From: Florian Fainelli <florian@xxxxxxxxxxx> The current BMIPS SMP code assumes that the slave CPU is physical and logical CPU 1, but on some systems such as BCM3368, the slave CPU is physical CPU0. Fix the code to read the physical CPU (thread ID) we are running this code on, and adjust the relocation vector address based on it. This allows bringing up the second CPU on BCM3368 for instance. Signed-off-by: Florian Fainelli <florian@xxxxxxxxxxx> --- arch/mips/kernel/bmips_vec.S | 6 +++++- arch/mips/kernel/smp-bmips.c | 10 ++++++++-- 2 files changed, 13 insertions(+), 3 deletions(-) diff --git a/arch/mips/kernel/bmips_vec.S b/arch/mips/kernel/bmips_vec.S index f739aed..bd79c4f 100644 --- a/arch/mips/kernel/bmips_vec.S +++ b/arch/mips/kernel/bmips_vec.S @@ -54,7 +54,11 @@ LEAF(bmips_smp_movevec) /* set up CPU1 CBR; move BASE to 0xa000_0000 */ li k0, 0xff400000 mtc0 k0, $22, 6 - li k1, CKSEG1 | BMIPS_RELO_VECTOR_CONTROL_1 + /* set up relocation vector address based on thread ID */ + mfc0 k1, $22, 3 + srl k1, 16 + andi k1, 0x8000 + or k1, CKSEG1 | BMIPS_RELO_VECTOR_CONTROL_0 or k0, k1 li k1, 0xa0080000 sw k1, 0(k0) diff --git a/arch/mips/kernel/smp-bmips.c b/arch/mips/kernel/smp-bmips.c index 89417c9..159abc8 100644 --- a/arch/mips/kernel/smp-bmips.c +++ b/arch/mips/kernel/smp-bmips.c @@ -196,9 +196,15 @@ static void bmips_init_secondary(void) #if defined(CONFIG_CPU_BMIPS4350) || defined(CONFIG_CPU_BMIPS4380) void __iomem *cbr = BMIPS_GET_CBR(); unsigned long old_vec; + unsigned long relo_vector; + int boot_cpu; - old_vec = __raw_readl(cbr + BMIPS_RELO_VECTOR_CONTROL_1); - __raw_writel(old_vec & ~0x20000000, cbr + BMIPS_RELO_VECTOR_CONTROL_1); + boot_cpu = !!(read_c0_brcm_cmt_local() & (1 << 31)); + relo_vector = boot_cpu ? BMIPS_RELO_VECTOR_CONTROL_0 : + BMIPS_RELO_VECTOR_CONTROL_1; + + old_vec = __raw_readl(cbr + relo_vector); + __raw_writel(old_vec & ~0x20000000, cbr + relo_vector); clear_c0_cause(smp_processor_id() ? C_SW1 : C_SW0); #elif defined(CONFIG_CPU_BMIPS5000) -- 1.8.1.2
