Fix I/O space setup, so that on non-PCI systems using inb()/outb() won't crash the system. Some drivers may try to probe I/O space and for that purpose we can just allocate some normal memory initially. Drivers trying to reserve a region will fail early as we set the size to 0. If a real I/O space is present, the PCI/PCIe support code will re-adjust the values accordingly. Tested with EdgeRouter Lite by enabling CONFIG_SERIO_I8042 that caused the originally reported crash. Reported-by: Faidon Liambotis <paravoid@xxxxxxxxxx> Signed-off-by: Aaro Koskinen <aaro.koskinen@xxxxxx> --- v2: Address the issues found from the first version of the patch (http://marc.info/?t=137434204000002&r=1&w=2). arch/mips/cavium-octeon/setup.c | 28 ++++++++++++++++++++++++++++ arch/mips/pci/pci-octeon.c | 9 +++++---- 2 files changed, 33 insertions(+), 4 deletions(-) diff --git a/arch/mips/cavium-octeon/setup.c b/arch/mips/cavium-octeon/setup.c index 48b08eb..6775bd1 100644 --- a/arch/mips/cavium-octeon/setup.c +++ b/arch/mips/cavium-octeon/setup.c @@ -8,6 +8,7 @@ * written by Ralf Baechle <ralf@xxxxxxxxxxxxxx> */ #include <linux/compiler.h> +#include <linux/vmalloc.h> #include <linux/init.h> #include <linux/kernel.h> #include <linux/console.h> @@ -1139,3 +1140,30 @@ static int __init edac_devinit(void) return err; } device_initcall(edac_devinit); + +static void __initdata *octeon_dummy_iospace; + +static int __init octeon_no_pci_init(void) +{ + /* + * Initially assume there is no PCI. The PCI/PCIe platform code will + * later re-initialize these to correct values if they are present. + */ + octeon_dummy_iospace = vzalloc(IO_SPACE_LIMIT); + set_io_port_base((unsigned long)octeon_dummy_iospace); + ioport_resource.start = MAX_RESOURCE; + ioport_resource.end = 0; + return 0; +} +arch_initcall(octeon_no_pci_init); + +static int __init octeon_no_pci_release(void) +{ + /* + * Release the allocated memory if a real IO space is there. + */ + if ((unsigned long)octeon_dummy_iospace != mips_io_port_base) + vfree(octeon_dummy_iospace); + return 0; +} +late_initcall(octeon_no_pci_release); diff --git a/arch/mips/pci/pci-octeon.c b/arch/mips/pci/pci-octeon.c index 95c2ea8..59cccd9 100644 --- a/arch/mips/pci/pci-octeon.c +++ b/arch/mips/pci/pci-octeon.c @@ -586,15 +586,16 @@ static int __init octeon_pci_setup(void) else octeon_dma_bar_type = OCTEON_DMA_BAR_TYPE_BIG; - /* PCI I/O and PCI MEM values */ - set_io_port_base(OCTEON_PCI_IOSPACE_BASE); - ioport_resource.start = 0; - ioport_resource.end = OCTEON_PCI_IOSPACE_SIZE - 1; if (!octeon_is_pci_host()) { pr_notice("Not in host mode, PCI Controller not initialized\n"); return 0; } + /* PCI I/O and PCI MEM values */ + set_io_port_base(OCTEON_PCI_IOSPACE_BASE); + ioport_resource.start = 0; + ioport_resource.end = OCTEON_PCI_IOSPACE_SIZE - 1; + pr_notice("%s Octeon big bar support\n", (octeon_dma_bar_type == OCTEON_DMA_BAR_TYPE_BIG) ? "Enabling" : "Disabling"); -- 1.8.3.2
