From: Thomas Langer <thomas.langer@xxxxxxxxxx>
Add use of devm_pinctrl_get_select_default to active default pinctrl settings.
Signed-off-by: Thomas Langer <thomas.langer@xxxxxxxxxx>
Acked-by: John Crispin <blogic@xxxxxxxxxxx>
---
drivers/tty/serial/lantiq.c | 7 +++++++
1 file changed, 7 insertions(+)
diff --git a/drivers/tty/serial/lantiq.c b/drivers/tty/serial/lantiq.c
index ce1ea35..0dcaf3a 100644
--- a/drivers/tty/serial/lantiq.c
+++ b/drivers/tty/serial/lantiq.c
@@ -37,6 +37,8 @@
#include <linux/io.h>
#include <linux/clk.h>
#include <linux/gpio.h>
+#include <linux/pinctrl/consumer.h>
+#include <linux/err.h>
#include <lantiq_soc.h>
@@ -681,6 +683,7 @@ lqasc_probe(struct platform_device *pdev)
struct ltq_uart_port *ltq_port;
struct uart_port *port;
struct resource *mmres, irqres[3];
+ struct pinctrl *pinctrl;
int line = 0;
int ret;
@@ -719,6 +722,10 @@ lqasc_probe(struct platform_device *pdev)
port->irq = irqres[0].start;
port->mapbase = mmres->start;
+ pinctrl = devm_pinctrl_get_select_default(&pdev->dev);
+ if (IS_ERR(pinctrl))
+ dev_warn(&pdev->dev, "pins are not configured from the driver\n");
+
ltq_port->fpiclk = clk_get_fpi();
if (IS_ERR(ltq_port->fpiclk)) {
pr_err("failed to get fpi clk\n");
--
1.7.10.4
