchdog_device *w)
> +{
> + u32 t;
> +
> + t = rt_wdt_r32(TIMER_REG_TMR1CTL);
> + t &= ~(TMR1CTL_MODE_MASK << TMR1CTL_MODE_SHIFT |
> + TMR1CTL_PRESCALE_MASK);
> + t |= (TMR1CTL_MODE_WDT << TMR1CTL_MODE_SHIFT |
> + TMR1CTL_PRESCALE_65536);
> + rt_wdt_w32(TIMER_REG_TMR1CTL, t);
> +
> + rt288x_wdt_ping(w);
> +
> + t = rt_wdt_r32(TIMER_REG_TMR1CTL);
> + t |= TMR1CTL_ENABLE;
> + rt_wdt_w32(TIMER_REG_TMR1CTL, t);
> +
> + return 0;
> +}
> +
> +static int rt288x_wdt_stop(struct watchdog_device *w)
> +{
> + u32 t;
> +
> + rt288x_wdt_ping(w);
> +
> + t = rt_wdt_r32(TIMER_REG_TMR1CTL);
> + t &= ~TMR1CTL_ENABLE;
> + rt_wdt_w32(TIMER_REG_TMR1CTL, t);
> +
> + return 0;
> +}
> +
> +static int rt288x_wdt_set_timeout(struct watchdog_device *w, unsigned int t)
> +{
> + w->timeout = t;
> + rt288x_wdt_ping(w);
> +
> + return 0;
> +}
> +
> +static int rt288x_wdt_bootcause(void)
> +{
> + if (rt_sysc_r32(SYSC_RSTSTAT) & WDT_RST_CAUSE)
> + return WDIOF_CARDRESET;
> +
> + return 0;
> +}
> +
> +static struct watchdog_info rt288x_wdt_info = {
> + .identity = "Ralink Watchdog",
> + .options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING | WDIOF_MAGICCLOSE,
> +};
> +
> +static struct watchdog_ops rt288x_wdt_ops = {
> + .owner = THIS_MODULE,
> + .start = rt288x_wdt_start,
> + .stop = rt288x_wdt_stop,
> + .ping = rt288x_wdt_ping,
> + .set_timeout = rt288x_wdt_set_timeout,
> +};
> +
> +static struct watchdog_device rt288x_wdt_dev = {
> + .info = &rt288x_wdt_info,
> + .ops = &rt288x_wdt_ops,
> + .min_timeout = 1,
> +};
> +
> +static int rt288x_wdt_probe(struct platform_device *pdev)
> +{
> + struct resource *res;
> + int ret;
> +
> + res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> + rt288x_wdt_base = devm_request_and_ioremap(&pdev->dev, res);
> + if (IS_ERR(rt288x_wdt_base))
> + return PTR_ERR(rt288x_wdt_base);
> +
> + rt288x_wdt_clk = devm_clk_get(&pdev->dev, NULL);
> + if (IS_ERR(rt288x_wdt_clk))
> + return PTR_ERR(rt288x_wdt_clk);
> +
> + device_reset(&pdev->dev);
> +
> + rt288x_wdt_freq = clk_get_rate(rt288x_wdt_clk) / RALINK_WDT_PRESCALE;
> +
> + rt288x_wdt_dev.dev = &pdev->dev;
> + rt288x_wdt_dev.bootstatus = rt288x_wdt_bootcause();
> +
> + rt288x_wdt_dev.max_timeout = (0xfffful / rt288x_wdt_freq);
> + rt288x_wdt_dev.timeout = rt288x_wdt_dev.max_timeout;
> +
> + watchdog_set_nowayout(&rt288x_wdt_dev, nowayout);
> +
> + ret = watchdog_register_device(&rt288x_wdt_dev);
> + if (!ret)
> + dev_info(&pdev->dev, "Initialized\n");
> +
> + return 0;
> +}
> +
> +static int rt288x_wdt_remove(struct platform_device *pdev)
> +{
> + watchdog_unregister_device(&rt288x_wdt_dev);
> +
> + return 0;
> +}
> +
> +static void rt288x_wdt_shutdown(struct platform_device *pdev)
> +{
> + rt288x_wdt_stop(&rt288x_wdt_dev);
> +}
> +
> +static const struct of_device_id rt288x_wdt_match[] = {
> + { .compatible = "ralink,rt2880-wdt" },
> + {},
> +};
> +MODULE_DEVICE_TABLE(of, rt288x_wdt_match);
> +
> +static struct platform_driver rt288x_wdt_driver = {
> + .probe = rt288x_wdt_probe,
> + .remove = rt288x_wdt_remove,
> + .shutdown = rt288x_wdt_shutdown,
> + .driver = {
> + .name = KBUILD_MODNAME,
> + .owner = THIS_MODULE,
> + .of_match_table = rt288x_wdt_match,
> + },
> +};
> +
> +module_platform_driver(rt288x_wdt_driver);
> +
> +MODULE_DESCRIPTION("MediaTek/Ralink RT288x/RT3xxx hardware watchdog driver");
> +MODULE_AUTHOR("Gabor Juhos <juhosg@xxxxxxxxxxx");
> +MODULE_LICENSE("GPL v2");
> +MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);
> --
> 1.7.10.4
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-watchdog" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at http://vger.kernel.org/majordomo-info.html
>
