Add the firmware header format which is used by Broadcom Cable Modem
SoCs such as the BCM3368 SoC. We export the bcm_hcs firmware format
structure because it is used by user-land tools to create firmware
images for these SoCs and will later be used by a corresponding MTD
parser.
Signed-off-by: Florian Fainelli <florian@xxxxxxxxxxx>
---
arch/mips/bcm63xx/boards/board_bcm963xx.c | 14 ++++++++++++--
include/uapi/linux/Kbuild | 1 +
include/uapi/linux/bcm933xx_hcs.h | 24 ++++++++++++++++++++++++
3 files changed, 37 insertions(+), 2 deletions(-)
create mode 100644 include/uapi/linux/bcm933xx_hcs.h
diff --git a/arch/mips/bcm63xx/boards/board_bcm963xx.c b/arch/mips/bcm63xx/boards/board_bcm963xx.c
index a9505c4..46eabb9 100644
--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
@@ -28,8 +28,12 @@
#include <bcm63xx_dev_usb_usbd.h>
#include <board_bcm963xx.h>
+#include <uapi/linux/bcm933xx_hcs.h>
+
#define PFX "board_bcm963xx: "
+#define HCS_OFFSET_128K 0x20000
+
static struct board_info board;
/*
@@ -722,8 +726,9 @@ void __init board_prom_init(void)
unsigned int i;
u8 *boot_addr, *cfe;
char cfe_version[32];
- char *board_name;
+ char *board_name = NULL;
u32 val;
+ struct bcm_hcs *hcs;
/* read base address of boot chip select (0)
* 6328/6362 do not have MPI but boot from a fixed address
@@ -747,7 +752,12 @@ void __init board_prom_init(void)
bcm63xx_nvram_init(boot_addr + BCM963XX_NVRAM_OFFSET);
- board_name = bcm63xx_nvram_get_name();
+ if (BCMCPU_IS_3368()) {
+ hcs = (struct bcm_hcs *)boot_addr;
+ board_name = hcs->filename;
+ } else {
+ board_name = bcm63xx_nvram_get_name();
+ }
/* find board by name */
for (i = 0; i < ARRAY_SIZE(bcm963xx_boards); i++) {
if (strncmp(board_name, bcm963xx_boards[i]->name, 16))
diff --git a/include/uapi/linux/Kbuild b/include/uapi/linux/Kbuild
index ab5d499..ba1c11a 100644
--- a/include/uapi/linux/Kbuild
+++ b/include/uapi/linux/Kbuild
@@ -62,6 +62,7 @@ header-y += auxvec.h
header-y += ax25.h
header-y += b1lli.h
header-y += baycom.h
+header-y += bcm933xx_hcs.h
header-y += bfs_fs.h
header-y += binfmts.h
header-y += blkpg.h
diff --git a/include/uapi/linux/bcm933xx_hcs.h b/include/uapi/linux/bcm933xx_hcs.h
new file mode 100644
index 0000000..d228218
--- /dev/null
+++ b/include/uapi/linux/bcm933xx_hcs.h
@@ -0,0 +1,24 @@
+/*
+ * Broadcom Cable Modem firmware format
+ */
+
+#ifndef __BCM933XX_HCS_H
+#define __BCM933XX_HCS_H
+
+#include <linux/types.h>
+
+struct bcm_hcs {
+ __u16 magic;
+ __u16 control;
+ __u16 rev_maj;
+ __u16 rev_min;
+ __u32 build_date;
+ __u32 filelen;
+ __u32 ldaddress;
+ char filename[64];
+ __u16 hcs;
+ __u16 her_znaet_chto;
+ __u32 crc;
+};
+
+#endif /* __BCM933XX_HCS */
--
1.8.1.2
