Add support for the Netgear CVG834G and enable the two UARTs, Ethernet
on the first MAC, PCI and the two leds.
Signed-off-by: Florian Fainelli <florian@xxxxxxxxxxx>
---
arch/mips/bcm63xx/boards/board_bcm963xx.c | 35 +++++++++++++++++++++++++++++++
1 file changed, 35 insertions(+)
diff --git a/arch/mips/bcm63xx/boards/board_bcm963xx.c b/arch/mips/bcm63xx/boards/board_bcm963xx.c
index 611a420..d3304dc 100644
--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
@@ -37,6 +37,38 @@
static struct board_info board;
/*
+ * known 3368 boards
+ */
+#ifdef CONFIG_BCM63XX_CPU_3368
+static struct board_info __initdata board_cvg834g = {
+ .name = "CVG834G_E15R3921",
+ .expected_cpu_id = 0x3368,
+
+ .has_uart0 = 1,
+ .has_uart1 = 1,
+
+ .has_enet0 = 1,
+ .has_pci = 1,
+
+ .enet0 = {
+ .has_phy = 1,
+ .use_internal_phy = 1,
+ },
+
+ .leds = {
+ {
+ .name = "CVG834G:green:power",
+ .gpio = 37,
+ .default_trigger= "default-on",
+ },
+ },
+
+ .ephy_reset_gpio = 36,
+ .ephy_reset_gpio_flags = GPIOF_INIT_HIGH,
+};
+#endif
+
+/*
* known 6328 boards
*/
#ifdef CONFIG_BCM63XX_CPU_6328
@@ -643,6 +675,9 @@ static struct board_info __initdata board_DWVS0 = {
* all boards
*/
static const struct board_info __initconst *bcm963xx_boards[] = {
+#ifdef CONFIG_BCM63XX_CPU_3368
+ &board_cvg834g,
+#endif
#ifdef CONFIG_BCM63XX_CPU_6328
&board_96328avng,
#endif
--
1.8.1.2
